Repairing Guides

how to repair concrete garage apron

by Noelia Schroeder Published 2 years ago Updated 2 years ago
image

How do you repair a concrete garage apron?

  • Use quick-setting cement plus bonding adhesive to repair the large voids from the broken/missing concrete.
  • Fill the crack to a reasonable depth with sand/backer rod and then apply a self-leveling caulking or concrete crack filler.
  • Or, use non-shrink precision grout in the crack.

How to repair garage floor concrete damage near apron?
  1. Use quick-setting cement plus bonding adhesive to repair the large voids from the broken/missing concrete.
  2. Fill the crack to a reasonable depth with sand/backer rod and then apply a self-leveling caulking or concrete crack filler.
Aug 19, 2014

Full Answer

How do you fix an old apron on a driveway?

Driveway Apron Repair. After cleaning your old apron spread the concrete bond to any old concrete surface. Wait til it gets a little tacky and then pour or shovel your new mix on the area. Spread the concrete around with the hand float to level it. Next go over the surface again with the float to smooth out any dips and bumps.

What happened to the concrete apron outside my garage?

The Concrete Apron Outside My Garage is Crumbling!’ Here’s a question from our 08/10/2019 Today’s Homeowner Radio Show. Use Up/Down Arrow keys to increase or decrease volume. Lisa in New Hampshire says, “The concrete apron outside of our garage is crumbling and falling apart.

How do you repair a broken concrete garage floor?

Use quick-setting cement plus bonding adhesive to repair the large voids from the broken/missing concrete. Fill the crack to a reasonable depth with sand/backer rod and then apply a self-leveling caulking or concrete crack filler.

How do you use a concrete apron?

After cleaning your old apron spread the concrete bond to any old concrete surface. Wait til it gets a little tacky and then pour or shovel your new mix on the area. Spread the concrete around with the hand float to level it.

image

How do I fix the edges on my garage floor?

0:127:50How to Fix and Repair Cracked and Chipped Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd they're not doweled together so whenever you drive over it you get a separate movement on eachMoreAnd they're not doweled together so whenever you drive over it you get a separate movement on each pad so they're binding. And that's what causes the edge of edge to fracture like that.

How do you fix concrete garage lips?

1:305:16How To Repair Concrete | Pro Tips For Repairing Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipAny loose debris from the damaged area with a wire brush and broom then you can use a caulk gunMoreAny loose debris from the damaged area with a wire brush and broom then you can use a caulk gun loaded with a masonry crack filler to fill the crack.

How thick should concrete be for garage apron?

Thickness: The concrete in the garage apron should be 4”. Less than this will not give you the required strength and the apron will crumble in no time. Concrete: Concrete with a strength of 4000 psi is most suitable for the garage apron. Use of fiber reinforced concrete is preferable.

How do you finish a concrete apron?

1:277:48Concrete Apron In Front Of Garage (Pouring & Finishing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs we move our way to the left because of the slope of the driveway you'll see that coming up in aMoreAs we move our way to the left because of the slope of the driveway you'll see that coming up in a different angle here in a minute the apron actually starts sloping a little bit more.

What is garage apron?

The concrete garage apron is the concrete slab in front of the garage door. The apron is usually between 2 to 6 feet wide and runs the entire width of the driveway and the garage door.

Can you pour concrete over concrete?

You can put new concrete over old concrete. However, unresolved issues with your old concrete, such as cracks or frost heaves, will carry over to your new concrete if not taken care of. In addition, you must pour it at least 2 inches thick.

How much does a concrete apron cost?

For a poured concrete apron, expect to pay $3 to $10 per square foot, which includes fill sand, steel reinforcement, and concrete delivered by truck (sack-type concrete is not suitable for this project). Professional installation will add another $8 to $12 per square foot.

What is the purpose of a concrete apron?

Concrete aprons can aid in stormwater management as they prevent water from pooling on concrete surfaces. Aprons help to divert rainfall away from your parking lot. Concrete aprons also add aesthetic value to your property by breaking up the scenery and making your parking lot more appealing to look at.

What is apron slab?

