
Restoring Cabinets with Paint
- Remove as much of the old finish as possible with a paint stripper. Then use a sharp scraper, where needed, to remove all traces of the old finish.
- Next, use wood filler to repair any dents, scratches, or other forms of surface damage.
- When newly smoothed surfaces are dry, finish off with sandpaper —100 grit, then 180 grit, and finally, 220-grit.
- Paint in whatever color you like; before applying sealer, clean surfaces with a tack cloth.
- When the sealer dries, rub surfaces lightly with 000 steel wool and use tack cloth to remove residual dust.
What is the best clear finish for cabinets?
- Consider that polyurethane tends to accentuate any surface imperfections. ...
- Stir the polyurethane and apply it in long, overlapping strokes. ...
- Wait for the sealer to cure—and while you’re waiting, take pains not to let any dust or debris settle on the drying cabinets.
How to refinish cabinets without sanding?
- Buy a cabinet painting kit and get the paint tinted to your preference. ...
- Make a diagram of the cabinets, numbering each cabinet and drawer front. ...
- With soap and water, wash and wipe clean cabinet doors, drawer fronts, and cabinet surfaces to be painted, paying extra attention to greasy spots.
How to restore cabinet finish?
Things You Will Need
- Screwdriver
- Small can
- Mineral spirits
- Clean rag
- Tack cloth
- Touch-up pen
- Varnish paintbrush
- Stain-and-polyurethane combination product
- Stir stick
How to restore old cabinets?
How to Restore Old Cabinets
- Remove Hardware. If your buying cabinets and restoring them look specifically for good hardware. ...
- Strip Stain. Paint stripper is pretty cheap and can be bought at any hardware store. ...
- Sand. ...
- Stain. ...
- Brush and Restain. ...
- Clean Hardware. ...
- Reinstall Hardware/Cabinets. ...
- Finished! ...

How do you fix worn finish on kitchen cabinets?
0:273:19$5 Fixes Easily Update Worn, Scratched Kitchen CabinetsYouTubeStart of suggested clipEnd of suggested clipThen you'll want to start with a paintbrush to get into the molding. And kind of dust off any dirtMoreThen you'll want to start with a paintbrush to get into the molding. And kind of dust off any dirt that's built up over time. This really gets into that molding.
How do you touch up cabinet finishes?
3:536:07Touch up for stained product - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt with just a light coat of the lacquer let the lacquer dry for a few minutes then come back andMoreIt with just a light coat of the lacquer let the lacquer dry for a few minutes then come back and add the color. Again you can keep building or laying the coloring that way.
How do you repair stained cabinets?
0:112:05Refreshing A Worn Wood Cabinet With A Stain Marker - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay you can see I've had this for a long time but it's a golden oak Minwax stain marker they sellMoreOkay you can see I've had this for a long time but it's a golden oak Minwax stain marker they sell these in all different colors. The key is to pick a similar color to your cabinets.
How do you touch up old stained cabinets?
Apply a marker to flaws that match the color of the cabinetry staining. Fill in dents and worn spots with a putty. Apply a new coat of paint, or re-stain the cabinets to restore its former look and feel. Use a polyurethane coating to assist with the removal of cabinet imperfections.
How can I restore my kitchen cabinets without sanding and varnishing?
0:265:20Refinish Kitchen Cabinets Without Stripping - YouTubeYouTubeStart of suggested clipEnd of suggested clipTaking out all the shells. Removing the knobs or handles. And taking off the hinges. Most of theMoreTaking out all the shells. Removing the knobs or handles. And taking off the hinges. Most of the time when I do a cabinet facelift like this I find myself updating the hardware.
How do you fix plastic coated cabinets?
If the melamine coating has only come loose in a few areas, you can reattach it using an instant adhesive, such as Super Glue or Krazy Glue. You can use instant glue to reattach peeling melamine coating on a cabinet.
How do you repair damaged wood cabinets?
0:415:35Fix a Hole or Chipped Cabinet - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can fill this in now these are actually a little plant sticks. But you could use paint sticksMoreSo you can fill this in now these are actually a little plant sticks. But you could use paint sticks you could use a tongue depressor. Whatever. You have that's large enough to go along this edge.
How do you make stained cabinets look new?
If you like a darker tone: First clean your cabinets with a mix of TSP and water. Once they're dry, sand the cabinets lightly and use a tack cloth to remove dust. Then apply a polyurethane varnish (tinted to whatever tone you find appealing). This varnish-stain combo is likely to do the job in one application.
How do you touch-up cabinets?
1:439:51Cabinet TOUCHUPS! The Art of Touch-Ups - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a white China bristle brush. And we use white instead of black because. These are moreMoreThis is a white China bristle brush. And we use white instead of black because. These are more softer.
How do you fix chipped polyurethane on kitchen cabinets?
The best way to fix this is to lightly sand the chipped areas using a small piece of high-grit sandpaper to lightly sand the chipped areas. 320 grit sandpaper works well for this; it is fine enough to lightly smooth the damaged paint without removing too much extra paint.
Can you Restain cabinets without stripping?
Applying polyurethane over the stained surface is the easiest part when it comes to refinishing kitchen cabinets without stripping them. Apply one coat, allow it time to dry, and apply another coat. Repeat this process until you are satisfied with the results. Two or three coats will give you a beautiful finish.
