Repairing Guides

how to repair jeans back pocket

by Burdette Moore Published 3 years ago Updated 2 years ago
image

How to fix a ripped back pocket of jeans

  1. How to fix a ripped back pocket of jeans. Pin down the ripped portion of the jeans back pocket. ...
  2. Thread the needle with the polyester thread. Use about an arms length of thread to ensure that you have enough to sew with.
  3. Cut the ends of the thread.
  4. Tie a double knot at the end of the two threads.
  5. Start to sew from the bottom of the pocket up.
  6. Remove pins as the needle and thread approaches the pins.
  7. Loop the needle through the thread to tie a knot to end and secure the sewing.
  8. Cut the loose threads to clean up the sewing. Almost done! To reassemble your device, follow these instructions in reverse order.

Steps to Repair Pocket Hole
  1. Prepare the Area. If there are any loose threads or frayed edges around the hole, you want to clip those off.
  2. Cut the Patch. Use one-sided fusible interfacing or a scrap of lightweight fabric as a patch. ...
  3. Attach the Patch. ...
  4. Sew the Patch. ...
  5. Finish Up.
Feb 16, 2021

How to fix torn jeans pockets?

Supplies to Fix Hole

  • fusible interfacing or scrap fabric for the patch
  • needles for hand sewing
  • thread
  • marking pen that’s removable (like FriXion pen)
  • iron and board
  • scissors or embroidery snips

How to fix holes where the jeans meet the pockets?

Sew New Pockets in Jeans

  1. Assess Damage. First step is to turn your jeans inside out and assess the damage. ...
  2. Mark Existing Pocket + Remove. Lie the pocket flat and mark on where you want to cut. ...
  3. Transfer Dimensions + Cut. Fold your donor fabric in half (pattern/texture side in) and place flat on a table. ...
  4. Sew New Pocket to Jeans. ...
  5. Clean Up + Wear! ...

How to patch jeans pocket?

Step By Step Process:

  • Step-1: Cut the Patch. To know how to fix ripped jeans, you have to know how to cut the patch perfectly. ...
  • Step-2: Perfect Shape. When you are about to sew a hole, covering the hole can be critical. ...
  • Step-3: Glue it. ...
  • Step-4: Overlap the Hole. ...
  • Step-5: Size of the Patch. ...
  • Step-6: Pre-Heat Iron. ...
  • Step-7: Iron-on Patches for Jeans. ...

How to repair ripped jeans 3 ways?

Tips To Fix Your Ripped Jeans And Make It Awesome Again

  • Attach Patches With Different Shapes. Ripped jeans are the best way to kindle your creativity and make your jeans attractive. ...
  • Do The Embroidery Stitching. If you have several holes in your jeans, you can try embroidery stitching. ...
  • Use Drawing Stitches To Cover The Ripped Area. ...
  • Patch It With Lace. ...
  • Cut Away The Portion And Patch It With Fabric. ...

image

Why do my jeans keep ripping at the back pocket?

The back pockets of denim jeans are prone to wearing out at the top corners with use. If that's where you carry your phone or wallet, you'll almost certainly develop holes at those stress points long before the rest of the jeans are worn out. Luckily, repairing a back pocket is a pretty simple fix.

How do you sew a ripped back pocket?

Trim around the edge of the hole.Cut the fabric into a patch. ... Place the patch inside the back pocket.Pin the patch into place, making sure the pins only catch the outer pocket fabric and the patch fabric.Thread both ends of the thread through a needle, leaving a loop on one side.More items...

How do you sew a back pocket in jeans?

1:056:07How to Sew Jeans Back Pockets: Easy Step-by-Step Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd what to do is that it was so one or two rows of stitching at the opening of the pocket. Start byMoreAnd what to do is that it was so one or two rows of stitching at the opening of the pocket. Start by stitching the lever row since this will keep the pocket fold in place.

What do you call the pocket on the back of a jeans?

It's known as the coin pocket, the watch pocket, or the match pocket. And lastly, you have two stitched-on and pointed back pockets. Actually, jeans originally had only four pockets. It's a common misunderstanding that the coin pocket is the fifth pocket.

Do iron on Jean patches work?

0:041:11How to Fix Ripped Jeans with Iron-On Patches - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you can wash your jeans as needed ripped your belt loop while putting on your jeans. Simply cutMoreSo you can wash your jeans as needed ripped your belt loop while putting on your jeans. Simply cut an iron-on patch down to about double the size of the hole iron it on and using a needle and thread.

How do you fix a hole in your pocket?

0:147:21How to Repair Holes in Pant Pocket - DIY Add New half Pocket - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith your two pieces of fabric. Together place the cutout pocket piece onto it so that the outerMoreWith your two pieces of fabric. Together place the cutout pocket piece onto it so that the outer edge is parallel to the outer edge of the fabric. And then pin it down in place.

How can I fix my jeans without a sewing machine?

1:063:15How to Patch Jeans Without a Sewing Machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipThread your needle with a double strand of thread and tie knot on one. End. Then place the smallerMoreThread your needle with a double strand of thread and tie knot on one. End. Then place the smaller piece of fabric behind the hole so it's fully covered and pin in place.

How can I fix a hole in my jeans without sewing?

1:395:09How to fix torn jeans (no sewing) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst I'm to turn the jeans inside out I like to put plastic bags. Inside the legs to prevent theMoreFirst I'm to turn the jeans inside out I like to put plastic bags. Inside the legs to prevent the glue to go through and stick to the back side of the leg.

How do I patch the inside of my jeans?

First, apply fabric mending tape under the damaged area using heat from an iron. Then, using thread that matches your torn jeans, sew an overcast stitch over the rip's edges. Trim off any excess fabric from the fabric mending tape on the inside of the jeans. Use darning stitches.

