How to Repair a Broken Car Radio CD Player
- Sound Quality. If your auto CD player is having sound quality issues, then there are a few things that could be wrong with it.
- Skipping Problems. If the disc you are listening to is skipping, then take it out and examine the CD. ...
- Disc Recognition. If you find that the discs you put in are not being recognized, then you may be putting them in the wrong way.
- Loading Door. If the door is having issues opening or closing, then it could be a problem with your drawer loading belt.
Why does my CD player not work on my car?
Why does my CD player not work on my car? This is a common problem if the CD player works well, but the radio itself does not work. The problem might be with the antenna wire. A broken antenna will not receive signals, and therefore you will only be hearing white noise. Check the antenna wire, it might be disconnected and might need a little ...
How do you fix a car CD player?
So, on how to fix a car CD player that won’t read, start by:
- Removing the DVD lens cleaner from the packet.
- Then loosen the cap from the liquid bottle and dispense 3 to 4 drops onto the small brush at the disc bottom.
- Insert it into the car stereo disc slot with the brush side facing downwards on the disc. ...
- Press play on the car stereo and let it play through the first track. ...
How do you reset a CD player in a car?
How do I reset my car CD player? Hold the power and eject buttons simultaneously. Most car audio systems have a reset feature of sorts for their CD drive. Start by turning your car on, and then turning it off. With the car off, hold the stereo power button and the eject button simultaneously for at least 10 seconds.
How do you clean car CD players?
Method 1 Method 1 of 2: Cleaning a CD Player
- Confirm there is no CD in the player. If the CD drive is tray-loaded, open the tray and disconnect the power cable without switching it off from the power ...
- Blow away dust with a handheld air bulb. These rubber bulbs are sold as dust blowers in places that stock cameras or jeweler's equipment.
- Remove the lens cover. ...
- Select a lint-free cleaner. ...
How do you fix car CD player that won't read CDs?
Verify the disc is inserted into the CD player properly. The disc may eject if inserted upside down. Press the RESET button on the front of the car stereo. Try a couple of different discs just to make sure there is not a problem with the disc that you are trying to play.
Can a CD player be repaired?
In fact, there is little you can do besides clean the CDs, clean the machine, or replace cords. Just about everything else should be turned over to an electronics technician. You can use a CD repair kit, available where CDs are sold, to polish out scratches on the underside of the disc.
What causes a CD not to play?
If the disc still will not play, depending on the location of your CD player, the issue can also be caused by condensation. Open the disc compartment and let the unit sit for about one hour to allow any condensation to dissipate. If the unit does not play any of the discs, the laser pick up may be dirty.
How long should a CD player last?
Hi-fi systems--or at least the speakers, turntable, and amplifier parts of those systems--should last a good deal longer, figure 10 to 20 years. CD players aren't as long-lived, though they can deliver 5 to 10 years of service.
Can a Bose CD player be repaired?
The answer to this question should be no. Even though the website tells you that the Geek Squad will repair Bose products, i.e. the CD player, They do not. No one buys those CD players anymore, so they can't be bothered. Parts may not be available, etc.
How long does a CD player laser last?
The lifespan of the laser pickup is usually 10-15 years.
How to fix a CD player?
If the door of your CD player sticks or otherwise doesn't work properly, try the following troubleshooting ideas: 1 Open the bottom of the player and remove the optical deck. Make sure to use jeweler's screwdrivers and carefully store the screws that you remove (they are tiny!). Examine the drawer mechanism for loose or broken parts. If there's a belt, check that it is still attached and tight. Replacing the belt is an easy and cheap fix. 2 Examine all gears and observe the electric motors for any burn marks or damage. Apply silicone grease to moving parts. If the door is noisy, you can also put a drop of electric motor oil inside the electric motors to quiet them. 3 Many CD players have a lock attached to the door that is used to protect the device during shipping. Check that the lock is not in place or otherwise blocking the sled drive from extracting the CD. 4 If the inner workings are somewhat dirty, this could be the cause of the problems. Using either an air compressor with an air gun attachment or a toothpick, try to remove dirt and grime from the gears and other moving parts. Lubricate the moving parts with silicone grease to aid operation.
