Repairing Guides

how to repair hypalon

by Mr. Ariel Carter Published 3 years ago Updated 2 years ago
image

Hypalon Repair Instruction

  1. Cut the Pennel Orca® Tube Material patch to extend 2" from all sides of the damaged area. ...
  2. Trace the area of the patch on the damaged surface with a pencil.
  3. Using 180 grit sandpaper or a rasp, lightly buff the areas to be glued. ...
  4. Clean the buffed surfaces with a lint-free towel and Toluene. The Toluene removes any oils, protectants, and sanding particles.
  5. After the surfaces (damaged area on the boat and the underside of the patch) have thoroughly dried from the cleaning step, apply a very thin layer of Clifton ...
  6. After the first layer of glue is just tacky apply another very thin second layer of adhesive to both surfaces.
  7. Repeat Step 6, applying a third thin layer of adhesive to both surfaces. ...

Full Answer

Can Hypalon fabric be repaired or repaired?

- Hypalon Fabric - Small repairs and the addition of small accessories may be attempted by the owner if factory gluing instructions are followed closely.

How do I use Clifton Hypalon® adhesive?

After the surfaces (damaged area on the boat and the underside of the patch) have thoroughly dried from the cleaning step, apply a very thin layer of Clifton Hypalon® Adhesive to both surfaces, using a stiff bristle brush (the 4-ounce can of adhesive has a brush in the lid). Clifton Hypalon® Adhesive works well as a one-part glue.

What solvent can I use to repair Hypalon fabric gluing?

Hypalon Fabric Repair Procedures (PVC Fabric Gluing Instructions Here) Recommendedsolvent:The solvent used at the factories is called Toluene or Toluol. It is often available at paint, hardware or plumbing stores as a cleaning solvent. You can also use MEK (methyl ethyl ketone).

Can a quick patch repair fix my problem?

A quick patch repair may solve your problem for a short period of time, but we recommend you have it redone by a professional.

image

How do you fix Hypalon?

1:075:08How To: Patch a Hypalon Boat - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing you want to do for mechanical prep is to cut out a patch making it circular in nature.MoreFirst thing you want to do for mechanical prep is to cut out a patch making it circular in nature. And at least 2 inches in every direction from the hole.

How do you repair a Hypalon seam?

0:132:00Newport Vessels Inflatable Boat Slow Air Leak Seam Glueing RepairYouTubeStart of suggested clipEnd of suggested clipAnd you're going to use a tool a valve wrench anything like this to help force the adhesive into theMoreAnd you're going to use a tool a valve wrench anything like this to help force the adhesive into the seam. Once the layer has been applied let it sit for 20.

What is the best glue for Hypalon?

Clifton Hypalon® Adhesive FA4844 is your best choice for unsurpassed adhesion. We use it when building our Pennel Orca® boats and highly recommend it. For an even stronger bond and faster cure time, mix with Clifton Hypalon Accelerator, Item # 38702.01.

Can you repair Hypalon with PVC?

PVC Adhesive DOES stick to Hypalon Adhesive. Hypalon Adhesive DOES stick to Rubber. Simply priming the rubber components with Hypalon Adhesive will then allow a successful bond with PVC adhesive.

How do you repair an inflatable seam?

1:533:55Invisible Seam Repair on an Inflatable Toy - YouTubeYouTubeStart of suggested clipEnd of suggested clipAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of theMoreAround i push the vinyl of the toy down against the glue covered patch this squeezes out some of the vinyl cement. So i quickly reach for the paper towel to dab away the excess.

Can I use acetone instead of toluene?

acetone is a great cleaner for hypalon. i used it to clean a used boat i bought over the winter. i tried some test spots with toluene to compare it to the acetone, and the acetone worked way better, and it's not nearly as bad for you as toluene.

Can you use contact cement on Hypalon?

We still recommend the use of contact cement on hypalon, but we do include how to interface it with our adhesive so that PVC parts can be applied to it.

Will HH 66 work on Hypalon?

However, with proper preparation (including use of a mild abrasive and then cleaning the area thoroughly) HH-66 will work for adhering patches to Hypalon.

How long does Hypalon glue take to dry?

Brush onto the surface thinly, the surface should look wet. Allow the adhesive to dry for at least 30 minutes.

Does vinyl cement work on Hypalon?

If you end up totally stumped, go for the PVC glue. PVC glue will work on both PVC and Hypalon boats without any adverse reactions, the bond just won't be as strong on the Hypalon.

Does Gorilla glue work on inflatables?

If you joined the ranks of the disappointed floaters this summer, we've got some #GorillaTough news for you: Crystal Clear Gorilla Tape is perfect for repairing pool inflatables and pool covers.

Can you use super glue on inflatables?

0:061:45How to make a Quick Inflatable Boat Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipQuick easy fix is just common old superglue he's a gorilla glue elephant glue all those things youMoreQuick easy fix is just common old superglue he's a gorilla glue elephant glue all those things you can find from hardware shops and supermarkets.

What glue to use for air holding patch?

We recommend Clifton Hypalon Adhesive; it’s a great one-part glue for these materials. Mixing Clifton Hypalon Accelerator with the adhesive significantly increases bond strength and also shortens the cure time. We strongly recommend this combination when you’re making an air-holding patch.

What are the steps of a successful repair?

The three stages of a successful repair are mechanical, chemical and adhesive application. The mechanical is roughening the patch and boat with fine sandpaper to create more grip for the adhesive. Chemical prep is done with a solvent like toluene or acetone, to remove any substances that will interfere with the glue bond.

How to find a slow leak in a boat?

To find a leak, with the boat inflated, spray on a soapy water solution and look for bubbles. Sometimes really slow leaks won’t show up. To find them, make a solution of glycerin (found at pharmacies) and water; the higher tensile-strength bubbles can pinpoint the slow ones.

Can you repair a NRS boat?

You can do a professional-level repair job by following the step-by-step directions outlined here. This method works on an NRS boat made of Pennel Orca ® material, other makers’ Hypalon boats, or any of the other synthetic rubber boat materials.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9