how to repair driveway apron

Apron Repair Process

• Remove your old apron and fill all of the cavities and the exposed area with class 5 gravel.
• Compact new base to eliminate drainage and settling issues.
• We use steel rebar to ensure your it is “tied into the garage floor. ...
• Apply new hot asphalt and build a seamless transition between the driveway and the garage.

More items...

Full Answer

How do you repair a concrete driveway?

• Many concrete crack fillers, sometimes called masonry crack fillers, are designed for cracks up to 1/4-inch wide. ...
• The use of a concrete backer rod is recommended for cracks wider than 1/4-inch, since these cracks are usually deep. ...
• Before you apply the new filler, break up any old concrete patch materials with a hammer or masonry chisel .

More items...

Should I repair or replace my asphalt driveway?

You may be better off with asphalt replacement. Our asphalt contractors will highly recommend replacement if your asphalt driveway or parking lot is beyond repair. While resurfacing may be less expensive in the short-term, eventually there will reach a point where the cost of repairs exceeds the cost of new asphalt installation.

When is a driveway apron recommended?

A well-constructed driveway apron facilitates a smoother and less stressful transition from the driveway to the street. Most states require the installation of a driveway apron especially if motorized vehicles use the driveway for entering and exiting.

How to repair ashphalt driveway?

Things You'll Need

• Shovel or other digging tools
• Plate tamp or plate compactor
• Asphalt mix
• Material to stabilize the base underneath the patch if needed
• Rubberized Work Gloves
• Respirator (If area is poorly ventilated)

How do you repair a concrete garage apron?

How to repair garage floor concrete damage near apron?Use quick-setting cement plus bonding adhesive to repair the large voids from the broken/missing concrete.Fill the crack to a reasonable depth with sand/backer rod and then apply a self-leveling caulking or concrete crack filler.More items...•

How much does a concrete driveway apron cost?

For a poured concrete apron, expect to pay $3 to $10 per square foot, which includes fill sand, steel reinforcement, and concrete delivered by truck (sack-type concrete is not suitable for this project). Professional installation will add another $8 to $12 per square foot.

Is the apron part of the driveway?

DRIVEWAY APRON DIAGRAMThe driveway apron is the segment of the driveway that is in front of the garage door used to turn a car into and out of the garage (see the Driveway Apron Diagram). Body length measurements were 52.06 cm in the Akkaraman and 50.38 cm in the Awassi (P <0.05).

How do you seal a driveway apron?

0:467:21How To Fill A Gap Between Garage Floor And Concrete DrivewayYouTubeStart of suggested clipEnd of suggested clipFall early winter. And then you go through expansion and contraction which can start to break downMoreFall early winter. And then you go through expansion and contraction which can start to break down your concrete.

Who is responsible for the driveway apron?

Per the California Streets and Highways Code section 5610 and Resolution 85-45 of the City, such repairs to sidewalk/driveway apron or parkway areas are the responsibility of the adjacent/abutting property owner.

How do you install a driveway apron?

0:173:30How to Build a Driveway Apron | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo make the cut use a concrete saw fitted with a diamond blade on the first pass make a shallow. CutMoreTo make the cut use a concrete saw fitted with a diamond blade on the first pass make a shallow. Cut then attach a garden hose to the saw.

What is a concrete apron?

What Is a Concrete Apron? A concrete apron, also known as "an approach," is a section of concrete inserted in one of three places: In front of a garage. Around the perimeter of a building. The entrance to a parking lot or driveway.

Do I need a garage apron?

A concrete apron is important because it provides a necessary transition between the driveway level and the garage floor. The driveway is not always level with the garage floor. Concrete garage aprons are poured in a gradual slope from the driveway to the garage floor.

What is apron construction?

Apron: a smooth (generally concrete) surface that is placed between culvert and channel to improve capacity and reduce erosion.

How do you finish a concrete apron?