How to keep CD players from being noisy?
Apply silicone grease to moving parts. If the door is noisy, you can also put a drop of electric motor oil inside the electric motors to quiet them. Many CD players have a lock attached to the door that is used to protect the device during shipping.
How to fix a broken drawer belt?
Replacing the belt is an easy and cheap fix. Examine all gears and observe the electric motors for any burn marks or damage. Apply silicone grease to moving parts.
Why is my CD skipping?
This is commonly caused by dirty or damaged tracks on the disc. Before assuming that the problem is with the player, test a few newer CDs and see if the skipping behavior continues. If it doesn't, the the problem is the disc and you'll need to look into cleaning or repairing the disc so that it can play normally again.
What does a player do when a disc is inserted?
The first thing a player does when a disc is inserted is spin the disc to move the read head across it and If it can't do that it just spits it out. With the age of your stereo it would be more convenient and economical to just replace and upgrade your sound system to a USB drive stereo.
Is a CD player an electronic device?
Just because a car CD player is electronic doesn't mean that you should be afraid to open it up and attempt to do your own repairs. Many people assume that a CD player is a complicated electronic device, but that couldn't be further from the truth. The player is actually made up of just a few mechanical parts that can break, ...
Why is my CD player not reading?
1. Damaged lens: After playing the lens cleaner CD, if the CD player still not reads the CD, it indicates that the lens is damaged. In that case, you might think about buying a new lens. However, when you check the cost of a new lens, you will realize that it is a significant component of the car CD player’s cost.
Is it a good idea to buy a CD player?
Instead of making that mistake, it is a good idea to buy a new car CD player. These are the 3 situations in which buying a new car CD player makes sense. In most cases, however, after following the above procedure, you will not have to worry about such problems.
Can you buy a CD player separately?
You will get that along with the car CD player. Not only that, you can buy it online separately as well. 2. after that, you have to take the lens cleaning solution and apply few drops to the brush assembly attached to the disc. 3. after that, you have to put the disc into the slot.
Can a car CD player read CDs?
Once you fix the lens, it is likely to read most of the CDs you play. In the unlikely scenario that the car cd player still does not read the CD, you might think about calling a professional to repair it.
Does a CD player read a lens cleaning CD?
Need to hire an professional: If after running the lens cleaning CD, the CD player still does not read the CD, you might need to hire a professional for the same. At the most, you can look through the car CD player manual for troubleshooting tips. If even after trying these steps, still the CD player does not work, ...
7 Common Reasons Car CD Player Stop Working
There are many reasons why a car cd player may stop working. Below is listed the 10 most common causes of this issue:
Conclusions
If you’re experiencing issues with your car CD player, have no fear! In this blog post on how to fix a car cd player that won’t load or eject discs, we’ve compiled a list of five ways to fix this problem. Give these methods a try before you take it into the shop and end up paying for unnecessary repairs. If you’re still stuck, then let us know.
How do you fix a car CD player error 1?
An open CD player with a CD on the disk tray. When an “Error 1” appears on the LCD screen of a CD player, the fact that the disc tray will not exit the chassis will explain the meaning behind the code. To fix an “Error 1,” lubricate a part of the CD player that controls how the tray functions.
How do you reset a CD player in a car?
Hold the power and eject buttons simultaneously Most car audio systems have a reset feature of sorts for their CD drive. Start by turning your car on, and then turning it off. With the car off, hold the stereo power button and the eject button simultaneously for at least 10 seconds.
Can a car CD player be fixed?
Silence may seem less than golden when your car CD player suddenly stops working. But most of the time a car CD player can be repaired easily with minimal fuss and hassle.
