Fixing a Dripping Delta Single Handle Kitchen Faucet
- SHUT OFF THE COLD AND HOT WATER VALVES UNDER THE SINK. ...
- REMOVE THE BUTTON AND SCREW THAT HOLDS THE HANDLE IN PLACE. ...
- REMOVE THE CAP. After removing the handle, you can proceed to remove the cap. ...
- USE THE WRENCH TO REMOVE THE CARTRIDGE RETAINING RING. An adjustable wrench is the perfect tool to complete this step. ...
- REMOVE THE OLD CARTRIDGE AND INSTALL THE NEW ONE. The faucet’s cartridge is held in place by the retaining ring. ...
- RE-INSTALL THE CARTRIDGE RETAINING RING. With the new faucet cartridge in place, you can start re-assembling the faucet. Start by re-installing the cartridge retaining ring.
How to rebuild a Delta single handle faucet?
- Look to see whether the spout is dripping—this is the most common cause of a leak. ...
- Shut off the hot and cold water supply valves, which are usually silver knobs under the sink. Turn on the faucet to drain any water in the lines. ...
- After removing the screw cover on the faucet handle, use a screwdriver to lift off the actual handle. ...
How to replace a kitchen faucet with a single handle?
- Adjustable Wrench
- Flashlight
- Cloth
- Heavy Duty Sponge
- Plumber’s Putty
- Bucket
- Faucet Kit of your choosing
How to repair a Delta kitchen faucet?
bathroom and laundry room and around water heaters and outdoor faucets. We instruct them to tell the adults in the house what they find so they can fix those leaks and start saving money. Unfortunately, our Fix a Leak Week visits have been on hold for the ...
How to remove a single hole Delta kitchen faucet?
- Disconnect Supply Lines & Veggie Sprayer (1:22)
- Unscrew Mounting Nuts (2:40)
- Remove Faucet & Veggie Sprayer (3:10)
How do I disassemble a Delta single handle kitchen faucet?
1:078:56Delta Kitchen Faucet Leak Repair (Single Handle) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to removeMoreThis is a double check to make sure that your water is off use a 1 8 inch hex head wrench to remove the set screw in the handle. Put the set screw in a parts pole to ensure that you will not lose.
How do you fix a Delta single handle faucet?
0:344:06How To Rebuild A Delta Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool toMoreOnce we have the handle took off we're going to need to open our rebuild kit as it has the tool to loosen that nut on the top of the faucet. The part numbers gonna be at our b-36.
How do you take apart a Delta faucet?
2:4710:00Delta Faucet Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext step we're going to be removing the cap assembly. We'll do that by using our adjustable wrenchMoreNext step we're going to be removing the cap assembly. We'll do that by using our adjustable wrench again this is a smooth draw wrench as we're not we don't want to scar the finish of the product.
How do you change a Delta single handle cartridge?
0:2712:08Delta Single Handle Faucet Cartridge Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet. This particular one is from Delta. All the other manufacturers have this style as well it'sMoreSet. This particular one is from Delta. All the other manufacturers have this style as well it's called a single lever faucet. And sometimes they're on the side like this on across the deck.
How do you take apart a Delta kitchen faucet head?
3:338:29Delta pull down single handle faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipPick it up put about your screw and all your other parts and then you're able to pull the plungerMorePick it up put about your screw and all your other parts and then you're able to pull the plunger assembly. Out. So you just I just got a screw behind behind this little head.
How do you fix a Delta kitchen faucet with pull out?
0:004:06Kitchen faucet repair- Delta Pullout spray #1 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little seal here and there are springs and seats inside of here that help it feel. So ifMoreThere's a little seal here and there are springs and seats inside of here that help it feel. So if your faucet is dripping over here then you have a seal problem against your ball.
How do you remove a Delta faucet stem?
0:086:00How to change the stems, seats and springs in a Delta Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's a Allen nut that I have to loosen there once I get that loosened up the handle shouldMoreAnd there's a Allen nut that I have to loosen there once I get that loosened up the handle should pull straight up sometimes that's a little difficult. So you have to wiggle it back and forth.
How do I know what model Delta Faucet I have?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do I fix a single handle kitchen faucet?
0:423:11How to Repair a Leaky Single Handle Ball Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You willMoreFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You will need to remove the single lever handle. This may require using an allen wrench to loosen the hammer.
How do you remove a Delta cartridge?
