- Cut two patches in a circular shape, using the patterned Intex patching material. ...
- Place a pea-sized drop of adhesive around the hole on both the inside and outside of the pool surface and on both patches. ...
- Apply one patch inside of the pool surface, smoothing the patch from the center to the outer edges. ...
- Allow the patched area to sit for 10 to 15 minutes, then repeat the smoothing process to ensure a tight bond.
How do you patch a hole in an Intex pool?
The patch should be cut from the clear patching material included with your Intex pool, if possible. Squeeze a pea-sized dollop of adhesive onto the patch, as well as on the surface of the ring surrounding the hole.
What are the pros and cons of an Intex swimming pool?
If possible, always use an Intex-brand patching kit to repair holes in the pool liner. Two of the biggest benefits of Intex swimming pools are that they're easy to set up and simple to maintain. These pools are constructed of a durable rubber material that stands up to the elements yet is lightweight enough for yearly set-up and take-down.
How do you level an Intex pool?
You may have to dig the ground first, so you can easily level the ground using the soil on it and either a concrete block or patio pavers. For framed Intex pools that are unlevel, you may put a block of wood or concrete underneath the legs of your Intex pool to level it. 6. Check if your Intex pool is leveled now:
Can I vacuum my Intex pool liner?
If your pool liner is on an uneven surface, it may have folds and wrinkles on it. These folds and wrinkles may get caught up when you clean your pool using your pool vacuum, and this may cause your liner to rip or tear apart. Even if Intex pools use strong and durable pool liners it is still suspect to damage if it is set on an unlevel ground.
Can you repair tear in above-ground pool?
You can patch a pool liner hole or tear above or below water. A dry patch might be an option if the water receded below the tear, for example, or if your pool has already been drained for other repairs or maintenance work. Warning: we strongly advise against draining your pool unless absolutely necessary.
Will Flex Seal tape work on vinyl pools?
1:164:00Flex Tape Test on Swimming Pool Leak - YouTubeYouTubeStart of suggested clipEnd of suggested clipI got a good and dry. And applied the patch. It seemed to grab on the outside of the pool pretty.MoreI got a good and dry. And applied the patch. It seemed to grab on the outside of the pool pretty. Well since I've locked the inside the water stops. So I was able to get this dry.
Can I use PVC glue on Intex pool?
pvc glue will work just fine.
Can you patch the bottom of an above-ground pool?
Yes, of course. Patching a pool with water in it is a simple process. The first thing you need to do is identify the area of the leak. Next, find a patch material that matches the shade of your current liner.
Will Gorilla tape patch a pool?
0:332:14Hole in Pool FIXED with Gorilla tape - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd this is what we used gorilla waterproof patch and seal tape. So it has like a little secondMoreAnd this is what we used gorilla waterproof patch and seal tape. So it has like a little second thing that's keeping it on here like a little layer.
What is the best vinyl pool patch?
It's best for smaller patch jobs because it tends to peel.Gorilla Crystal Clear Duct Tape. ... Boxer Adhesives Peel and Stick Vinyl Plastic Pool Patch. ... Vinyl Pool Liner Repair Kit. ... JED Pool Tools 35-249 Super Patch for Vinyl Swimming Pool Liner - 16 in. ... Vinyl Adhesive - 8 oz. ... Intex Wet Vinyl Plastic Repair Patch - 6 Count.
How do you fix a ripped inflatable pool?
0:473:29Fix Leaks inflatables Pools Rafts Towables Air mattresses EtcYouTubeStart of suggested clipEnd of suggested clipOut. Probably not I'll just take the shoe goo and the pool is actually usable if it's a small hole.MoreOut. Probably not I'll just take the shoe goo and the pool is actually usable if it's a small hole. Just like that this stuff is thick enough or something low pressure like this pool.
What kind of glue do you use to patch a pool liner?
