how to repair hole in bounce house

Step-by-Step Guide to Patch a Hole in Your Bounce House.

• Step 1: Clean the Affected Area. You can’t patch the bounce house leak correctly if dirt, sand, grease, or any other debris sits on the area. If you ...
• Step 2: Cut Out the Patch in an Oval or Circular Shape.
• Step 3: Don’t Let the Patch Curl Up.
• Step 4: Apply Your Glue.
• Step 5: Apply the Patch Firmly to the Vinyl.

Full Answer

How do you fix a broken bounce house patch?

Check to make sure the edges of the patch are completely glued to the bounce house. If there are any pieces of the patch peeling away, put more glue and apply pressure until the patch is completely adhered to the bounce house. Let the glue dry for a couple hours before using the bounce house.

How do you know if there is a hole in bounce house?

There’s a few ways you can easily find if there’s hole in a bounce house, but for smaller leaks, it can be more difficult to find. The simplest way is to walk around the bounce house while inflated and the blower running and feel for any air escaping the bounce house where it shouldn’t be.

Will duct tape fix a leaking bounce house?

Duct tape may work decently on smaller bounce houses, but at best, it’s a very temporary fix. Another quick fix options is to get some Vinyl Repair Tape (link to Amazon) and tape over the leak with that. For us, this has had more success than a duct tape fix, but still is not a long term solution.

How to find a leak in a bounce house?

Place your hand close to the bounce house as you walk around inspecting it. You will easily be able to feel large leaks this way. If you still can’t find the leak by feel, you’re going to have to coat the bounce house in soapy water. The leak will create bubbles when covered with soapy water.

What kind of glue do you use to patch a bounce house?

vinyl cementSimply apply the vinyl cement to the cleaned area on the unit and also on the secondary vinyl (patch or what you are gluing to the inflatable). The vinyl cement needs to dry for a couple of minutes to become tacky then apply together with pressure for a few minutes.

How do you fix a rip in a bouncy castle?

0:527:56How To Repair a Bounce House | Repair a Bouncy Castle - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know alcohol it's going to dry very quickly. And then you're going to take your TPU patchMoreYou know alcohol it's going to dry very quickly. And then you're going to take your TPU patch material peel it from its backing. And apply it carefully to the area that's being repaired.

How do you fix a hole in a seam of inflatable bounce house?

0:531:52How to patch a leaking seam with repair tape - Bounce House TutorialYouTubeStart of suggested clipEnd of suggested clipOut any of the air bubbles. And make sure that the patch is secure. Once you push out all of the airMoreOut any of the air bubbles. And make sure that the patch is secure. Once you push out all of the air bubbles your patch is completed. And you forget prevented any air from leaking out of the seam.

Can You Use Flex Seal on a bounce house?

0:021:532018.10.14 - Using flex-seal tape to fix bouncy houses - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe just apply that right in there and it sticks all the time keeps all that air from coming out andMoreWe just apply that right in there and it sticks all the time keeps all that air from coming out and it's got a nice clean.

Can you sew a bounce house?

0:101:48Repair Damaged Stitching using a Sewing Awl Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push theMoreStart off roughly a quarter inch away from the damaged. Area. With your sewing awl kit push the needle through the vinyl and pull the end of the thread all the way out.

How do you find a hole in a bounce house?

0:021:16Life Hack: Easily find the leak in an inflatable object - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you don't actually know where just spray the area rub. It in. There it is right. There. Do itMoreAnd you don't actually know where just spray the area rub. It in. There it is right. There. Do it again there. That's where the hole.

How do you fix a hole in inflatable seams?

2:013:55Invisible Seam Repair on an Inflatable Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of theMoreAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of the vinyl cement. So i quickly reach for the paper towel to dab away the excess.

How do you sew a jumping house?

1:515:20How To Stitch And Patch A Cut On An Inflatable Bounce House - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the knot underneath. You're going to go across from the hole you started on once you get itMoreWith the knot underneath. You're going to go across from the hole you started on once you get it underneath you're going to zigzag you can go diagonally to the other side. And come back up like that.

How do you repair vinyl inflatables?

1:214:18Best way to repair air leak in vinyl inflatables, like pool toys ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll I did was I applied a little bit to the air leak. And let that dry I applied a little more I putMoreAll I did was I applied a little bit to the air leak. And let that dry I applied a little more I put a patch over it. And then applied even more shuuyu over the top of it.

Does Flex Seal stick to rubber?

Flex Seal is a liquid rubber sealant coating that's perfect for almost any DIY project inside or outside your house. Flex Seal can be used on almost every surface: wood, metal, tile, concrete, masonry, fabric, glass, plastic, aluminum, porcelain, drywall, rubber, cement, and vinyl.

How long does Flex Seal last outdoors?

up to 30 yearsA: Flex Shot will last up to 30 years and will not fade, dry, crack, yellow or deteriorate.

Can flex tape handle pressure?

A: Flex Seal will withstand normal hydrostatic water pressure such as rainwater, but it is not made to withstand extreme pressure.

How to Find the Hole in Your Bounce House

It’s not always an easy task to find smaller holes in the house. For your first attempt at finding one, run the blower so you can walk the perimeter and feel for any air escaping.

Step-by-Step Guide to Patch a Hole in Your Bounce House

Fix your bounce house properly by using a proper vinyl patch kit. It does take a little time to accomplish your task. However, the bit that takes the longest amount of time is finding the leak. Since you already found it using the above tips, you’re already about halfway to completing the job and getting back to sitting in the shade.

Quick Patch Options

If you’re short on time, then you can use one of two quick patch options:

Is the Tear at the Seam?

