how to repair chipped trim

How to Repair Paint Chips on Wood Trim

1. Clean the Trim. Squirt a little bit of dish soap into 2 cups of water, and stir it. Dish soap contains degreasers...
2. Sand the Edges. Sand the edges of the chipped paint using a fine-grit sandpaper, advises Better Homes & Gardens. Use...
3. Apply Wood Filler. Apply wood filler to deeper chips, using a craft stick to trowel in a...

Full Answer

How to repair chipped paint on wood trim?

How to Repair Paint Chips on Wood Trim 1. Squirt a little bit of dish soap into 2 cups of water, and stir it. Dish soap contains degreasers that will remove... 2. Sand the edges of the chipped paint. Use a light hand to gently feather the edges of the chip so that the repair will... 3. Apply wood ...

How to repair damaged trim molding?

Or a pet could chew or scratch trim molding. Save yourself some money and repair damaged molding yourself, rather than replacing it. Here’s how. If edges of the damaged trim molding are raised, use sandpaper to smooth them. Then you can apply the wood filler smoothly. With your putty knife, apply wood filler.

How do you fix dents in wood trim molding?

If your wood filler is water-based, use a wet finger to smooth the wood filler. Allow the filler to dry for 24 hours. For a smaller area of damage (such as dents and cracks in your trim molding), buy wood putty. To patch larger areas, use an epoxy filler.

How do you fix a chipped paint on a crater?

1 Fill Surface Using a putty knife, scoop out some Ready Patch and smooth it over the surface of the crater left by the chipped paint. ... 2 Sand Smooth Ready Patch will be ready for sanding in anywhere from just a few minutes for small patches to an hour or more for very large patches. ... 3 Prime & Paint

How do you fix nicks in wood trim?

2:235:18Wednesday Workbench: Wood Trim Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt takes a little more time grab your wood filler mm-hmm. Find the gouge squeeze. Some on there.MoreIt takes a little more time grab your wood filler mm-hmm. Find the gouge squeeze. Some on there. Between the dodges here.

How do you fix a trim dinged?

0:332:48How to repair damaged baseboards - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut wood fibers pressed. Together first thing i'm going to do is spread on some joint compound. AndMoreBut wood fibers pressed. Together first thing i'm going to do is spread on some joint compound. And sometimes it's hard to stick. So you might want to just use your fingers to get it into the fibers.

How do you fix a chipped MDF trim?

5:2110:02How To Fix A Chip In MDF Baseboard - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust put a little bit on there to fill that in that there's a bit shallow.MoreJust put a little bit on there to fill that in that there's a bit shallow.

How do you fill nicks in trim?

InstructionsApply the Filler With Your Finger. For most nail holes, the space to fill is so small that it is best to use your finger. ... Apply the Filler With a Putty Knife (Optional) Deeper or larger holes may require the assistance of a putty knife. ... Sand With Your Finger. ... Finish With Sandpaper. ... Remove the Sanding Dust.

How do you fix nicks in a door frame?

0:112:07How to Fix Gouges & Dents on Doors - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I'm going to start by scooping out a bit of rezident. Something about the size of a golf ball.MoreAnd I'm going to start by scooping out a bit of rezident. Something about the size of a golf ball. This is the hardener I'll lay down a bead about an inch long. And then blend the two together.

How do you fix dog chew on wood trim?

You can use an epoxy wood filler to repair the gouges as well. For this you can use something like LePage Wood Filler. You can pick out different tints as well to better match your wood trim. Then you can go in with your sand paper and sand it until it's smooth.

How do you fill a chipped MDF?

1:156:59How to Repair MDF - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you want to be pushing. In the edge of the MDF. So that it's compressed and it's got a sharp edgeMoreSo you want to be pushing. In the edge of the MDF. So that it's compressed and it's got a sharp edge. And it wants to be enough of a dugout shape that it will receive the filler.

How do you fix chips in MDF?