If your vinyl pool liner needs patching, HH-66 Vinyl Cement is the answer. The world's most effective PVC vinyl adhesive is ideal for mending liner tears, spa covers, and most inflatable vinyl pool toys. It works underwater, sets in minutes, and holds fast even in extreme conditions.
What is the best PVC glue for pools?
Oatey® PVC 2300 Series Pool-Tite™ Medium Bodied Very Fast Set "Hot" Blue Cement is recommended for potable water, pressure pipe and DWV applications. It is formulated for wet conditions or situations involving fast installation or pressurization of flexible and rigid PVC pipe and fittings.
How do you fix a hole in the bottom of an Intex pool?
0:422:32Intex Above Ground Pool Liner Repair Kit Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipPatching the pool bottom is done in the same manner using the lighter weight bottom patch which hasMorePatching the pool bottom is done in the same manner using the lighter weight bottom patch which has a pattern on the top side. It is helpful to hold the patch down with a heavy flat weight.
How do you repair a tear in an above ground pool liner?
6:448:23Above Ground Pool Liner Leak Repair. Finding and Fixing the Hole.YouTubeStart of suggested clipEnd of suggested clipBy your hole. Open up your patch. Put the glue side down and hold it on there. Now you should onlyMoreBy your hole. Open up your patch. Put the glue side down and hold it on there. Now you should only have to hold it for maybe 10-15 seconds make sure the edges are down and your repair is complete.
How do I fix a hole in my above ground pool?
4:557:043 Ways to Fix-Repair-Patch Intex Above Ground Pool With Leak ...YouTubeStart of suggested clipEnd of suggested clipMove the putty in it's leaking again back in the pool. Okay I took the old putty off and put all newMoreMove the putty in it's leaking again back in the pool. Okay I took the old putty off and put all new putty to stop it leaking so I can patch it on the outside more of the story don't screw with it.
What is the best way to patch a vinyl pool?
1:296:40How to Patch your Swimming Pool Vinyl Liner! | The Ultimate PatchYouTubeStart of suggested clipEnd of suggested clipSo never cut your patches. Square. Always cut them round. And if for an example i have a hole hereMoreSo never cut your patches. Square. Always cut them round. And if for an example i have a hole here and i want to patch it all we want to do is cut the patch.
Does Flex Seal pool patch work?
5:1611:09Flex Seal Pool Patch and Repair tested. FLEX TAPE pool patch. [333]YouTubeStart of suggested clipEnd of suggested clipIt's been 24. Hours since we put our patches on i'll zoom in on them. This is the first patch that'sMoreIt's been 24. Hours since we put our patches on i'll zoom in on them. This is the first patch that's patched on the inside on the outside as you can see there's no leaks.
Can flex seal be used underwater?
A: YES, Flex Paste can be applied on dry or wet surfaces and even underwater. It won't dissolve or wash away and even dries underwater. For best results, apply a generous amount to the surface using firm pressure. It will help push the water out and allow better contact with the surface during application.
Will Flex Tape stop water leaks?
0:003:21News Does it really work Flex Tape, will it hold out the water - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's supposed to patch bond heal and repair almost any products other TV stations have tested it onMoreIt's supposed to patch bond heal and repair almost any products other TV stations have tested it on leaky pipes. And it held up we tried it on a bucket spilling out water and it worked.
What do you need to patch an Intex pool?
There will be a tool kit which comes with all intex pools bring it where you are patching the pool. You also need scissors for patching so, bring them too.
Does pool liner work for bigger holes?
Now if the above two methods are not working for you or your pool has the bigger hole then this way would be perfect for you. Pool liner works perfect for the pools which have larger holes because of its big sizes.
How long does it take to patch an Intex pool liner?
Fortunately, patching an Intex pool is an easy job that requires only a few supplies and 10 to 15 minutes of time. Intex makes patching kits designed specifically for their pool liners.
What are the benefits of Intex pools?
Two of the biggest benefits of Intex swimming pools are that they're easy to set up and simple to maintain. These pools are constructed of a durable rubber material that stands up to the elements yet is lightweight enough for yearly set-up and take-down. Advertisement.
