how to repair dent in car hood

by Cicero Hyatt Published 3 years ago Updated 2 years ago

How to Repair a Dent in Your Car Hood

Step One – Tap out the Dent. Park your car on a flat, level surface to prevent it from rolling or moving while the repair is being carried out.
Step Two – Sanding. Put on your dust mask to help protect against dangerous paint particles while sanding. ...
Step Three – Add Filler. ...
Step Four – Rubbing Filler. ...

Part of a video titled Car Hood Dent Fixed With Paintless Dent Removal - YouTube

1:00

2:04

So what we do is we remove this dent we push it up. And then this spot this high spot here we haveMoreSo what we do is we remove this dent we push it up. And then this spot this high spot here we have to use our special tools and our special hammers that will push this down from the top.

Full Answer

How to get a dent out of a car hood?

How do I get a dent out of my hood?

Remove a dent with a hair dryer. Locate and measure the dent.
Use a plunger. A plunger is a magic tool.
Fix a dented bumper with boiling water. This method works for dents on plastic bumpers as well as on parts of your car made of plastic.
Use a vacuum cleaner and a bucket.

How to fix a dented car hood?

How to Repair a Dent in Your Car Hood

Step One – Tap out the Dent. Park your car on a flat, level surface to prevent it from rolling or moving while the repair is being carried out.
Step Two – Sanding. Put on your dust mask to help protect against dangerous paint particles while sanding. ...
Step Three – Add Filler. ...
Step Four – Rubbing Filler. ...

How much does it cost to repair a Hood Dent?

Paintless dent repair can cost as little as $50-100 for light dents, $75-300 for medium, and up to $300-500 for larger dents. The cost will depend on several factors, such as the dent size, dent location, and the extent of the damage.

How to repair a dent on your car?

Project step-by-step (6)

Prep and Clean Before Filling. Wash and dry your car.
Remove the Paint. Start by removing the paint inside and around the dent with 24-grit paper. ...
Mix the Filler. Spread the filler down the mixing board in an S-shaped curve. ...
Apply a “Tight” First Coat. Scoop up some filler and press it hard into the rough metal. ...

How much does it cost to fix a dent on the hood?

You can typically expect small dent repairs to cost as low as $60 to $125while repairing large dents could cost $100 to $500 or more. The cost to repair your dent will depend on several different factors, like the size and the hood's material (which would determine the process to fix it) and how much time it takes.

How do you get a small dent out of a car hood?

Luckily, you can fix small dents in your car hood using these household items:Vacuum cleaner. Poke a hole in the bottom of a container or bucket and place it over the dent. ... Plunger. Push the plunger against the dent and pull the plunger back until the dent pops out.Hairdryer.

Can a bent car hood be fixed?

Generally, it will cost $50 to $250 to fix a bent car hood, but the price can vary depending on the make and model of your car and how severe the damage is. If the damage is beyond repair, it will cost anywhere from a few hundred to a few thousand dollars to replace the hood.

How can I fix a dent on the top of my car?

Here are a few different ways you can try to fix your car roof dents:Use hot water or a hairdryer. Apply the heat evenly to the dent and then push upward with your hand.Use a rubber mallet to gently tap the dent out of place from inside your car.Use a toilet plunger (for larger dents).

Can you take dents out of a hood?

To do this, remove your hood and lay it upside down on a blanket. Hammer around the edges until the dent pops out. You can also try the plunger method. Place your household plunger over the dent and pull until it pops back into place.

Do suction cup dent pullers work?

They can improve the appearance of dents but probably won't create a perfect finish. But these tools will not work on deep, angular dents or damage along the edges of bodywork. Dents in areas of thick metal will also be very difficult to remove at home.

Should I replace my dented hood?

If your hood sustained heavy damage due to a preexisting problem, it's an all-around better idea to opt for a replacement. Rust, too, is a deal-breaker for most repair service providers. You may find hood replacement to be a viable alternative to dent removal, minor repair and complete overhauls, in most cases.

How much does it cost to fix a crumpled hood?

If your car hood is too damaged and needs to be replaced entirely, the cost of a professional replacement can range anywhere from $70 to $500, depending on the kind of hood you have (fiberglass, carbon fiber, or steel).

How do you repair an aluminum hood?

8:3414:23Repairing Aluminum Body Panels With Collision Damage - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow here's the other trick that everyone has to realize. One is don't grab these right away becauseMoreNow here's the other trick that everyone has to realize. One is don't grab these right away because you just heat up the panel it's aluminum aluminum travels on to the stainless steel pins.

How do you pop out a dent?

0:413:15How to Remove Car Dents Fast - YouTubeYouTubeStart of suggested clipEnd of suggested clipSome water on your stove in a big pan. And pour it all over the dent area then put the suction cupMoreSome water on your stove in a big pan. And pour it all over the dent area then put the suction cup on it'll all batter. Plus the heat off and makes the metal. Get more flexible.

How do you remove a dent without damaging paint?

1:513:20How to Remove Dents from a Car Without Damaging the PaintYouTubeStart of suggested clipEnd of suggested clipSpray denatured alcohol on the glue. And use the plastic non-marring scraper to remove it. As youMoreSpray denatured alcohol on the glue. And use the plastic non-marring scraper to remove it. As you can see the dent is partially removed will move to a smaller button and repeat the process applying.

How do you get dents out of metal?

