how to repair cracked plastic car bumper

^{Cracked Bumper Repair}

1. Remove the Bumper. Here's what the bumper damage looks like before the repair. ...
2. Sanding. Next, use a dremel tool to carve a V shaped groove in the back of the bumper along the crack. ...
3. Apply Epoxy. A clamp was applied at the top of the crack to prevent it from separating. JB Weld Plastic bonder was applied along the crack.
4. Fill in the Crack. Once the epoxy has dried overnight and cured, the tape and supporting clamps can be removed. ...
5. Prime and Paint the Bumper. The sanded area of the bumper was then primed with two light coats of primer. ...
6. Reinstall the Bumper. Once the paint has cured and can be handled, the bumper can then be reinstalled on the vehicle. ...

How much does a cracked bumper cost to fix?

We recommend that you avoid over-speeding and take it to professionals for repair as soon as you notice a serious crack in your bumper. Although it might cost you between $300 and $1500, depending on the vehicle, but it is better to repair it while you can than cause greater havoc as a result of your negligence.

How to repair your scratched plastic bumper?

• 80 and 40-grit sandpaper for stripping.
• 500 and 600-grit sandpaper for finishing.
• Rubbing alcohol, and abrasive cleaner or stripper.
• Utility blades.
• Black Body filler (for deep scratches.)
• High-quality black bumper polish.
• Polishing rags (microfiber works best.)

How much to repair cracked rear bumper?

• Dented bumper, deep paint scratches, cracked windshield, suspension damage and rear-end damage are some of the common auto body damages you may face.
• The repair cost of a car's damaged body parts ranges between $50 to $1,500 and more. ...
• You will require collision coverage to repair dented bumper, suspension damage and rear-end damage. ...

More items...

How to fix a rusted chrome bumper?

Method 4 Method 4 of 4: Repairing and Protecting Chrome after Rust Removal

1. Buff and dry the surface. If the rust only showed through the chrome in pinpricks, drying the surface with a towel after cleaning may be enough to keep up ...
2. Protect the metal using polish or wax. Apply a wax or polish to the chrome to protect it from any further damage.
3. Apply silver paint. ...
4. Get the object re-chromed. ...

Can a cracked plastic bumper be repaired?

Nearly every cracked plastic bumper can be repaired, and usually for less than half the cost of a new bumper. While almost every cracked bumper can be repaired, it isn't always practical. A plastic bumper crack repair job requires a special plastic welding technique plus the application of structural adhesives.

Can you repair a plastic front bumper?

Fortunately for your bruised bumper, plastic repair and refinishing materials are widely available and reasonably simple to use. Fixing damaged plastic bumpers involves grinding, sanding, sculpting, and painting, but it's worth the effort for repairs that would cost less than your deductible.

What filler can I use on a plastic bumper?

Choose a flexible filler such as 3M™ EZ Sand Multi-Purpose Repair Material.

How do you fix a cracked bumper cover?

0:528:11Bumper DIY Crack Repair. Fix all types! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is what we're gonna be using to repair to crack. This is a two-part epoxy. Now it's the gorillaMoreThis is what we're gonna be using to repair to crack. This is a two-part epoxy. Now it's the gorilla mech but it can be any type of two-part epoxy. And this is just regular bandage.

Can I use body filler on plastic bumper?

Body filler and glaze is not meant to flex the way that plastic does, therefore the material would crack. Plastic repair materials should be used when performing repairs on bumper covers. These materials or adhesives, are two-part epoxies, urethanes, or acrylics.

How can I fix my bumper myself?

2:5516:22DIY Bumper Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow we have a little bit of a high spot still so we're going to use some heat and push it down weMoreNow we have a little bit of a high spot still so we're going to use some heat and push it down we don't want to grind away all the plastic. We just want to make sure we have a level surface.

What is the best plastic body filler?

We have listed the top three rated car body fillers below;3M Bondo 261 Lightweight Car Body Filler.Permatex 25909 Liquid Metal Filler.Evercoat 156 Lightweight Car Body Filler.

What are bumper fillers?

A flexible easy to use filler that's been specially formulated to repairs scratches and scuffs in most plastic and urethane bumpers and trim pieces. The pre-measured packets are easy to mix and the filler dries fast and can be easily sanded and shaped to the exact bumper contour.

Can you use fiberglass to repair plastic bumper?