How to patch a pool?
How to Patch Above the Water Line and Below the Inflatable Ring 1 Cut two patches in a circular shape, using the patterned Intex patching material. Cut the patch large enough so there will be an overlap of at least one-half inch around the hole. 2 Place a pea-sized drop of adhesive around the hole on both the inside and outside of the pool surface and on both patches. Use a cotton swab to spread the adhesive, covering the entire patching area. Allow the adhesive to sit for 10 minutes so it can cure. 3 Apply one patch inside of the pool surface, smoothing the patch from the center to the outer edges. Repeat the process with the second patch on the outside of the pool surface. 4 Allow the patched area to sit for 10 to 15 minutes, then repeat the smoothing process to ensure a tight bond.
How to fix a hole in a ring?
Squeeze a pea-sized dollop of adhesive onto the patch, as well as on the surface of the ring surrounding the hole. Allow the adhesive to cure for 10 minutes before applying . Place the patch over the damaged area and smooth it down, starting in the center of the patch and working toward the edges.
How long does it take for a patch to cure?
Allow the adhesive to cure for 10 minutes, then immerse the patch into the water while still folded.
How to patch a hole in an inflatable ring?
How to Patching a Hole in the Inflatable Ring. Inflate the upper ring fully, using an air pump. This will help you locate the hole. Mark the hole with a permanent marker so it is easy to find. Cut a circular patch to cover the hole, allowing for an overlap of at least one inch around the damaged area.
Does Intex make pool liner repair kits?
Intex makes patching kits designed specifically for their pool liners. Other, off- brand pool liner repair kits will also work, though the patches may not perfectly match the pattern of your Intex liner. If possible, use an Intex patching kit with the patching fabric that came with your pool. Things You'll Need.
What is Intex pool?
Intex is a highly trusted and respected name in the pool supply industry. It offers an excellent line of above-ground pools that are affordable and very easy to install yet solidly constructed. If you are considering the purchase of an ...
Why is my Intex pool rip apart?
These folds and wrinkles may get caught up when you clean your pool using your pool vacuum, and this may cause your liner to rip or tear apart.
How to check if Intex pool is leveled?
Check if your Intex pool is leveled now: Now that you have put the blocks underneath your Intex pool, verify if it is properly leveled before refilling it with water. Check if there is any difference between the water levels of your swimming pool. Go around your pool to check each side.
What is included in Intex above ground pool?
Many Intex above ground pools come with complete equipment and accessories such as ground and pool covers, ladders, filter pumps, surface skimmers and pool vacuums. Intex above ground pools also come with an instructional DVD for even greater convenience and to make the assembly process as straightforward as possible.
How much water should I drain from my Intex pool?
Drain your pool: If your Intex pool is unlevel by more than 3 inches, I suggest draining the whole pool. If it’s only by a few inches or is less than 2 inches, you may drain only half the water on your Intex pool.
What is the best material to level the ground for an above ground pool?
Usually, it is made either of polyurethane or polystyrene, solid foam features a varying thickness.
Can you swim on an unlevel Intex pool?
For those who don’t have kids using their above ground pool, you may opt to swim on an unlevel Intex pool. Hopefully, your pool will hold. It’s a risk you can take. But for those with kids using their Intex pool, we recommend leveling the ground for your Intex pool for their safety.
How Unlevel Can an Intex Pool Be?
There’s no official word from Intex on how unlevel their pools can be, but the industry standard for most above-ground pools is this:
How Do You Measure the Level of an Intex Pool?
You can usually tell when an Intex pool isn’t level because it will have a noticeable slant or lean, resulting in the water level being uneven.
Why Is Being Level Important?
Besides being an eyesore, there are a few complications that come from resting your Intex pool on uneven ground, such as:
How To Level the Ground for an Intex Pool (3 Options)
To fix a sagging, sinking, or leaning pool, you’ll either need to move it to level ground or create the level ground. This section will answer the following questions across multiple methods:
