Repairing Guides

how to repair gas logs

by Alexane Reinger Published 3 years ago Updated 2 years ago
image

However, in general, the process looks somewhat like this:

  • Turn off the gas.
  • Remove the old logs from the fireplace. You may want to wear protective gloves to keep your hands clean and protected.
  • Remove the grate. Your grate is likely secured in place with screws, so be sure to have a screwdriver on hand to remove those and then the grate.
  • Disconnect the burner and gas line.
  • Clean out your fireplace. This will ensure a safe installation process of your new gas logs.
  • Connect the new log set’s gas line to the burner.
  • Secure the burner and grate. Again, you may need to use a screwdriver or other tools to do this — check your log set model for specific instructions.
  • Inspect the log set for leaks. This is very important! Don’t skip this step. To test for leaks, turn on your gas supply. ...
  • Install the gas logs. Again, be sure to look at your instructions for specifics on how to place your gas logs on your burner and grate.

What to know before installing gas logs?

  • Applying pipe thread sealant around the gas line connection on the burner.
  • Attach the gas supply line to the burner.
  • Fasten the connection tightly using a wrench.

What is the best way to clean gas fireplace logs?

  • Turn off the gas valve. ...
  • Make a deep cleaning solution. ...
  • Carefully remove the ceramic logs and place them on a drop cloth or old towel. ...
  • Scoop out any stones and put them in a container. ...
  • If your fireplace has glass wool, put it in a container for safe keeping before you vacuum.

More items...

Do you have to replace gas fireplace logs?

The good news is you don’t need to replace your entire fireplace setup to improve its performance or appearance. Changing just the logs can give your fireplace the reboot it needs. The ceramic logs for gas fireplaces have improved through the years so that they mimic real wood with great detail. They are complete with cut marks and branches.

How to remove soot from gas logs?

The best ways to clean a buildup of soot off gas fireplace logs are:

  • Use a handheld vacuum
  • Scrub the logs with a soft cloth.
  • Use a soft-bristled scrub brush.
  • Use a cloth dampened with warm water if your fireplace manual does not warn against cleaning the logs with water.

How do I clean a gas log fireplace?

Is gas log maintenance good?

image

How do I fix my gas logs?

0:003:29Gas fireplace repair - WON'T Work, Start or Light - piezo ignitor spark ...YouTubeStart of suggested clipEnd of suggested clipBottom taking a look inside you can see the parts where the spark is supposed to emanate from andMoreBottom taking a look inside you can see the parts where the spark is supposed to emanate from and right here we have a thermocouple. And that just measures the temperature. Right.

Can you repair gas fireplace logs?

A technician can clear dirt and debris and check for any indications of damage. You should call for maintenance once a year to check for both dirt and a faulty gas line. Cracked Logs: Finally, you may choose to repair your gas log fireplace if the logs become cracked or otherwise damaged.

How do you fix a gas fireplace that won't stay lit?

2:427:58Fireplace Won't Stay Lit? This Is How You Fix It! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt won't it takes a while to push the gas through so don't be surprised if you've got to hold it forMoreIt won't it takes a while to push the gas through so don't be surprised if you've got to hold it for a while. So nothing is happening i'm getting spark.

Why won't my gas logs light?

If gas is coming out of the pilot but it still won't light, the spark igniter could be the problem. You should clear out any debris between the igniter and thermocouple. Blowing compressed air into the pilot area, waiting a couple minutes, then trying again could help to fix the problem.

How much does it cost to replace gas logs?

The cost to replace gas logs varies depending on the size, material, and brand. Typically, log sets can cost anywhere from just over $100 to over $1000. The average sets cost somewhere in the $400-$700 range.

What is the life expectancy of a gas fireplace?

How Long Can a Gas Fireplace Last? Generally speaking, you can get a good ten to fifteen years of use before you need to replace your gas fireplace.

How do I clean the thermocouple on my gas logs?

How to Clean a Thermocouple on a Gas Fireplace [3 Steps]Step 1: Leave the gas to cool first if it has been burning.Step 2: Polish the thermocouple.Step 3: Blow it out.Step 4: Light the gas.

How do I know if my thermocouple is bad on my gas fireplace?