1:277:48Concrete Apron In Front Of Garage (Pouring & Finishing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs we move our way to the left because of the slope of the driveway you'll see that coming up in aMoreAs we move our way to the left because of the slope of the driveway you'll see that coming up in a different angle here in a minute the apron actually starts sloping a little bit more.

How do I seal the gap between my driveway and foundation?

1:186:23How To Waterproof Crack Where Driveway, Basement and House ...YouTubeStart of suggested clipEnd of suggested clipHere's one of the main tricks of combing is you have a cardboard box with that way when you stop andMoreHere's one of the main tricks of combing is you have a cardboard box with that way when you stop and start you don't have foam drizzling all over.

How do you fill the gap between driveway and curb?

1:2911:17How To Seal A Gap Between Concrete Slabs - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow if i have any large holes where voids are starting to form underneath the concrete. I doMoreNow if i have any large holes where voids are starting to form underneath the concrete. I do recommend some sand for that and filling those voids in before you seal off the top with the tremco.

How do you build a concrete driveway apron?

1:2821:57How To Form And Pour A Concrete Driveway Apron With A Tench Drain.YouTubeStart of suggested clipEnd of suggested clipAnd then it's going to slope down an inch to the trench drain the trench drain is going right in theMoreAnd then it's going to slope down an inch to the trench drain the trench drain is going right in the center of this thing you can see those two metal pins kind of in the center.

What is a concrete apron?

What Is a Concrete Apron? A concrete apron, also known as "an approach," is a section of concrete inserted in one of three places: In front of a garage. Around the perimeter of a building. The entrance to a parking lot or driveway.

How much does it cost to pour a 24x24 slab of concrete?

A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

Do I need a garage apron?

A concrete apron is important because it provides a necessary transition between the driveway level and the garage floor. The driveway is not always level with the garage floor. Concrete garage aprons are poured in a gradual slope from the driveway to the garage floor.

Why do you need an apron for a driveway?

When your driveway sinks, an apron will help prevent cracks and damage to your driveway and garage floor.

What is a Driveway Apron?

A driveway can have two aprons – one at the driveway’s entry point, beginning at the curb or roadside, and one that connects the driveway to your garage. Driveway aprons at the end of the a driveway are usually decorative in nature, but an apron that meets a garage is meant to ensure the stability of your driveway and your garage’s foundation. When your driveway and garage floor are aligned, it’s easy for you to travel in and out of your garage. However, driveways can sink slightly over time. They have the potential to fall inches lower than their original height, leaving a gap of space that can cause serious structural damage to your driveway and garage floor. That’s where driveway aprons play a huge role in saving your driveway. When your driveway sinks, an apron will help prevent cracks and damage to your driveway and garage floor.

Why is my driveway apron water penetrating?

Water penetrating the seam between the garage apron and driveway due to lack of, or improper, sealing.

Why does water penetrating the seam between the garage apron and driveway?

Water penetrating the seam between the garage apron and driveway due to lack of, or improper, sealing. Erosion of the base material creates a cavity under the apron, allowing the asphalt to settle.

What happens if you crack your driveway?

When there are any cracks in your driveway, water begins to pool and seep into the soil and foundation of your driveway, breaking down your asphalt’s foundation. This is especially common in driveway aprons, which are prone to cracking. When your driveway begins to sink and your asphalt apron needs repairs, Seal King can seal asphalt cracks ...

What is the purpose of a plate compactor?

Compaction: Plate compactors and asphalt rollers are used to compact new asphalt, creating a manicured and professional finish.

What is fill foundation holes?

Fill Foundation Holes: Any holes discovered are filled and compacted with new gravel.

What to do if your driveway apron is bad?

If your driveway apron is in bad shape (presenting a danger to pedestrians), the local Code Compliance officer may ask you to have it repaired, which may include patching it (to the city’s standards) or replacing it. If you don’t, the city could fix it and then charge you for the repairs.

What is an apron in a driveway?