If you discover that stitching has become damaged or the tear causing the leak is on a seam, then you can consider sewing the seam. A quality sewing awl kit gives you everything you need to sew the seam.

When to Call in a Professional

If you’ve followed the step-by-step instructions, made your repairs, and the problem persists, then it’s a good idea to call an inflatable repair expert.

When to Replace Your Bounce House

If the air leak still persists after you’ve tried the patch kit and called in a professional, it may be time to invest in a new bounce house.

How to Prevent Vinyl Tears in the First Place

Now that you know how to patch and repair your bounce house, you might want to know how to prevent rips and tears in the first place.

Do I need to Patch Everywhere that I feel Air Coming Out?

Air can escape from a bounce house in many different areas. Some of the most common are at seams where two pieces of material meet and through zippers. To be safe, you should patch any holes on your inflatable before inflating it to make sure no air escapes indoors!

How to fix a rip in a patch?

Apply adhesive to your patch and place it over the hole, smoothing out any air pockets with a roller or squeegee. Then once the glue has been applied generously over the entire area of rip (s), pressing together firmly.

Why do bounce houses fade?

The brilliant colors of a bounce house can fade after being exposed to the elements for too long. After they’ve lost their shine, it’s possible that your fun (and hopefully bouncy) inflatable is not going to be as much fun anymore! Fortunately, there are steps you can take in order to fix them up and get back on track with all things bouncing again.

How to puncture a bounce house?

Some people might even go so far as listening very carefully near where they think their kid has found something too big like rocks which could potentially puncture bounce house.

How to store inflatables in summer?

During the summer months, you will want to store your inflatable in a cool and dry location . Be sure not to expose it directly on an asphalt surface because that could cause damage from extreme heat. If possible, use something like plywood or concrete blocks as spacers between the ground and where you plan to put it down for storage during this time of year when temperatures are higher outside than inside most buildings.

How to fix a small tear in a drywall wall?

For larger holes, cover them with some tarp material that is cut into strips of appropriate size (approximately 2-3 inches wide). Secure on all sides by tying off each corner at the point where two pieces meet with thick string —make sure this isn’t too tight because air needs to flow through!

Can an inflatable balloon leak?

Air leaks that happen when an inflatable is being inflated may not seem like much. But if they’re left untreated then this could lead to problems with overinflation later on which will cause damage or even deflate the entire thing. It’s important for people who own these types of items to know what potential pitfalls their equipment has so that they can take measures accordingly – there might not always be someone around willing to offer up advice about how best to resolve such emergencies!

What does it mean when a part is sticking up?

Any part that is sticking up is a part that will not properly bond. Add more glue if need be, or, get a heavier object to press down upon the patched leak.

What to use to make bubbles last longer?

If all else fails, you’re going to want to turn to soap and water. Some folks recommend mixing in some glycerin, which is useful for retaining the effectiveness of the bubbles you’re about to create - using a detergent helps to lower water’s surface tension, which in turn enables bubbles to last longer.

How to get a patch to not stick?

First, make sure the patch is flat and not stuck to another piece of itself. After that, you have two choices . One, sit there and hold the pieces together for several minutes. Or two, find a heavy object and get it to do the job of maintaining an adequate amount of pressure on the patch site. Your choice.

What does it mean to listen for a leak?

Listening for a leak. Listening for the sound of air escaping is a bit impractical. There will invariably be noise that is out of your control, like a car driving by or the sounds of kids playing (and not on the bouncy castle you hold in your hands).

Do I need to Patch Everywhere that I feel Air Coming Out?

This is not the case. You bounce house will most likely always have air seeping through the seams and built-in pockets at the top for air to flow out. This is actually an amazing feature of your bounce house as the constant stream of air flow is what keeps it so strongly inflated while so many little bodies jump all over it. The continuous air flow is what makes it different from a balloon that could pop at any moment and essentially adds to the incredible durability of the inflatable.

How to repair a tear in a vinyl window?

This repair is done by gluing an extra piece of vinyl on the inside of the tear as described above and then puncturing precise holes through both pieces of vinyl. Make sure the area is completely cleaned and dry before starting the process. Using a curved needle and special string you essentially sew the tear together. When the hole is sewn, another patch of vinyl is glued on top. Similar to the repair described above, try to get every air pocket out so that the vinyl patch can seal securely. Because you will now have the sewn pieces under the repair, take your time to firmly press out any bubbles carefully with your fingers and press firmly around the bumps of the sewn tear.

How to fix a tear in vinyl patch?

Clean the area with a fast-drying alcohol swab and make sure it is dry before putting on the glue. Brush on the vinyl cement glue onto both the tear and the vinyl patch. Press the two together keeping it as flat as possible. Use a towel so that the glue does not get on your hands. Try to remove any air pockets.

How to repair a rip in a car?

Using a repair kit with the necessary materials, poke holes around the rip and sew the two sides together and then glue a vinyl patch on either side of the sewn tear.

Can duck tape be used on bounce houses?

It is not recommended to use Gorilla Tape or Duck Tape to repair a bounce house. Even if it is waterproof, these types of tape do not have much flexibility or elasticity to them so they will rub off and not last. They will also leave a sticky residue behind.

Do bounce houses have air pockets?

You bounce house will most likely always have air seeping through the seams and built-in pockets at the top for air to flow out . This is actually an amazing feature of your bounce house as the constant stream of air flow is what keeps it so strongly inflated while so many little bodies jump all over it.

Can mice get into a bounce house?

Make sure you have a thick bag protecting your bounce house and store it in a place where mice cannot get to it. -Don’t allow shoes or sharp objects on the bounce house. Hopefully, this is a common rule for your bounce house fun for the safety of the children, but it can also protect the bounce house as well.