Boiling Water: Simply pouring boiling water over the area can be enough to pop a small dent out of your car in many cases. That's because the built-up stress in a dent is relieved when you apply heat and the metal or aluminum can relax enough to pop back out to its original shape.

Does hot water really fix dents?

Use boiling water It can also be used to potentially remove unwanted depressions in your vehicle, that is, as long as you have a plastic bumper and are successfully able to access the dent from the backside.

Is it worth fixing small dent on car?

Unless the dent or scrape is very minor (and therefore very cheap to fix), older and less-valuable vehicles probably won't gain much value from a repair. You're often better off just keeping your money and living with the scrape and the knowledge that your car is a little less perfect than it was yesterday.

How do you get a dent out of a car metal?

How much does it cost to fix a hood of a car?

How to pop a dent out of a hood?

Lightly pound the dent out with a mallet: Remove the hood, lay it upside down on a blanket, and then lightly pound against the periphery of the dent working your way toward the center until it pops back into place. Pop the dent with a plunger : Some simple dents can be popped out using a household plunger.

What happens if you dent your car hood?

You should take care of this problem as soon as you possibly can. A dent on your hood can cause pooling when it rains, or even lead to rust and other issues.

How much does it cost to repair a dented hood?

The cost of a professional repair for dented car hoods can range quite a bit. It's typically between $150 to $500, depending on the extent of the damage, and particularly its size. It will also depend on whether the dent can be repaired. If your repair requires re-paint, or if the dent is on a body line and would require a new hood.

Why does my car hood get dented?

There are several ways a car hood can get dented or damaged: items fall inside your garage, a tree branch hits your hood, or a friend sits on your hood. Dents can even be caused by cats or other animals walking across your hood. Preventing Damage to Your Car's Hood. Better late than never!

What is the hood of a car?

Your vehicle hood is the centerpiece of any car and is what usually attracts they more than any other painted car part. Car hoods are more vulnerable to damage than many other parts of your vehicle. The hood lays horizontally and has a large surface area, sometimes larger than the roof.

Is it worth it to repair a hood?

If you're facing a serious hood repair, it may be worth it to claim the damage on your auto insurance. If your deductible is significantly lower than the cost of the repair, consider whether it will be worth it to potentially have an increase in your auto insurance rates to make the repair.

Can you rest on your hood?

Do not allow anything to rest on your hood: That includes people, animals, and items. Avoid resting things like a coffee cup, groceries, or books on your hood on a regular basis, and never store items on top of your car, even if it's stored in a garage.

How much does it cost to fix a hood dent?

Hood dent repair can range anywhere between $150 and $500. Sometimes, it is impossible to repair the dent. If the dent is on a body-line, you may need a new hood altogether. All but the most minor dents need re-paint. But these minor dents that do not need re-paint are inexpensive to fix.

What happens if you damage your car's hood?

When your hood is whole and undamaged, water runs off it onto the ground and never settles on the surface of your car. Dents and damage on your car’s hood can lead to pooling when it rains, which in turn leads to rust and other issues.

Why is the hood of a car important?

Logic follows that the hood will receive the brunt of any debris or any collision damage. Steel hoods are cheaper and slightly more durable than aluminum hoods, but all hoods are susceptible to dents.

Can you claim a hood dent on your insurance?

If your hood dents occurred in a collision and you’re facing serious hood dent repair, you could claim the repairs on your auto insurance. If your deductible is lower than the cost of the repair, claiming the repairs might be your best option. But in that case, you take the risk that your auto insurance premiums will go up.

Is a steel hood more durable than an aluminum hood?

Steel hoods are cheaper and slightly more durable than aluminum hoods, but all hoods are susceptible to dents. Car manufacturers also design car hoods to crumple in the event of an accident. Even in a minor collision, you might experience crumpling and dents on your car hood. Any number of things can put you in need of hood dent repair.

Can you store items on the hood of a car?

Never store items on the hood of your car, even inside your garage. Use a protective cover. Many dings and dents are the result of flying rocks on the freeway. These protective covers will prevent debris from damaging your hood. Park inside your garage.

Is it too late to take precautions on a car hood?

Even if you already have dents or other body damage to the hood of your car, it’s never too late to take precautions against further damage. Here are a few tips to preventing damage to your car’s hood, especially if you already have collision damage on your car’s hood. Do not allow anything to rest on your hood.

You Can Do It Yourself

However, if you're willing to give it a try, in many cases you can fix your car's dents quite effectively yourself using some not very expensive dent-removal tools.

Buy a Dent-Repair Kit

If it looks as though a DIY repair may be possible, we suggest purchasing a dent-removal kit. These kits typically use a bridge-type tool (as shown above) with legs that will straddle the dent. These tools have a hole in the middle of the bridge section, along with different sizes of pulling attachments.

Plastic Pieces Can Be Popped Out

If your dent is in a plastic surface like a front or rear bumper cover and you can get to its inside surface, you can pour boiling water over the area to soften it up, then push the dent out from the inside. If you can’t access the dent from the inside, try using a hair dryer to warm up and expand the outer surface.

Patience Is Required

In all cases, take your time. Removing dents is a multi-step process. Work too fast, pull on the metal too hard or too far, and you'll stretch it the wrong way and it will be unfixable—at least by you. One or more of these methods may work to pull or push out your dent or ding without investing money in a professional repair.