The apron, also known as the approach, is the part of the driveway closest to the road and usually made from the same material as the rest of the driveway. Because driveway aprons are regulated by building codes in most communities, replacing yours—because it’s in bad shape or you’d like to widen the driveway—can be complicated.

How long is a driveway apron?

Driveway aprons vary in length from about eight to 15 feet (starting at the street and measuring toward the house). Since the apron is a part of the driveway, its width (side to side) is identical to the width of the rest of the driveway—most of the time you can’t tell where the apron starts and the driveway stops.

How to get a spec sheet for an apron?

Obtain a spec sheet from your local building authority when you apply for your permit and follow it exactly. The spec sheet will give you the allowable dimensions for your apron in addition to its required thickness, the amount of fill and reinforcement, and the type (s) of material you can use.

How much does it cost to install asphalt?

Asphalt, which must be installed by a paving company, runs approximately $3 to $6 per square foot. The company may also charge a setup fee, which could add another $1,000. Expect to pay $3 to $10 per square foot for materials if you want to install a paver or cobblestone apron.

How much does it cost to build an apron?

For a poured concrete apron, expect to pay $3 to $10 per square foot, which includes fill sand, steel reinforcement, and concrete delivered by truck (sack-type concrete is not suitable for this project). Professional installation will add another $8 to $12 per square foot.

Where is the apron on a sidewalk?

If sidewalks are present, the apron typically extends to the edge of the sidewalk closest to the house. In many communities, the area on the street side of a sidewalk is considered an easement that the city controls. This is the area where you’ll find buried municipal water lines and storm drains.

Why is it important to repair a garage apron?

Garage apron repair is important for a number of reasons, one of the most important being that it can prevent damage to your house caused by settling. At the time of construction, the process of creating your garage’s apron involved filling footings with gravel.

What is seal king driveway?

Seal King Professional Sealcoating offers a full range of driveway surface repair services, including garage apron repair, edge repair, and of course total resurfacing of driveways. Garage apron repair is important for a number of reasons, one of the most important being that it can prevent damage to your house caused by settling. At the time of construction, the process of creating your garage’s apron involved filling footings with gravel. Over time, gravel can settle, which can lead to open spaces under your garage, where there should be none. When settling creates empty space, it is important to fill it with fresh gravel to arrest the damage caused by the settling.

How much does it cost to dig out an asphalt driveway?

If you don’t, water will pool in the depression, seep into the soil below, and eventually destroy the driveway. Asphalt companies charge about $1,000 to dig out the old portion and install a new apron. Concrete contractors charge even more. But you can rebuild your asphalt driveway apron yourself.

When is the best time to repair a driveway?

So the best time to do the project is during an extended warm, dry spell. You can do it in spring or fall, but cold weather and rain will greatly extend the cure time. This driveway repair is a messy job, and no matter how careful you are, you’re going to get tar on your clothes and shoes. You can’t wash off the tar with soap and water.

How to build a cold patch?

Pour in a small amount of cold patch material and level it with a square-blade shovel. Tamp down a test section and measure the depth. The bottom layer should only be 1/2 in. thick when compacted. Add or remove cold patch material and then tamp down the entire starter row. Photo 3: Build additional layers.

How does cold patch work?

Cold patch works only when it’s compacted and “keyed” into at least two vertical surfaces. So don’t think you can build up the driveway height by pouring cold patch on top of the old sunken asphalt—the patching material will just break off in chunks. Instead, you’ll have to cut out the sunken asphalt (Photo 1).

Can you wash tar off a driveway?

You can’t wash off the tar with soap and water. So wear old clothes and shoes that you can toss into the trash when you’re done. If you have to go into the house during the project, leave your shoes outside so you don’t track tar into the house. Here’s how to make the DIY driveway repair.

Can you fix a sinking driveway apron?

But when your driveway repair has sunk to the point where it’s 4 or 5 in. lower than your garage floor, it’s time to fix it. If you don’t, water will pool in the depression, seep into the soil below, and eventually destroy the driveway.