The disc player will not turn on or has no power.
- Make sure the power cord is securely connected to the player and plugged into a working electrical outlet. ...
- Try turning on the power by pressing the POWER button on the front of the player. ...
- If the player is connected to the TV via HDMI® cable, disconnect the HDMI from the player and press the power button again on the unit. ...
- If possible, try a different high speed HDMI cable
- Try plugging the power cord into a different electrical outlet.
Full Answer
What should I do if my disc player will not turn on?
The disc player will not turn on or has no power. Follow the steps below to troubleshoot this issue. Make sure the power cord is securely connected to the player and plugged into a working electrical outlet. IMPORTANT: After plugging the player into an electrical outlet for the first time, wait 10 seconds before trying to turn on the power.
Why won't my Philips Player connect to the TV?
Also, make sure nothing is blocking the infrared (IR) sensor on the player. If the player is connected to the TV via HDMI® cable, disconnect the HDMI from the player and press the power button again on the unit. Once the unit is on, turn off the Control for HDMI from the System Settings menu.
How do I Turn Off the HDMI on my Philips Player?
If the player is connected to the TV via HDMI® cable, disconnect the HDMI from the player and press the power button again on the unit. Once the unit is on, turn off the Control for HDMI from the System Settings menu. Try plugging the power cord into a different electrical outlet.
How do you fix a DVD player that won't turn on?
The disc player will not turn on or has no power.Make sure the power cord is securely connected to the player and plugged into a working electrical outlet. ... Try turning on the power by pressing the POWER button on the front of the player.More items...•
Can DVD player be repaired?
You can clean the machine, replace cords, and replace faulty motors, belts, and trays. More often, problems with DVD players are caused by faulty DVD discs, either damaged or dirty. A good investment is a CD/DVD repair kit for polishing out surface scratches, available at larger stores where CDs and DVDs are sold.
What do you do when your DVD player doesn't work?
How to Fix DVD Won't Play - 7 SolutionsSolution 1: Check if the DVD type is incompatible with DVD player.Solution 2: Clean the dirty DVD or try a different disc.Solution 3: Ensure solid connection between DVD player and TV.Solution 4: Install Third Party DVD Player Software.Solution 5: Update DVD Firmware.More items...•
Is there a reset button on a DVD player?
You can reset your DVD player either via a remote control combination button press or via the screen menu (SETUP) return set (reset). Your instruction manual will normally give accurate instructions for resetting the player. Look over the chapeter titled "reset" or "Initialize mode" .
How do I get my DVD player to work?
To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.
How do you service a DVD player?
0:2810:55DVD PLAYER SERVICING BASICS - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's go ahead and pull the mechanism out of this unit or start by unplugging all the cables thatMoreSo let's go ahead and pull the mechanism out of this unit or start by unplugging all the cables that go to the DVD mechanism.
Why do DVDs stop working?
Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player's disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.
How do I check if my DVD drive is working?
If not, refer to the Dell Knowledge Base article Optical Drive is not recognized in Windows.Press the Windows key + R to open the Run dialog box.In the Run dialog box, type devmgmt. msc then press the Enter key.In the Device Manager window, expand DVD/CD-ROM drives. Verify that the optical drive is listed.
How do I fix my DVD drive?
Boot to the Windows 10 desktop, then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. Exit Device Manager then restart your computer. Windows 10 will detect the drive then reinstall it.
How do you reboot a DVD?
Ensure no discs are playing in the DVD player. On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET .
How do I reboot a DVD without a remote?
Use the Built-in Controls on Your DVD Player. Some DVD players have basic buttons on the front or top of the player to allow you to play, pause, skip, stop, fast forward, eject, power on and power off. These buttons can help you play DVD without remote, although it doesn't seem to go easily.
Why is my Samsung DVD player not turning on?
Bad cord or power connection. If the cord detaches from the player, make sure there is no debris inside the cord or player. If you can, use a multi meter to test continuity. Also, make sure that outlet is good by plugging other devices into it.
Why won't my portable DVD player read discs?
Why Your DVD Player Won't Read Disc? The most likely and common causes include: The DVD disc isn't placed properly. The disc is dirty (check how to clean a dirty DVD), damaged or burned in player-incompatible format.
How do I reset my Sony DVD player without a remote?
Press and hold the power button for approximately ten seconds, or until the device is turned off all the way. Then wait for ten seconds and turn the player back on. If the device does not respond to the power button, you can unplug it from the power supply and then plug it back in after ten seconds.
How do I reset my Sharp DVD player?
0:092:303 ways to reset TVs, Sharp TV fix review - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then go down down down you use your volume and channel buttons to navigate on the TV. If you donMoreAnd then go down down down you use your volume and channel buttons to navigate on the TV. If you don't have the TV remote. And then go down to reset. Right here and then you get hit okay.
How do I reset my Sony DVD player?
Follow these steps to perform a factory reset on your Blu-ray Disc™ player:On the supplied remote control, press the HOME button.Select Setup.Select Resetting or. icon.Select Reset to Factory Defaults Settings.Select All Settings.Select Start.Select Close.Turn off your device, then turn it back on.