
- Go to the frameside of your fence where the post is visible. Simply dig down straight along the back of your broken fence post. ...
- Then simply drop your concrete repair spur down the whole flush against the fence post. Prop your fence up straight to the position you want to achieve. ...
- Now use 1 bag of corse postmix, pour into the hole and add water. ...
- Tamper the ground firmly ensuring the post feels solid and let the concrete set. Normally hard within 10-15 minutes with most brands. ...
How do you remove a broken wood fence post?
- Dig a trench next to the footing and tip the post out.
- Wrap a chain around the post and use a high lift jack to pull the post out.
- Screw lag bolts through a chain into the broken off fence post and then use a vehicle winch/come along/high lift jack to pull the post out.
How to reinforce a fence post?
Using 3 1/2 inch galvanized nails, you’ll ensure lasting durability:
- First, measure the rail and cut a sister rail of pressure-treated of lumber the same size as the original rail.
- Cut off the damaged part of the rail.
- Position the sister rail beneath the old rail and add clamps every 12 inches along the length of the board.
- Toenail the sister rail to the posts on both sides, and underneath.
How to replace a broken wooden fence post?
To replace a wooden fence post, start by disengaging the post fro the fence rails. Pull the post out of the ground, using a 2 X 4 to lever it if necessary. Dig out the concrete footer, if there is one, then set a new pressure treated post and backfill the hole with crushed gravel or concrete.
How to straighten a fence post?
Straightening a Leaning Post Set in the Soil
- Remove Any Stress or Weight on the Affected Posts. You need access to the fence post without any interference. ...
- Examine the Post. Check the post carefully. ...
- Remove Soil from the Side of the Post Away from the Lean. ...
- Use a Level to Ensure the Post is Straight Up and Down. ...
- Replace the Soil at the Post Base. ...
- Don’t Get in a Hurry. ...
- Reinstall the Fencing. ...

Can you repair a cracked concrete post?
You can either fix a concrete spur post to a single broken post or attach to every post for an even look and to prevent future failing. Concrete repair spurs are available at Solent Fencing and are a cost effective way of strengthening a fence to ensure that it lasts longer or repairing an already broken fence.
Can you fix to concrete fence posts?
It is possible to drill into a concrete fence post. With the proper tools and approach, it's easier than you might think. There are some necessary things to take into consideration before you start drilling, such as the type of drills you will need and the specifications of your posts.
How much does it cost to repair a concrete post?
Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.
How do you repair a concrete fence Spur?
Dig out a hole 600mm deep against the rotted post. Place the concrete repair spur in the hole and mark up the bolt holes. Remove the spur and drill the holes through the wooden post. Replace the concrete spur into the hole and bolt it to the wooden post.
How long do concrete fence posts last?
around 25 yearsConcrete is as sturdy and durable a building material as you'll find. With just a minimal level of maintenance, concrete fence posts can last for around 25 years. However, they are not immune to wear and tear. Over time, wind and rain can cause concrete posts to chip and crack.
How do you replace a concrete post?
0:515:33How to Replace a Rotted Fence Post | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy cutting the post above. And below the rail we're gonna release the rail. So they can swing outMoreBy cutting the post above. And below the rail we're gonna release the rail. So they can swing out and then we can work on the post. Now we'll just bang out the pieces of the post with a hammer.
Should I use concrete or cement for fence posts?
Concrete provides a strong foundation for wooden fence posts, but can rot them more quickly. Setting them in dirt, with or without gravel or crushed rock depending on your soil type, can help the posts last longer before going rotten. You can also use metal fence post anchors to prolong their life.
Can I use mortar for fence posts?
You can definitely set a fence post using mortar. Although the post won't be as strong as if you used concrete, it'll be stronger than just dirt or sand.
What is the best cement for fence posts?
Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.
What is a concrete repair spur?
Concrete Repair Spurs are used to repair broken or rotted fence posts or they can also be used for bolting posts or timber frame work above the ground.
Do concrete repair Spurs work?
Normally a damaged fence has to be replaced in its entirety, but not anymore. The Challenge Fencing Concrete Repair Spurs can fix the problem for years to come and with an ergonomically designed back weather top, your steel reinforced spur won't lose any durability from rainy weather.
Can you put new fence posts in old holes?
Its a spike shaped like 2 sides of a square if you can picture that, with a section on top for a new post to bolt into. The theory is that you bang it into the old hole then fit new post to it. You need a rubber bung thingy to allow you to bang it in without damaging it.
How do you attach a wooden post to a concrete post?
2:344:29Attach Wood to a Concrete Post (SUPER STRONG HOLD!) - YouTubeYouTubeStart of suggested clipEnd of suggested clipLevel it clamp it in position. And then pilot hole through the wooden. Post. Just with your masonry.MoreLevel it clamp it in position. And then pilot hole through the wooden. Post. Just with your masonry. Bit to mark the holes on the concrete place with your drill.
How do you anchor a fence post to concrete?
0:202:12Wedge Anchors For Fence Post to Concrete - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst the wedge anchor is inserted through the fixture. And into the concrete. The nut is thenMoreFirst the wedge anchor is inserted through the fixture. And into the concrete. The nut is then turned clockwise pulling the anchor up. And moving the clip down wedging.
Can you reuse a concrete post footing?
Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
How do you replace a fence post without removing concrete?
The best way to replace a fence post without removing the concrete footing is by prying it out. You can do this with a long lever and fulcrum or a car jack. In either case, nail some wood to the post first to pry against and then get to work. Pry until the post releases from the concrete and comes all the way out.
Concrete Crack Repair
The technique for patching cracks will depend on the size of the crack.
Remove Paint From Concrete
Concrete is porous and absorbs paint well. Here are some recommendations for removing spilled paint.
How to repair cracks in a car?
The injection process is the most common repair for cracks. Using a caulk gun, inject an epoxy or urethane resin into the crack – working from inside to outside and top to bottom.
What to do if your job gets too big?
If the job gets too big, it’s best to find a professional to help out. Small repairs are manageable (if you have the necessary skills). When in doubt, find help. It’s better to pay now for a professional than pay the expert for the original repair and fixing your mistakes.
Can water damage precast concrete?
Water can cause substantial damage, especially if you live in an area that freezes, so water intrusion should be dealt with quickly. Precast concrete panels showing water damage often tell you that the wall was not built or sealed right. Very rarely, improperly poured concrete could be the source of the water intrusion problem.
Can concrete footings move?
Rarely, concrete footings can crack or move. Your best option, in this case, is to replace the whole footing and support post. Remove the concrete panels – you will probably need to hire a forklift or crane for this job, dig out the footing, and replace it with new concrete.
Can concrete be poured on water?
Very rarely, improperly poured concrete could be the source of the water intrusion problem. Incorrect concrete vibrated into place after pouring could create voids that water can seep through. Cold joints, where new concrete is poured on old concrete, are a huge problem too. Both shouldn’t be an issue when using precast concrete.
Do prefab fences need to be repaired?
Prefab concrete fences shouldn’t need frequent repairs – that’s one of their significant benefits. However, if your wall does get damaged, it’s best to tackle the repair job ASAP. Getting it done quicker, keeps the repair job small and manageable.
Does urethane work better on cracks?
Epoxy only works well for clean cracks, while urethane will work better on older cracks that have been repaired before or are dirty.