Can I sand and Restain my kitchen cabinets?
Sand your cabinets with 200-grit fine sandpaper to remove any peeling varnish and to roughen up the stained surfaces. This provides a better bonding surface for the new stain or paint to adhere to. Wipe off the sanding dust with a clean cloth. Apply a paint primer to the cabinets if you're going to paint them.
How to fix a worn out kitchen cabinet?
Before you fix worn spots on your kitchen cabinet, it’s important to conduct a visual inspection first. Look at the cabinet inside and out. Look for signs of dents, chips, peeling, and water stains, among other kinds of cosmetic problems. While you’re at it, clean your cabinet with a damp cloth. You may also apply a wood cleaning solution ...
How to get rid of stubborn stains on kitchen cabinets?
If the excess stains are stubborn or difficult to remove, you can formulate your cleaning solution. Mix equal parts of white vinegar and water in a pan. Then dampen the cleaning pad or rag with it. You can now use the cleaning tool in scrubbing the excess and stubborn stains on the kitchen cabinet.
How to prevent kitchen cabinets from peeling?
Wipe off surfaces with a dampened cloth and diluted vinegar. You may also apply a layer of protective sealant that would prevent cracking and peeling of the kitchen cabinet surface.
What causes dried stains in kitchen cabinets?
Excess dried stains can come from numerous sources like water and food. These stains can affect the good looks of your kitchen cabinets. In the long run, it can also impact the integrity of the cabinet.
How to get stains out of wood cabinets?
Mix one part baking soda with two parts water, then dab it on the dirty spots. Let the paste stay for a few minutes before wiping it away with a clean cloth. If those methods prove to be ineffective, you may also use a lacquer thinner to remove stains from a wooden cabinet.
What are kitchen cabinets?
Kitchen cabinets are one of the first things you’ll notice when you step into any kitchen. It not only serves as a storage for food, spices, and dishes, but it can also set the tone for the style and theme of a kitchen. But like in any other part or component of the house, kitchen cabinets won’t look good forever.
How to get rid of greasy smears on kitchen door?
To do this, select a door that’s not too prominent. Take it down, remove its knob, and wash the surface in warm water mixed with detergent. This would remove the greasy smears quite common on kitchen surfaces. Wipe off the residue and let the surface dry.
Renew Your Cabinets
Cabinets are frequently slammed shut, yanked open and bumped into, especially in the kitchen. Even after a few years, newly finished cabinets can show visible wear and tear. The easiest way to update your kitchen without committing to big-ticket changes: cabinet finish restoration.
Overview of Cabinet Finish Restoration Process
The technicians at Furniture Medic work with you, on your time, to determine when work can begin. Usually, cabinet finish restoration work is completed entirely on-site, and we take precautions to keep dust, particles and other project materials out of your living spaces.
Find a Cabinet Finish Restoration Expert Near You
Does your current kitchen sound like a good fit for finish restoration? Find your local Furniture Medic technician to talk about estimates and timelines.
What to do if your cabinet is warped?
For instance, if a cabinet shelf, drawer box or any of the doors and drawers have warped, you usually need a cabinetmaker or carpenter.
How to get a close color match on a cabinet?
Start with a color slightly lighter than the cabinet's finish and then layer darker markers until the scratch is no longer obvious. Test markers in an inconspicuous area first to ensure a close color match. 2.
Why won't my cabinet door close?
A cabinet door that doesn't close or that doesn't stay closed is often caused by a problem with one of the hinges. Check the hinges to see if any of them are loose or no longer flat against the cabinet or cabinet door. If a hinge is loose, the most common cause is a loose screw or two.
What is a fill stick for cabinet?
A fill stick, available at most hardware stores, comes in handy for filling tiny holes, such as old screw holes or gouge marks on a door or drawer front.
How to get rid of excess marker ink?
Wipe away excess marker ink with a soft cloth if necessary before it dries. If you don't know the name of your cabinets' finish, pick up a set of wood-repair markers from a home improvement store. These usually include markers in common natural-wood finishes.
Do you need to paint scratches on kitchen cabinets?
Minor scrapes and scratches on kitchen cabinets and countertops usually don't need paint or stain and are simple enough to be a DIY home improvement project with very little out-of-pocket expense. If you still have the original literature that came with your cabinets, look for the manufacturer and any information about the cabinet finish. Check with the original retailer or on the manufacturer's website for a touch-up kit or scratch-repair marker that matches your type of finish. Some cabinet retailers even include these with the cabinets since minor dings are bound to happen during the installation process.
Can you replace a cabinet door with a manufacturer part?
If a cabinet door or box is beyond a simple repair, it's usually easiest and cheapest to simply replace it with a manufacturer part, but if the cabinets were custom built, you may need to have a skilled carpenter or cabinetmaker craft an identical replacement part.
How to get rid of greasy smears on kitchen door?
Choose a door that needs attention but is not prominent. Take down the door, remove the knob and wash the surface with detergent in warm water to remove the greasy smears common on kitchen surfaces. Wipe off the residue, go over the surface with a clean cloth and clean water, and let it dry.
Can you sand wood with a power sander?
Individual pieces of wood, even from the same species, vary in color, so if the match isn’t perfect, people probably won’t notice. Although it’s faster to sand off old finish with a power sander, it’s safer to do it by hand, using sandpaper attached to a sanding block.