5:156:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhich is secured in place with the bonnet nut remove the nut with a strap wrench or a pair ofMoreWhich is secured in place with the bonnet nut remove the nut with a strap wrench or a pair of channellock. Pliers. Reach in and slide out the cartridge by wiggling it back and forth while pulling.
How do I know if my faucet cartridge is bad?
Signs that a cartridge faucet needs repair are water dripping from the spout, difficulty in adjusting the water temperature, hot water entering cold water outlets like toilet supply lines and inadequately heated water at some faucets.
How do you take apart a single handle bathroom faucet?
1:204:00How to Replace the Seats & Springs in a Single Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse the needle nose pliers to unscrew the adjusting ring. Place a cloth over top and use the channelMoreUse the needle nose pliers to unscrew the adjusting ring. Place a cloth over top and use the channel lock pliers to unscrew the cap. Now pull out the ball the cam and packing.
How do you take apart a delta bathroom faucet?
0:422:11How to fix a leaky dripping Delta faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipTurn off the water from under the sink. And then take off the nut that holds in the valve. To makeMoreTurn off the water from under the sink. And then take off the nut that holds in the valve. To make things easier make sure that when you take the nut off that.
How do I know what model Delta Faucet I have?
The model number on the package by the UPC code or may be found on a supply line tag. We also have an online tool to help identify the model. The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box.
How do you change a spring and seat on a Delta faucet?
1:396:00How to change the stems, seats and springs in a Delta Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the spring underneath it Anna you can tell you push down on it and you'll have a little bit ofMoreWith the spring underneath it Anna you can tell you push down on it and you'll have a little bit of spring to it. And you wanna make sure that it goes right in the hole.
How Do You Fix a Dripping Delta Kitchen Faucet?
Delta faucets are some of the best and long-lasting faucets in the market. That notwithstanding, they will leak from time especially in areas with hard water but debris can also play part in it.
1. Turn off Water to the Faucet
You cannot repair the faucet with water still flowing to it. Duck under the kitchen sink to turn off water to the faucet.
2. Remove the Faucet Handle and Spout
The faucet handle is connected to the valve using a hex screw. Turn the handle to the open position to reveal the screw underneath it. Remove the hex screw using a 1/8-inch hex wrench.
3. Remove the Cam, Ball Assembly, O-rings, Seats and Springs
Use a flathead screwdriver to pry off the Cam assembly. This is the black rubber piece at the top of the valve.
4. Install the New Faucet Parts
Start with the O-rings. Slide in both the upper and bottom O-rings into their grooves (start with the bottom one). Do not use any tool to force them down the valve to avoid pinching them.
5. Install the Spout and Handle
Clean the inside of the faucet spout to remove all mineral deposits and debris.
6. Test the Faucet
Turn on water at the shut off valves and open the faucet. Check for leaks when the faucet is running and when the faucet is turned off. If you did everything right as outlined in this post, you will notice that the leak will have disappeared.
Introduction
Disassemble your Delta Single Handle Kitchen Faucet Ball and seat assembly to check for cracked gaskets and leakage, or to replace the taps.
Step 3
Using channel lock pliers or pipe wrench remove locking cap to expose valve.
Step 5
Remove seat assembly using an allen wrench or phillip head screwdriver
Step 6
Replace seat assembly using allen wrench or phillips which keeps you from loosing the spring.
Step 7 Repace ball and cam assembly
Install ball assembly making sure tab in faucet assembly is inserted in ball housing slot
Step 8 Replace locking cap assembly
Hand tighten plus a little turn with channel lock pliers. Do not over tighten or scratch finish.
Techniques for solving a tough faucet problem
Repair a drippy ball-type faucet using these pro tricks to deal with stubborn screws. You may have to replace the handle, but not the entire faucet.
Kitchen Faucet Repair: Loosen a stuck screw on a single-handle faucet
If the Allen screw is stuck, or if you strip it so it won’t come out, remove the cap with the handle still in place. You can’t grab the flattened edges with the handle in place. Instead, for this kitchen faucet repair, cushion the jaws of pliers and grip the round edge below.
How to Remove Faucet Handle
If you can’t loosen the Allen screw on the handle of a ball-type faucet, don’t let that 15¢ screw force you into a $100 faucet replacement… just yet! Normally you have to remove the handle to get the worn rubber seats that cause the drip (Figure A). First try spraying the screw with penetrating oil every day for a week.
Required Tools for this kitchen faucet repair Project
Have the necessary tools for this DIY kitchen faucet repair project lined up before you start—you’ll save time and frustration.
Required Materials for this kitchen faucet repair Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