Remove dust or small particles by vacuuming the surface. ... Lightly brush a water-based or oil-based paint primer onto the damaged surface. ... Use a putty knife to spread wood putty, also called wood filler, over the scratches and gouges. ... Sand the damaged area until smooth. ... Wipe away sanding dust with a tack cloth.

How do you fix chips in skirting boards?

0:201:45How To Repair Damaged Skirting Boards & Doorframes - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor an easier application and apply the filler smooth. Down any excess. Product using a spreader andMoreFor an easier application and apply the filler smooth. Down any excess. Product using a spreader and clean your tool after application allow roughly 24 hours for the filler to dry.

Can I use spackle instead of wood filler?

Yes, spackling can work as a filler in some applications. For instance, you can use the vinyl spackling paste for filling cracks or superficial holes on interior wood surfaces instead of water-based wood filler.

Can you use wood filler on baseboards?

0:175:57Where to Use Caulk, Wood Filler, or Spackling on Wood Trim ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo really the key to getting a great look or a great result with any trim work that you add to yourMoreSo really the key to getting a great look or a great result with any trim work that you add to your house whether it's baseboards crown molding wainscoting or something like this coffered ceiling.

Can you use spackle on baseboards?

0:536:03How to Use Caulk and Spackle on Wood Trim and Molding - YouTubeYouTubeStart of suggested clipEnd of suggested clipTreatment. So you can do this to patch old woodwork like your old baseboards. Or trim around doors.MoreTreatment. So you can do this to patch old woodwork like your old baseboards. Or trim around doors. If it's looking kind of shabby.

How do you get scratches out of wood trim?

0:081:41Repairing scratches in wood trim - restoring finish with ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I'm doing is I'm actually using what's called overstory finish and after you clean it withMoreSo what I'm doing is I'm actually using what's called overstory finish and after you clean it with TSP cleaner you want to go through and start wiping it down to restore that lacquer.

How do you fix a chewed baseboard?

Chewed corners on decorative baseboards: sand the damaged section of the baseboard until everything is flush with the non damaged section. ... With your putty knife or finger, apply wood filler onto the area that's missing. ... Before the wood filler is completely hard, mold curves and edges with your ruler or dowel.More items...•

How do you fill gouges in wood?

0:525:10How to Fill in Dents & Gouges in Wood Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just want to lightly rub over it with your finger. So that it feathers into your existing finishMoreYou just want to lightly rub over it with your finger. So that it feathers into your existing finish. Then you want to select your heart fill stick.

What is the Difference Between Trim and Molding?

Put simply, trim is a general term that refers to all molding in a home. This can include:

Different Trim and Molding Materials

While molding may have historically been made out of solid wood, today many materials are used to create window trim, baseboards, and crown molding. Before we dive into what you need to know about DIY interior trim repair, it’s helpful to have an understanding of the different kinds of trim.

Common DIY Interior Trim Repairs

All different kinds of trim might require repairing—for instance, window trim might sustain water damage or baseboard trim could be easily scratched and dented. Additionally, since crown molding is tricky to install because the angels need to be cut carefully, sometimes it may need a little TLC as well.

The Mr. Handyman of Keller Difference

Perhaps reading this blog has inspired you to DIY your molding and interior trim repairs. However, at Mr. Handyman of Keller, we understand that not everyone enjoys tackling home improvement tasks by themselves—or, has the time to do so. That’s why our skillful and professional technicians are available to help with your interior trim repairs.

Book an Interior Trim Repair Service Today!

Having finished reading this guide, you may have gained the confidence to repair your damaged molding on your own. Otherwise, you may be excited to enhance your home’s interior but need a little extra support.

What can damage trim molding?

Bowl. Water. Sandpaper. Paint. Because trim molding is often made from softer woods, you can easily damage it. You might damage it by moving furniture or vacuuming. Or a pet could chew or scratch trim molding.

How long does wood filler dry?

If your wood filler is water-based, use a wet finger to smooth the wood filler. Allow the filler to dry for 24 hours. For a smaller area of damage (such as dents and cracks in your trim molding), buy wood putty. To patch larger areas, use an epoxy filler.

