
Fixing An Underground Dog Fence
- Dig up the location where you find the break
- Strip the wire covering away from both ends of the broken wire
- Remove all the dirt and clean the wire
- Twist the ends into a wire shape
- Connect the wires by using an underground wire splicing kit
How to repair invisible dog fence wire?
If by any chance your wire breaks and you need to repair invisible dog fence wire or if you want to extend the area that will be covered by the electric dog fence here’s our Guide on how to do it. If the wire break is underground, you’ll need to dig up the wire first to expose the broken wire, or simply leave it there and run new wire.
What should I do if my Electric Dog Fence is beeping?
If your electric dog fence came with a thin wire, you may want to replace it with a thicker wire. A seven-strand wire with a sturdy coating will last longer and help resist breaks. Finding a wire break can be a bit hard. If your transmitter is beeping, that typically indicates a wire break or faulty transmitter.
What happens if a dog fence wire breaks?
It's pretty simple, If your Dog Fence Wire breaks – your dog escapes. Having a Good Quality wire is the best way to go so that your Electric Dog Fence will not fail when it breaks or get worn out.
Are electric dog fences any good?
Electric dog fences are great if you can’t use a physical fence for any reason. These fences can use a few technologies, but many use a wire to transmit a signal that lets your dog know when it is leaving the fenced area. If your dog has been trained properly, the only reason your pup would be outside the fence is if the wire breaks.

Can you splice dog fence wire?
When splicing the dog fence wire, all you need to do is twist the two exposed ends together, insert them into the gel-filled capsule and close the splice lock. The cylinder of the underground wire splice contains a mixture of silicone and grease, which helps to secure the waterproof connection.
How do you fix a broken fence wire?
3:216:03Fixing Wire Fencing - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can use a pair of fencing pliers. We're just going to bend the wire over the pliers. We're goingMoreYou can use a pair of fencing pliers. We're just going to bend the wire over the pliers. We're going to wrap the tag in around itself back onto itself we want to go three to four drops.
How do you splice electric fence wires?
1:187:01How to splice high tensile fencing wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing we want to see how the wire coming down the fence is under and this tail was over we want toMoreThing we want to see how the wire coming down the fence is under and this tail was over we want to stick our wire or splice wire in from behind.
How do you find a broken dog wire?
4:437:52How to find a wire break in a underground dog or pet fence using ...YouTubeStart of suggested clipEnd of suggested clipYou will orient this so that when you go back and forth about above your wire you'll hear the staticMoreYou will orient this so that when you go back and forth about above your wire you'll hear the static. Kind of increase as you get close to the wire.
How do you replace a section of a wire fence?
3:204:29How to Repair a Chain Link Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know this has been a really easy project it took us about an hour to do if you had a biggerMoreYou know this has been a really easy project it took us about an hour to do if you had a bigger fence it might take a little bit longer.
How do you reinforce a wire fence?
The simplest way to reinforce your chain link fence at the bottom is by using tent stakes. Tent stakes can be bought at any hardware store, and they are very cheap.
How do you join wire mesh together?
0:041:07Joining Wire Netting - YouTubeYouTubeStart of suggested clipEnd of suggested clipKrump joining is a very effective way of adjusting the netting when fencing over sharp brows or dipsMoreKrump joining is a very effective way of adjusting the netting when fencing over sharp brows or dips. Once again overlap each crimp operation. However it can be done in three bites.
How do you connect two strands of electric fence?
0:091:30tying together separate strands of electric fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo in other words run the bottom wire. All the way around the perimeter. Cut it pull that suckerMoreSo in other words run the bottom wire. All the way around the perimeter. Cut it pull that sucker tight. And then repeat the process for each strand. Then when you get through you come back wherever.
How do you tie two pieces of wire together?
0:152:23Best way to connect 2 wires together (without soldering) - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure no wire is sticking out from the back. Use the uninsulated area which is the bottom andMoreMake sure no wire is sticking out from the back. Use the uninsulated area which is the bottom and crimp down as hard as you can. Now this crimp works pretty good.
How do you find underground dog fence wires?
If you just bought a home that has an invisible fence, you can use a portable AM radio to find the fence perimeter.Make sure your invisible fence is plugged in and turned on. ... Find the radio frequency that your invisible fence is using. ... Walk through your yard with the AM radio tuned to the correct radio frequency.
