Fix Your Kenmore Stack Washer
- What Went Wrong... To give a little background this washer was making loud banging sounds as it ran (see the video above.)
- Open Wide! There are 2 screws on the bottom of the front panel. ...
- Here's the Problem. Looking under the drum I could clearly see that the belt was damaged. ...
- Replacing the Belt. ...
- It's Fixed!! ...
Full Answer
How to fix a Kenmore washer that stinks?
- Combine 1/4 cup of water with 1/4 cup of baking soda; pour into the soap dispenser
- Pour two cups of white vinegar into your empty washing machine
- Run a hot wash cycle
How do you clean a Kenmore Elite washer?
- Put on a pair of rubber gloves. Add 3/4 cup of bleach and 1 gallon of hot water to a bucket.
- Turn the empty washer on the hottest, longest setting available.
- Open the washer door when the cycle has finished.
How to drain a Kenmore washer manually?
Symptoms of a washer with a drain problem are:
- The cycle ends and the tub is still full of water.
- Faint humming sound from stuck impeller when the washer is set for drain/spin.
- The cycle ends and the clothes are sopping wet.
- Error code displays. All these codes mean no drain: OE, LD, ND.
- The washer won't spin. It can't when it's full of water.
How to replace water valve in Kenmore washer?
How to Replace the Water Inlet Valve on a Kenmore Elite
- Unplug your Kenmore Elite washing machine. Turn off the water valves supplying water to the washer.
- Label the hot and cold water supply hoses with tape before you remove them from the rear of the washer, if necessary.
- Remove the cabinet from your top-loading Kenmore Elite. ...
- Find the blue water inlet valve attached to the rear panel of your washer. ...
Is it worth repairing a Kenmore washing machine?
As a general rule, if it costs less than 50% of the price of a new washing machine to repair your old one, you should choose the repair option. But, you should also consider whether or not there is a warranty coverage on your washer and think about economic realities.
How do I service my Kenmore washing machine?
0:1913:44Kenmore Top-Load Washer Disassembly (11022932100 ...YouTubeStart of suggested clipEnd of suggested clipAnd shut off the water supply valves. To make it easier to move the appliance remove the hot andMoreAnd shut off the water supply valves. To make it easier to move the appliance remove the hot and cold water supply lines from the inlet valve be prepared for some water to spill. Out.
What would cause a Kenmore washer not to spin?
If the clutch is worn out, it may prevent the tub from spinning. If the clutch band kit is worn out, replace it. The drive pulley connects to the washer drum and works with the drive belt and motor to rotate the drum. If the drive pulley is worn out, the drive belt might slip off, preventing the washer from spinning.
How do you fix a Kenmore washer that won't start?
If Your Washing Cycle Won't Start, Check the Lid Switch in Your Kenmore Washer. If your washer won't start or progress through the cycle, check the washer lid switch lid. When your appliance doesn't think the lid is properly shut, it won't start the next step in the washing cycle.
How do you run a diagnostic test on a Kenmore washer?
3 AnswersWith the washer empty, close the door.Push “control/on” or “Start”Select “Drain/Spin”Select “No Spin” by pressing SPIN SPEED touchpad.Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)C:00 should light up and begin the diagnostic.
How do you reset a Kenmore washing machine?
How to Reset a Kenmore Elite HE WasherPress the "Stop" button twice, and then press the "Power" button. Video of the Day. ... Choose a wash cycle (e.g. "Normal"), and then choose your wash options (e.g. "Hot/Cold" or "Cold/Cold").Press the "Start" button to complete the reset process and restart the washing machine.
What would cause my washer not to spin?
The drainage is poor Normally, your washing machine won't go into a spin cycle until it's been drained. The drainage hose may become clogged with debris from your clothing, or it could be kinked. If the hose is kinked or crushed, it will likely need to be replaced.
Why is my washer not spinning all the water out of my clothes?
The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.
Is there a fuse in a Kenmore washing machine?
Washing machines have fuses that protect them from power surges. Washing machines require lots of power to run.
How old is my Kenmore washer?
Locate the serial number on a Kenmore washer made by Whirlpool. The second letter of the serial number identifies the year the machine was manufactured. For instance, “L” represents 2001, “M” means 2002 and, continuing through the alphabet, “Y” means 2009.
Why is my Kenmore washer shaking?
Common solutions for: Kenmore Washer vibrating or shaking. One or more of the shock absorbers might be broken or worn out. The shock absorbers dampen the vibration of the washer tub. If one or more of the shock absorbers are worn out, the washer will vibrate or shake.
How do I remove the top of my Kenmore washer?
0:463:22Disassemble Whirlpool/Kenmore Direct Drive Washer - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey have spring clips. They have to slip a putty knife underneath to release them. Once you haveMoreThey have spring clips. They have to slip a putty knife underneath to release them. Once you have your screws out slide the control panel forward about 1/2 an inch.
How old is my appliance Kenmore?
To determine the age of your appliance, use your serial number (not model number) to find date of manufacture. Kenmore serial numbers begin with two letters followed by six numbers. The 2 letters at the beginning of the serial number tell you the month and year it was made.
Who owns Kenmore washing machines?
Background and Identification. Kenmore Washing Machines is a household appliances brand, which is owned by the American company Transform Holdco. They sell most of their appliances at Sears, Kmart and Amazon.
Who makes Kenmore washers?
Kenmore Washing Machines is a household appliances brand, which is owned by the American company Transform Holdco. They sell most of their appliances at Sears, Kmart and Amazon. They are produced by several companies including Whirlpool, LG, Electrolux, Panasonic, Cleva North America and Daewoo Electronics.
Is Kenmore a reliable washer?
Kenmore has an upmarket line called the Elite line as well as a professional line of washers called Kenmore Pro.
Does Whirlpool make Kenmore washers?
Whirlpool continues to make Kenmore brand washers for Sears. The Whirlpool Kenmore top-load machines had some specific features they created. One was called the “wig wag” mechanism. It was used for years until more modern features replaced it. The mechanism is an oscillating piece mounted next to two solenoids.
Why won't my Kenmore washer spin?
Your Kenmore washer will not spin if the lid switch is faulty. This is a safety feature, to prevent accidents when somebody wants to stick his hand while washer is spinning. To check this you’ll use a multimeter to check for continuity in the switch. If there is none, replace the switch.
What is a coin trap on a Kenmore washer?
Coin Trap or Filter. Some Kenmore washers feature coin traps to catch small objects before they reach the pump. This part needs to be clean and free of debris to ensure your washer is draining correctly. Simply remove the trap and thoroughly clean it.
Why is my washer loud?
Drive Pulley. When the drive pulley becomes cracked, bent, loose, or worn out it can make your washer loud. You’ll need to remove it from the machine and inspect it. If you notice that it’s defective or damaged, it will need to be replaced.
Why is my washer making a loud noise?
Clutch. Aside from making the washer not spin, a failing clutch can also make the machine loud during or just after the spin cycle. A failing clutch will make grinding metal to metal noise. Again, this part cannot be fixed, so you’ll need to repair it.
Why is it important to replace shock absorbers on a washer?
They are important as they prevent the washer from shaking and vibrating. Locate the shock absorbers on your machine and check them for damage. If you find that one is damaged, replace it. Also keep in mind that when you replace one you should consider replacing them all to ensure they get equal wear.
Is Kenmore a good washer?
Kenmore washers are popular among consumers and for good reason. They are relatively reliable machines, but at the same time have their own problems. The good news is that when they do have problems it’s generally easy enough to fix yourself.