How do you put a rivet back on jeans?

3:047:59How to install jeans hardware at home (including rivets & jeans buttons!)YouTubeStart of suggested clipEnd of suggested clipI'm going to use my fingers. And just make sure that that rivet post is going straight down and I'mMoreI'm going to use my fingers. And just make sure that that rivet post is going straight down and I'm going to give it a couple taps. Make sure it's on and then. And that's it your rivets installed.

What are back patch pockets?

A patch pocket is a pocket that is placed onto a piece of fabric and sewn into place. They are one of the easiest types of pockets to sew and add to a garment, whether something you are sewing from scratch or an up-cycling project.

How do you sew a pocket flap on a patch?

0:058:24How to Sew Patch Pockets & Pocket Flaps - YouTubeYouTubeStart of suggested clipEnd of suggested clipUnder half image towards the inside. And then you are going to turn it with on those little nipsMoreUnder half image towards the inside. And then you are going to turn it with on those little nips that you made right there and right there.

What is a torn pocket?

A Torn Pocket is a request found during Chapter 4 of Tokyo Mirage Sessions #FE. Across the street from Illusory Shibuya is an Upset Girl. She lost her Stamp Cards, which she needs to get a Curine Doll. She had them, but realized a pocket had torn.

How do you replace a jacket pocket?

How to Replace a Coat PocketRemove the old pocket. Turn the coat pocket inside-out, then use a seam ripper and thread scissors to completely remove the old pocket. ... Measure the new pocket. ... Sew the new pocket. ... Attach the new pocket to the coat.

How to keep jeans from fraying?

To retain the aesthetic of your jeans, cut away any parts which are frayed and looking rough. Next, although it’s tempting to cut the whole pocket off, flatten the pocket out and make a line to cut out slightly away from where the pocket meets the jeans.

What to put on jeans to make them look good?

Add studs, beads or pearls. Add some personality to your jeans and make them yours with some stylish studs, beads or pearls. All that’s required for this look is a hot glue gun, some pliers, scissors, the accessory of your choice and some fabric.

How much thread do you need to sew a tear?

Tears. For smaller tears, again you’ll need 20 inches plus of thread to do the job. Tie a knot in the same place as for holes, as far away from the needle as possible. Pinching the edges of the torn areas together, start to sew, ensuring that any frayed or damaged parts are on the inside.

How to make a pattern on jeans?

Get some bleach, paintbrushes, a bowl, some rubber gloves and a printed pattern of your choice. Using the gloves, grab your brush and paint the pattern onto the jeans with bleach, using the printed pattern for reference. After approximately 20 minutes, go over it again filling in the gaps.

Where is the rip on jeans?

There’s a rip on the inner edge. If the rip is located on the inner edge of the pocket , that is to say between the area closest to you when you are wearing the jeans, then again you’ll need to replace the whole pocket. The material can be quite delicate, especially after extended use, so any attempt to fix this area up will likely result in ...

Can you fix a rip in a pocket?

There’s a rip on the outer edge. If you see that the rip is only confined to the outer edge of your pocket, that’s generally good news for you. You can easily fix this kind of tear with some tidy sewing, closing up the hole with a larger seam of a similar color than the pocket.

Can you hand stitch a pocket?

While a sewing machine certainly helps make the job easier, you can also pull this off by hand stitching with a needle and thread.

Introduction

Use this guide to help you repair your ripped back pocket in your jeans.

Step 7

Loop the needle through the thread to tie a knot to end and secure the sewing.

Ripped Back Pocket Seam Repair

Install the proper gauge needle into your sewing machine. Make sure the needle has a stiff shank and sharp point. Use a size 10/70 up to a size 18/110 needle. These needles are made to sew through stiff, heavy fabric in several layers. It is commonly referred to as a denim needle.

Repairing a Rip Through the Center of the Pocket

Decide which repair you want: removal of the pocket and repair, or repair without removing the pocket but losing the use of the pocket. If you just fix the rip, it’s easier, but the pocket will be sewn closed. To remove the pocket proceed to the next step.

How to secure patch to pocket?

Securing the patch to the pocket. If you’re using an iron-on product, iron it on to cover the hole from the inside according to the manufacturer’s instructions. For sewn-in patches, baste in patch to keep it from shifting. Patches ironed in place on the inside of the jeans.

How to reinforce iron on patch?

Regardless of whether you chose an iron-on or sew-in patch, you need to reinforce the patch by sewing a strong row of stitches around the edges. For a less visible patch, I like to sew a square of stitching around the hole, making sure to include the corner of the pocket in the square. I sew over the square a few times to reinforce.

Do jeans wear out at the top?

The back pockets of denim jeans are prone to wearing out at the top corners with use. If that’s where you carry your phone or wallet, you’ll almost certainly develop holes at those stress points long before the rest of the jeans are worn out. Luckily, repairing a back pocket is a pretty simple fix.

How to tell if jeans are wearing down?

Looking at your jeans from the inside-out is a good way to determine where holes are forming. The fuzzy blue parts are warp yarns that are starting to fray. Nothing to get alarmed about – it’s just a sign of your jeans wearing down.

How long should a crotch last?

On the other hand, the crotch is the highest stress point and wearing it 7 days a week for an entire year is going to wear it out sooner. More importantly –.

How to cover a hole in a wall?

Go from the top to the bottom of the hole from side to side until you reach your desired amount of coverage. Left: offending hole; right: zigzag from top to the bottom of the hole until you reach the other end. Left: zigzag in the reverse direction to the other side; Right: Keep going until you cover the hole.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9