Why does my car CD player keep saying error?
Sometimes a CD player will display a “No Disc” error. What this means is that the CD player, for some reason, does not recognize the disc. There are various reasons for this error, from the CD lens eye being dirty to a CD format that is incompatible with the player.
Why would a CD player stop working?
A scratched or damaged disc is often the culprit and not the player. Use a newer disc if possible to ensure the condition is pristine. If the problem persists with the new disc, remove all discs and run a power cycle to reset the player. Remove any batteries or unplug it to drain the power.
What does CD error mean?
Sometimes a CD player will display a “ No Disc” error. What this means is that the CD player, for some reason, does not recognize the disc. There are various reasons for this error, from the CD lens eye being dirty to a CD format that is incompatible with the player.
What does check CD mean?
A certificate of deposit (CD) is a product offered by banks and credit unions that provides an interest rate premium in exchange for the customer agreeing to leave a lump-sum deposit untouched for a predetermined period of time.
What to do if CD player doesn't work?
If a CD player works but produces no sound, check the connections to the stereo system and clean the clear plastic reading lens. If a CD player skips, check to be sure the CD itself is not scratched or dirty. If a CD player tray won’t open or close properly, check the belt for dirt or wear and check the tray for misalignment (remove, clean, ...
How to clean CD lens?
Clean the CD player lens: To access the lens in a single-play unit, remove the housing and carefully lift up the hold-down clamp to expose the lens. To remove the lens in a carousel player, remove the player housing and unscrew the bracket secured to the top of carousel, then lift off the bracket. Remove dust with canned air or a soft brush.
How to clean a travel rail?
Clean the travel rail and guides with a swab dampened with denatured alcohol. Lubricate the tray sparingly with white lithium grease. Remove the belt to inspect for dirt, water, or damage. Avoid touching the belt with your fingers. Use tweezers or wear cotton gloves.
How to remove clip on tray?
To remove the clip-on tray front, brace the tray and slide the panel to one side. Unplug any cables connecting the front panel to the interior. Remove the screws securing the front panel and gently tilt it off. If the panel won’t move, check beneath it for clips or additional screws.
How to clean a motor tray?
To clean the motor plug, unplug it and spray it with electrical contact cleaner. Then repeatedly plug and unplug the unit to verify contact. To remove the motor, depress the end of each clip or bale with a finger and lift it up.
What is a compact disc player?
A compact disc player uses a central motor to rotate the disc while the lens reads digital information imprinted on the bottom of the disc.
Can you clean a CD player?
CD players have few moving parts and are mostly trouble free. In fact, there is little you can do besides clean the CDs, clean the machine, or replace cords . Just about everything else should be turned over to an electronics technician.
Materials Needed
- Cable
- Contact Cleaner
- Soft Cloth
- Drawer Loading Belt
- Cable
- Contact Cleaner
- Soft Cloth
- Drawer Loading Belt
Step 2 – Skipping Problems
- If the disc you are listening to is skipping, then take it out and examine the CD. If the CD is dirty or scratched, then this could be the problem. However, if your CD is clear of debris and scratches, then it may be the laser lens. Test it out on multiple CDs that are clean. If there is skipping with all of them, then you will need to clean your laser lens.
Step 3 – Disc Recognition
- If you find that the discs you put in are not being recognized, then you may be putting them in the wrong way. Make sure that the CDs you are putting in are being put in right side up. The label should be on top when entering it into your player. You may also need to clean your laser lens or unengaged the transportation lock. The lock will be a screw that is on the bottom of your unit.
Step 4 – Loading Door
- If the door is having issues opening or closing, then it could be a problem with your drawer loading belt. You will need to make sure that the belt is elastic and tight, if it is not, then it is time to replace it. You will be able to find these belts at most electronic part stores. You will want to make sure that the replacement belt you get is one that has the same amount of thickness or just a litt…