How do I clean paint off wood trim?

Scrub with a sponge dipped in the cleaning solution. Then rinse with a spo nge and clear water and wipe off the wood with a dry rag. If there’s paint slopped onto the edges of your trim or spattered on the surface, now’s the time to clean it off.

How to fix scratches on wood?

Hide scratches, chips and worn away finish with a fresh dose of stain. Then wipe the woodwork with a clean rag to remove the excess stain. Let the stain dry overnight. Completely refinishing the area may be the only way to make flawless repairs to badly damaged doors, windows and moldings.

How to get rid of excess polyurethane on wood?

Fold a cotton rag to create a pad. Then dip an edge of the pad into a container of wipe-on polyurethane and press it against the side to wring out the excess. Wipe the polyurethane onto the wood in long strokes in the direction of the wood grain as you would if you were using a brush.

How do I renew a stained wood baseboard?

The first step in renewing your woodwork and stained baseboards is cleaning it to remove grease and grime and create a contaminant-free surface for the new finish. Wash the woodwork with a TSP substitute.

Is it better to wipe on polyurethane or brush on polyurethane?

The final step in your trim renewal project is to apply a fresh coat of finish. Wipe-on polyurethane is a good choice because it’s fast and easy to apply. You simply wipe it on with a soft rag and let it dry.

How to get spackle off of wall?

Gently scrape away excess spackle from the wall while holding your putty knife at a 90-degree angle to the wall. Be careful not to remove the spackle from the imperfection as you do this! Use a damp cloth to remove any excess spackle from the wall that your putty knife did not remove before the spackle dries.

Is it normal for baseboards to get dirty?

Baseboards get dirty, chipped and dinged over time. It's totally normal. But, worn baseboards can make your otherwise beautiful room look kind of worn out. No one wants that! And baseboards can really take a beating during home renovations.

How to fix chipped paint on a wall?

Step 1 Fill Surface . Using a putty knife, scoop out some Ready Patch and smooth it over the surface of the crater left by the chipped paint. Work it in several directions to fill any nooks and crannies. Also, make sure to overfill the area a little so that when you’re ready to sand, you can sand it down to a completely level surface.

How long does it take to sand a ready patch?

Ready Patch will be ready for sanding in anywhere from just a few minutes for small patches to an hour or more for very large patches . You’ll notice the color changes from a grayish to bright white once it’s dry

What is ready patch?

Ready Patch works just like spackle, but is intended for use patching wood and other materials instead of drywall like regular spackle. It is inexpensive, needs easy water clean up, and dries pretty quickly. Whether it’s baseboards, casings, doors, or windows, this patch works great for any piece of trim with caked on paint. ...

What to do when you fill a patched area with paint?

When the filled area is smooth to your satisfaction, apply a primer to the entire surface to prepare it for painting . Priming the entire surface will help the filled area blend in perfectly when you apply paint. If you do not prime, the patched area may absorb paint at a different rate then the surrounding area.

What to do if wood filler is not flush with wood?

If the wood filler is not flush with the surrounding wood, repeat the earlier steps. Lee Wallender.

How to get paint off of wood?

With a paint scraper or five-in-one tool, scrape away loose edges of the painted area. Stop when it becomes too difficult to pry away the paint. Also, take care not to gouge or damage the wood with the sharp edges of the scraper.

How long does it take for wood filler to dry?

Allow Wood Filler to Dry. Allow the wood filler to completely dry, as directed by the manufacturer's instructions. This normally takes 45 minutes to one hour, but you may wish to give it at least 2 hours. If you try to sand before it has thoroughly dried, the filler will slough off when you sand. Water-based wood filler will dry faster ...

Can you strip paint off of wood?

If you're extremely motivated, you can strip off every square inch of paint right down to bare wood, But it's easier and more logical to make spot fixes instead of stripping away all of the paint. When peeling or chipping paint is found in a small area, you may be able to simply brush off the peeling paint, then prime the wall and paint over it.