What is an apron slab? An apron slab is a smooth impermeable surface constructed around a water point to prevent spilt water soaking into the ground.

What is the purpose of a driveway apron?

Driveway Apron means that portion of a regularly established driveway lying between a property line and any curb, the purpose of which is to provide vehicular access from the street across the curb, parkway and sidewalk to the property fronting thereon or abutting thereto.

How do you finish a driveway apron?

0:5011:21How to pour a Driveway Apron Approach Part 2 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis particular mix it's basically a a5 sack straight sack five sack no additives like no fly ashMoreThis particular mix it's basically a a5 sack straight sack five sack no additives like no fly ash just cement cement rock and sand.

What is a driveway apron?

What is a driveway apron? It's the area where your residential driveway meets the street pavement. You can transform that plain patch of tarmac by tearing up the section above the curb and replacing it with materials that look like they were taken from the streets of Brussels itself.

How do I put threshold on concrete floor?

0:002:07Flat Headed Tapcon for Fastening a Threshold to Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe hole should be drilled 1/2 inch deeper in the base materials in the anchor will penetrate. TheMoreThe hole should be drilled 1/2 inch deeper in the base materials in the anchor will penetrate. The deeper the embedment of the anchor in the base material.

How do I keep leaves from blowing in my garage?

No matter where your garage is located, you will still find leaves blowing in. An easy way to combat this wind situation is to create positive pressure within your garage. Installing a fan or placing a fan and pointing it towards the door can disrupt the airflow enough to keep most debris out.

How do I level my garage floor entrance?

Garage Floor Leveling Compound vs. Slab JackingStep 1: Clean the low area thoroughly. ... Step 2: Use a straightedge to gauge the depth of any concrete depression. ... Step 3: Use self-leveling concrete filler consisting of latex, epoxy, or some combination thereof. ... Step 4: Allow the garage floor leveling compound to cure.More items...•

How do you cut a concrete garage floor?

Use a standard circular saw, equipped with a corundum or diamond blade, for small tasks. For slabs, it's best to cut through the top inch, then use a sledgehammer to break off the rest. The jagged edge left below the cutting line provides a good rough edge for the new concrete to bond to.

1. Concrete Patches

If the damage is not too deep, you can use concrete patches to repair it quickly and cost-effectively. Simply mix the material with water and putty knives until you have a thick paste, which you can apply with a trowel or an old paintbrush. Make sure to press it down firmly to adhere to the surface, and then allow it to dry.

2. Epoxy Resin

If the damage is more serious, you may need to use epoxy resin. This is a more intensive repair process, but it will give you a longer-lasting result. First, clean the area with acetone, which will remove any dirt and oils that could hinder the adhesive. Then, mix up resin in an applicator bottle until it becomes like syrup.

3. Surface Coatings

If either of these two options do not work for you, you can also consider applying a coating over the top of your garage floor. To begin, clean out cracks with a wire brush and vacuum up the dust. Next, mix a quart of concrete resurfacer with water according to package directions, then pour it into a paint roller tray.

Why do you tie an apron to a garage slab?

He ties the apron to the garage slab with rebar to prevent it from separating, which could create a large and uneven gap. It’s a given that a bunch of you masons out there are going to insist that you should never join exterior concrete to an interior slab.

How long does Glenn wait to seal the apron?

Glenn waits to seal the apron until after the expansion joints are cut. That way he can saturate down in the crevice where water can accumulate. If he can’t get to the apron right away after it sets up, he seals it immediately after pouring and reseals the in the crevice after the joints are cut.

Does Gorilla Tape work?

Gorilla Tape Works Great. Glenn has found that Gorilla Tape works best because it’s tough and adheres better to a dirty surface than other tapes. Also, don’t forget to warn the homeowners and neighbors to keep an eye on their kids and pets.

Does an expansion joint prevent cracking?

In this application, an expansion joint is not going to prevent cracking in the traditional sense. Instead, it creates a gap between the apron and the garage slab so if the outside of the apron does move up a bit, the top edges of slap and apron don’t crack from being forced into one another. 6 / 11.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9