- Start by removing the tie wires closest to the damaged section using pliers.
- Next, connect a fence puller to both the post and fence and draw the fence tight enough to take tension off the tension...
- Remove the damaged section by opening the loop at the top and bottom of a strand just outside the damaged area. Use a...
- Cut a section of mesh the same size as the one you...
How do you fix a leaning fence post?
If your wood fence post is leaning, the post may have shifted or rotted and need to be replaced. If the post is set in concrete, you’ll need to break up the concrete footing and install a new post. Begin by removing any parts in the way of the repair.
What is a concrete footing for a fence?
The concrete footing is the solid mass of concrete buried deep in the ground at the base of the post. This footing supports the weight of the post and the attached fence, preventing it from twisting, pulling, and leaning when weight is applied to the fence or the fence is hit with heavy winds.
Can you replace a fence post without removing the footing?
However, when replacing a fence post, the concrete footing also needs to be removed. The reason for this is that the new fence post needs to be able to occupy the same space as the old post in order to properly support the existing fence instead of putting strain on the structure.
How do you brace a fence post for footings?
Drive a stake into the ground about 24 to 36 inches from the metal fence post to brace the fence, and then screw the stake to the brace with a single screw. Next, use a level to plumb the fence post, and then clamp it to the brace. Finish by mixing bagged concrete with water and pour the new footings using the same methods described above.
What causes a fence post to be damaged?
Why do you take a look at fence posts?
How long does it take for a concrete fence to cure?
Why is it important to have a fence around your house?
Do you need to dig twice to replace a fence post?
About this website
How do you fix a loose fence post in concrete?
1:158:49Can We Use Post Foam to FIX Our Wobbly Fence Posts? - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace it back in the hole. Place third over top of it. And what this does is it forces the foam downMorePlace it back in the hole. Place third over top of it. And what this does is it forces the foam down into all of the voids. And once it hardens. It's really gonna firm up this post.
How do you reinforce a rotting fence post?
1:527:34How to Fix a Broken Fence Post in Under 30 Minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's just rotted down below where it broke. And I'll take something to kind of scrape in there. So IMoreIt's just rotted down below where it broke. And I'll take something to kind of scrape in there. So I find the hole in the concrete where the post sits.
Can you reuse a concrete post footing?
Posts with concrete at the base are the most difficult to remove and reuse because the concrete base is larger than the post, which makes pulling it up through the ground much harder.
How do you fix a sinking fence post?
1:144:04Trick to Raise an Existing Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what i do is i dig out a half circle so i dig out half the post. This one i already dug out and iMoreSo what i do is i dig out a half circle so i dig out half the post. This one i already dug out and i'm turning back filled in but i dig i have to post right here like a half moon.
How do you fix rotting wood post without replacing it?
3:437:27How to Repair a Rotted Porch Post | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut i still don't have a lot of lateral. Strength. So what i like to do is put a scarf or a half lapMoreBut i still don't have a lot of lateral. Strength. So what i like to do is put a scarf or a half lap joint when i put the two pieces.
How do you fix a rotted 4x4 fence post?
0:315:33How to Replace a Rotted Fence Post | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then I'm going to have you take the circular saw and make a cut here and here we're going toMoreAnd then I'm going to have you take the circular saw and make a cut here and here we're going to take out that piece of wood and release the rails. By cutting the post above.
How do you remove concrete footings from the post?
How to Remove Concrete Post FootingsBrush away loose dirt to expose the top of the concrete footing at the base of the post.Loosen the upper layer of soil around the outer edge of the concrete footing, using a digging bar. ... Break the concrete footing into two or more sections, using a cold chisel and steel mallet.More items...
How do you pour a concrete footing for a fence?
0:244:52Part 12 - Pouring Concrete Fence Footing And Finishing Shaped TopYouTubeStart of suggested clipEnd of suggested clipI don't I mix it in the wheel barrel. And then carry it up to wherever I need to do it but you canMoreI don't I mix it in the wheel barrel. And then carry it up to wherever I need to do it but you can get a wheelbarrow. Around. Then definitely mix it whatever is going to be easiest for you.
How do you raise a concrete post?
1:122:56How To Raise Wood Fence Post Concrete Footing - Hillside RepairsYouTubeStart of suggested clipEnd of suggested clipSo again just film some concrete in there. And as i raise the concrete. As the concrete gets higherMoreSo again just film some concrete in there. And as i raise the concrete. As the concrete gets higher i can just simply add more soil.
How do you reinforce wood fence posts?
0:198:35The Forever Fence Post Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight in the center of the bad post that you have on either side and you install these galvanizedMoreRight in the center of the bad post that you have on either side and you install these galvanized fence posts. So this one here is just sitting in the hole right now.
How do you stop a rotting post?
Fill the first three inches up with gravel so the end of the post doesn't come into contact with the dirt. Gravel allows water to drain quickly away from the post and into the soil. Be sure to place the post in the center of the hole. Finally, fill the entire hole up with cement to the top.
How do you reinforce a weak fence?
0:4613:36DIY! Repair Loose Fence Posts on Wooden Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I picked up all the materials I need at Home Depot to 4x4 eight-foot long fence posts 12 LMoreSo I picked up all the materials I need at Home Depot to 4x4 eight-foot long fence posts 12 L brackets and a box of number 9 one and a half inch screws and three 50-pound bags of quikrete.
How do you make an old fence stronger?
Steps:Dig holes around the fence posts. ... Drive stakes into the ground a few feet out from the fence and attach support boards running to the fence. ... Use a 2-by-4 to tamp the earth around each post.Fill the hole about 1/3 full of gravel, and tamp the gravel down.More items...