How do you find a break in a wire?
0:141:10How to find break, opens and shorts in wires - YouTubeYouTubeStart of suggested clipEnd of suggested clipUntil you find a signal strength indication of 50 to 75 percent this indicates the position of theMoreUntil you find a signal strength indication of 50 to 75 percent this indicates the position of the wire trace. The wire until the signal stops. This indicates a break in the wire.
What gauge wire does Invisible Fence use?
Most professionally installed systems use a 14-gauge, which uses about 4x the copper and has a thicker jacket than other sizes. This is beneficial to homeowners to reduce the chance of the wire breaking for more long-lasting use.
How do you connect wire fence together?
0:085:37How to Join Field Fencing Wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've got a new roll right here and it's joining out here in the middle. So what we've got to do isMoreWe've got a new roll right here and it's joining out here in the middle. So what we've got to do is put these two fences together so that when we pull them they will hold and not come apart.
How do you fix a welded wire fence?
0:152:47HOW TO Splice Woven Wire Fence - With Just Pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter you have the first vertical wire on both sides. Cut you're going to pull off these littleMoreAfter you have the first vertical wire on both sides. Cut you're going to pull off these little vertical wire sections.
How do I join petsafe wire?
How to splice wireStrip 3/8 inch of insulation from the end of each wire.Twist the exposed wire together.Twist a wire cap over the wires. Tie a loose knot in the wire to help secure the wires.Insert the wires into a splice capsule, then close the capsule.
How do you splice a broken barbed wire fence?
1:305:09How to Splice Barbed Wire - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo barbed wires just twist it together I'm going to untwist it about eight or ten inches or so so IMoreSo barbed wires just twist it together I'm going to untwist it about eight or ten inches or so so I have two individual strands. Then here's the new roll of barbed wire.
How Do You Fix a Broken Invisible Fence Wire?
Once you find the break, remove the insulation and twist the copper wires together. Then use electrical tape to cover the ends and keep the wires f...
How Do I Find a Broken Invisible Fence Wire
If you cannot see an obvious cause like roots or a dug-up dog fence wire, you can use either the collar or a handheld radio to find the wire break....
What Gauge Wire is Used for Invisible Fence?
Many commercial dog fences use a 20 gauge dog fence wire. Professionally installed fences may use a 14 or 16 gauge since these can be sturdier. If...
How to Join and Repair Electric Dog Fence Wire
If by any chance your wire breaks and you need to repair invisible dog fence wire or if you want to extend the area that will be covered by the electric dog fence here’s our Guide on how to do it. If the wire break is underground, you’ll need to dig up the wire first to expose the broken wire, or simply leave it there and run new wire.
How do I find a Break in my Invisible Dog Fence Wire?
If the Invisible Dog Fence Transmitter is beeping, It means you have a broken wire somewhere around the invisible dog fence perimeter. You will need to locate the break in the wire and fix it. This review shows a series of steps to help you locate the break in the wire and perform the repair.
We Opted NOT To Use Gel Joiners To Repair The Dog Fence Wire
Remember you are running a radio signal - Not Electricity. You simply need to create a connection to the copper core of the wire to continue to transmit the radio signal.
Should I Bury the Dog Fence Wire Or Have An Above Ground Dog Fence
If you have to bury your Dog Fence Wire and it breaks - it is a LOT HARDER to find the break and fix it. You can leave your dog fence wire above ground but make sure it can withstand the Australian sun and the elements.
How Invisible Fences Work
Before you start to work on your invisible fence, it’s generally a good idea to stop and figure out how the fence works. Though there are definitely technical issues that you probably don’t need to get into, there are at least some factors that are going to be important for understanding how the fence works.
Identifying a Broken Wire
The first step in fixing a broken boundary wire is learning how to identify the break. Most of the better invisible fences on the market today will typically sound an alarm when there’s a broken line, which should tell you to bring your pet back inside and to get to work as soon as you can.
Fixing a Broken Wire in an Invisible Fence
There are two options for anyone that wants to fix a wire break in an invisible fence. The first is probably the easiest, but it’s also the most costly. You can absolutely call out a professional to come to fix any wire break that you have.
Preventing Wire Breaks in Invisible Fences
As you might imagine, the best-case scenario never involves wire repairs at all. Instead, you’ll want to take steps to make sure that you minimize the possibility of wire breaks occurring at all.