2:313:43Fireplace How To: Testing A Thermocouple - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou should replace the thermocouple. So to recap the readings to look for are 8 to 30 millivolts.MoreYou should replace the thermocouple. So to recap the readings to look for are 8 to 30 millivolts. And if the readings are less than 7million. You should replace the thermocouple.

Why do my gas logs keep shutting off?

It is a sensor that monitors the amount of oxygen that is in the room with the gas fireplace. If it detects that there is not enough oxygen present, its job is to turn off the fireplace. This is an important safety feature that protects you from carbon monoxide poisoning, which can be fatal.

How much does it cost to replace a thermocouple in a gas fireplace?

between $150 and $250When replacing a thermocouple or thermopile with the help of a professional, you can expect to pay between $150 and $250.

How do you fix a gas fireplace flame?

0:032:47How To Adjust The Height Of The Flame In A Fireplace - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you want the flame higher we'll lower it'll say to increase it or decrease it. Or I'll say highMoreIf you want the flame higher we'll lower it'll say to increase it or decrease it. Or I'll say high and low and you just rotate it around according to what you what you would.

What do I do if my pilot light won't light?

If your pilot light won't stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.

Can you replace a gas fireplace insert?

It can be done, but it's worth looking at all options before committing to repair. Repairing your gas fireplace may be the better option if: The existing fireplace still fits your home aesthetically. There's a minor mechanical problem or broken part.

How much does it cost to replace a pilot light on a gas fireplace?

If you need your pilot light fixed, most professionals will complete the repair for about $150, on average. When replacing a thermocouple or thermopile with the help of a professional, you can expect to pay between $150 and $250.

How long does a thermocouple last on a gas fireplace?

10 yearsThermocouples can last up to 10 years if properly installed and maintained, while furnaces can last 15-20 years, although either may wear out sooner in multifamily units.

When should a gas fireplace be replaced?

Gas Fireplace: When to Replace A typical fireplace latest 10-15 years, depending on the maintenance and quality. Homeowners may also want a fireplace makeover with modern features and better aesthetics.

How do I replace gas logs?

However, in general, the process looks somewhat like this: Turn off the gas. Remove the old logs from the fireplace. You may want to wear protective gloves to keep your hands clean and protected.

How much does it cost to replace gas logs?

The cost to replace gas logs varies depending on the size, material, and brand. Typically, log sets can cost anywhere from just over $100 to over $1000. The average sets cost somewhere in the $400-$700 range. We’ve pulled some of our popular sets below.

What is gas log made of?

Material: Gas logs are usually made of ceramic, which allows them to withstand very hot temperatures. Log sets that use cement logs will fade in appearance over time. Depending on use, they can begin to lose their appearance in 2-3 years.

How to test gas line for leaks?

To test for leaks, turn on your gas supply. Then, use a spray bottle to spray a small amount of water and soap on the gas line connection. If bubbles form, you’ll know there’s a leak. Tighten the connection or replace the gas line altogether. Install the gas logs.

Do gas fireplaces need maintenance?

From the efficiency to the aesthetic, you feel as if your gas fireplace offers all the benefits of a real, wood-burning fireplace, without all the hassle. Life is good! However, like any home appliance, gas fireplaces require routine maintenance. If you’re wondering do gas log wear out, the answer is yes. While you certainly won’t be replacing your ...

Can you use a gas fireplace without a log?

There’s a wide variety of gas log styles available, so changing them out gives you the chance to transform the overall look of your setup. If you’d like to use your gas fireplace without logs, you also have the option to use fireplace glass instead. This will require a burner pan that is made for fire glass.

Is ceramic a good gas log?

Made in the USA is a good indicator of a quality set of gas logs. Additionally, you’ll want to pay attention to the material. Ceramic is durable and able to stand up to the hot temperatures of a fireplace. A gas log replacement project also gives you the option to change up the style of your fireplace.

How do I clean a gas log fireplace?

Gas logs don't need much cleaning, but if you want to make them look like new, first make sure they are turned off and are not hot to the touch. Then brush your gas logs with a soft-bristled brush or a duster to remove any dust or dirt. Do not remove your gas logs from the fireplace to clean them - leave them in their installed position. Never use water or any other solvents to clean gas logs.

Is gas log maintenance good?

Gas log maintenance is relatively simple, which is one of the best things about owning a set. There's none of the hauling and sweeping associated with real wood, and no sparks to worry about. Here are a few rules of thumb for keeping your gas log set well-maintained:

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9