What causes a fence post to be damaged?
Common factors that can contribute to ongoing damage include highly acidic concrete footings, moisture traps that collect rainwater at the base of the fence post, and insect infestations, like carpenter ants, termites, and powderpost beetles. 3.
Why do you take a look at fence posts?
The reason to take a look at the non-damaged part of the post is to help determine the current quality of the wood. If the entire fence post is just a year or two away from needing to be replaced, then it would make more sense to complete the replacement immediately instead of repairing it.
How long does it take for a concrete fence to cure?
Allow about three days for the concrete to cure, then reattach the fence pieces to the fence post with new brackets and screws.
Why is it important to have a fence around your house?
Having a fence up around the yard gives the home a number of advantages, including increased privacy, security, and safety. In fact, in some locations, a fence is mandatory if the home has a pool, so it’s important that the fence is strong and sturdy in order to support any weight applied to it, like a person leaning, ...
Do you need to dig twice to replace a fence post?
Ensure proper footing depth for the replacement fence post. While removing the concrete footing is a labor-intensive task, the good news is that the hole doesn’t need to be dug twice, so you just need to make sure that it’s at the right depth to create a proper footing for the replacement fence post.
What is Post Buddy?
Basically the Post Buddy System is a fence post repair kit consisting of a set of two 5 ft. long steel stakes that you hammer into the ground at the base of the fence post and between the concrete footing. Note: The Post Buddy System is not recommended for posts set directly into sand, dirt, or anything other than concrete or cement, unfortunately.
Steps for Installing Post Buddy
Clear away the soil and debris right around the fence post. Ken used his hands, but you can use a shovel, as well.
Is Post Buddy easy to do?
Ken was able to do the full installation for all 3 fence posts in about 2 hours.
How many Post Buddy sets do you need for repair?
Post Buddy is available in sets of two for repairing one post per set.
More yard and garden ideas you might like
This site uses Akismet to reduce spam. Learn how your comment data is processed.
Should You Repair or Replace Your Fence?
Wood fencing is by far the most common fencing material. It’s available as privacy fencing, which is tall and completely blocks the view. Another common type of wood fencing is spaced picket fencing, which has gaps throughout each panel. Vinyl fencing is available in these two styles.
How to Break Up Old Concrete Fence Post Footing
The most common task when fixing a fence is dealing with rotted posts. If your wood fence post is leaning, the post may have shifted or rotted and need to be replaced. If the post is set in concrete, you’ll need to break up the concrete footing and install a new post.
How to Replace a Damaged Fence Post
Once the concrete footing has been removed, replace the damaged post with a new one. If the original post had holes in it, ensure that the hole spacing of the new post matches.
How to Brace a Fence Post Plumb
The next step in fixing a fence post is to ensure that it is perfectly straight, or plumb, and does not lean in the hole. There are a number of ways to brace a post plumb. The easiest and most economical way is to use scrap material cut about 24- to 48-inches long, depending on the height of your fence.
How to Pour Concrete for a Fence Post
With the post secured to the panels and plumbed in place, it’s now time to pour the concrete mix for the new footing.
How to Repair Fence Gates
If a wooden gate droops and you don’t have diagonal cross braces, install an anti-sag kit that has a turnbuckle, a length of cable and some eye hooks. Anti-sag kits can be purchased separately or as part of a gate kit, which includes hinges and latch hardware.
How to Repair a Chain Link Fence
To repair a damaged section of chain-link fence, first you need to get tension off the mesh.
What happens if a fence post is broken?
Depending on what kind of fence it is, the wire, boards or rails will have to be unfastened from the post.
How to fix a broken post?
Step 1. Test the post to determine the cause of its being loose. Push the post back and forth and study the ground. If the post is intact the whole length of it will move. If the post is broken in the ground the post will rock and twist at the point of the break.
Why is my fence post loose?
It was not tamped in properly when the post was first put in, and as the ground settles, a gap opens around the post allowing it to shift. The second cause is that the post has rotted or broken off below the ground.
What to do if a post is broken?
You will use it to fill in around the post. If there is a broken piece of post in the hole, remove it. When you have dug out the hole, put the post back in. If the post was broken, put a replacement post in the hole.
How to set up a new post with two people?
Setting a new post is easier with two people. One can ratchet the jack while the other lifts on the post. One can shovel dirt in around the post and tamp while the other person keeps the post level. A string can be run from one post to another, with the new post in the middle and set up against the string to keep the posts in line.
What causes a fence post to be damaged?
Common factors that can contribute to ongoing damage include highly acidic concrete footings, moisture traps that collect rainwater at the base of the fence post, and insect infestations, like carpenter ants, termites, and powderpost beetles. 3.
Why do you take a look at fence posts?
The reason to take a look at the non-damaged part of the post is to help determine the current quality of the wood. If the entire fence post is just a year or two away from needing to be replaced, then it would make more sense to complete the replacement immediately instead of repairing it.
How long does it take for a concrete fence to cure?
Allow about three days for the concrete to cure, then reattach the fence pieces to the fence post with new brackets and screws.
Why is it important to have a fence around your house?
Having a fence up around the yard gives the home a number of advantages, including increased privacy, security, and safety. In fact, in some locations, a fence is mandatory if the home has a pool, so it’s important that the fence is strong and sturdy in order to support any weight applied to it, like a person leaning, ...
Do you need to dig twice to replace a fence post?
Ensure proper footing depth for the replacement fence post. While removing the concrete footing is a labor-intensive task, the good news is that the hole doesn’t need to be dug twice, so you just need to make sure that it’s at the right depth to create a proper footing for the replacement fence post.