A plastic bumper repair is an easy weekend body repair job to help beautify your car by getting rid of deep scratches and cracks. One option for this type of repair job is to use a fiberglass body repair compound such as Bond-O.

Can you Gorilla Glue a car bumper?

While a popular house product, people may ask, “Can Gorilla Glue be used on cars? any of their products are great automotive glues.

Can I use JB Weld to fix my bumper?

1:046:47How To Repair A Torn Bumper Cover, Review JB Weld Plastic BonderYouTubeStart of suggested clipEnd of suggested clipThis is a material that I use the jb weld plastic Bhandar. And if you take a look at. It. There youMoreThis is a material that I use the jb weld plastic Bhandar. And if you take a look at. It. There you go so it's body panel adhesive. So this is the really really good stuff for plastic.

Is it cheaper to repair or replace a bumper?

Bumper repair can be performed in-shop and is often cheaper than bumper replacement. Bumper repair normally costs between $100 and $1,000.

Can you glue a plastic car bumper?

1:295:39How to Fix Your Bumper - The Easy Way - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you have the alignment all figured out. And you're confident that your seam is going to beMoreOnce you have the alignment all figured out. And you're confident that your seam is going to be consistent. You're ready to prep the bumper with your painters.

How do you weld a plastic bumper?

3:356:56Bumper Repair with Hot Air Plastic Welder - YouTubeYouTubeStart of suggested clipEnd of suggested clipHeat the tip of the rod and the base material with the welder until the rod melts together with theMoreHeat the tip of the rod and the base material with the welder until the rod melts together with the base material. Apply downward pressure on the rod as it is melting the downward.

What to do if your bumper is cut?

If the bumper is cut or torn through completely, make sure to scrub the inner and outer surfaces. After rinsing and letting the surface dry, wipe the area with prep solvent, moving in only one direction. Ask Question.

How to repair a bumper with a 400 grit paper?

Once the primer has hardened, dry sand the repaired areas with 400-grit paper to level it and remove any imperfections. Before spraying the bumper with basecoat, wetsand it and gently wipe the area with a tack rag to remove dust, then spray according to the manufacturer's instructions.

How to repair a tear in the back of a fascia?

If the cut or tear is large, you might have to align and then hold the edges of the repair with masking tape on the front of the fascia. Use self-stick fiberglass-repair tape to add structure to the cut or tear.

Can you repair a bruised bumper?

Fortunately for your bruised bumper, plastic repair and refinishing materials are widely available and reasonably simple to use. Fixing damaged plastic bumpers involves grinding, sanding, sculpting, and painting, but it's worth the effort for repairs that would cost less than your deductible. Ask Question.

How to repair a plastic bumper?

The prep work is similar to the welding method. The students began by grinding off the paint and frayed plastic pieces from the repair area and then cut a V-shaped groove in the tear in the bumper. Next, the students "pinged" the bumper by drilling a series of holes on either side of the crack at regular intervals. These holes act like rebar in cement, adding yet another place for the filler to grab onto.

What is the best way to repair a crack in a car?

One repair method is plastic welding. Using a tool similar to a soldering iron and plastic filler rod, you can fill holes or fix cracks like this. Plastic welding machines are available at auto body supply stores or from The Eastwood Company.

What is the filler for TPO bumpers?

The filler they used is 3M Automix 5895, a two-part flexible epoxy adhesive designed to repair TPO plastics. TPO stands for Thermo Plastic Olefin and is what many bumpers are made of. The filler comes in two tubes. Squeeze out an equal amount of material from each tube and mix together thoroughly but quickly. It dries to the touch in only five minutes.

How to fix a crack in a plastic welder?

Clean the repair area with a plastic solvent and hold the plastic welder to the edges of the crack. When the plastic begins to soften and melt, add some filler rod and melt it into the crack, spreading the excess material around with the flat part of the welder. See all 17 photos.

How many grit for a bumper repair?

Finish sanding the repair with 150- grit. The bumper is now ready for primer.

What is plastic repair?

Plastic repair, whether you're using a two-part filler material or plastic welding method, is meant to go on thick and is sanded down to match the contours of the panel. Don't worry if you think your repair looks sloppy; it's supposed to.

When did chrome bumpers come out?

Chrome bumpers made a quick exit from the automotive scene in the late 1980s. In their place are elaborate but flimsy plastic covers hiding stamped steel impact beams—with a swath of Styrofoam sandwiched in between.