how to repair laptop headphone jack

Full Answer

Why is my headphone jack not working on my laptop?

The Reason the Headphone Jack is not Working

• The headphone is not plugged correctly
• You have muted the headphone
• Broken headphone
• The headset is not your default playback device
• Incorrect format of audio
• Issues with the IDT audio device
• Unclean headphone jack

How to fix audio jack not working on laptop?

Quick Navigation :

• Fix 1. Enable Front Panel Jack Detection
• Fix 2. Set the Required Audio Device as Default
• Fix 3. Update or Reinstall Your Audio Device Driver
• Fix 4. Connect the Audio Jack to the Back of Your Computer
• User Comments

How do I Fix my headphone port on my laptop?

You can:

• Clean the headphone jack.
• Adjust the headphone plug.
• Repair the headphone jack.

Is your laptop not recognizing headphones?

Why is My Computer Not Recognizing Headphones?

• Physical damage in cables or headphone
• Computer 3.5mm port damaged
• Outdated driver or windows
• Desired output devices not selected or disabled
• Physical scroll or switches on a headphone
• Loose front panel connectors
• The dust settled on port

Can headphone jack be repaired?

Conclusion. Just like when fixing the headphone wires, fixing a loose headphone jack only involves a quick, simple fix that doesn't risk damaging your device. In case you need to open your device, you need to make sure you're fully aware of the risks involved.

How do I fix my headphone jack port?

0:343:44How to fix headphone jacks and charging ports... with a toothpick?YouTubeStart of suggested clipEnd of suggested clipNow all we're gonna do is grab our toothpick. And we're going to gently. Scrape. Around the insideMoreNow all we're gonna do is grab our toothpick. And we're going to gently. Scrape. Around the inside of firstly our headphone jack here if your phone or your device has a headphone jack.

How much does it cost to fix a laptop audio jack?

The cost of just the hardware is approximately around 100 INR(generic, perfect fit) or 350 INR (OEM based). Labor charge could go all the way from 50 INR to 500 INR depending the kind of guy or shop you are dealing in/with. So, the total and maximum cost would be around 850 INR.

How do I know if my headphone jack is broken on my laptop?

If your Laptop headphone jack not working, you can try to disable Front Panel Jack detection. Go to Control Panel > Relatek HD audio Manager. Then, you check the Disable front panel jack detection option, under connector settings in the right side panel. The headphones and other audio devices work without any issues.

Why is my laptop headphone jack not working?

Please click “search“> type Device Manager>Sound, video, and game controllers, then right-click on your audio driver and select update driver. This will help you troubleshoot the problem, and hopefully, your headphones will start working.

Can 3.5 mm jack be repaired?

What Do You Need to Fix a Broken 3.5mm Headphone Jack? You will need a few tools to make a headphone jack repair. A soldering iron, heat gun, and a set of wire cutters/strippers will make the job much easier. Alongside this, you also need some consumable parts.

How do I clean my laptop audio jack?

Using cotton swabsPrepare the cotton swabs / q-tip with some rubbing alcohol. Use swabs with thinner tips (less fluffy) as they're easier to fit into the jack. ... Repeat step 3 with a lightly dampened cotton bud with rubbing alcohol.Remove the cotton swab and repeat with a dry one to remove excess moisture.

Why are my headphones not working when I plug them in?

Make sure that the drivers for your audio card are properly installed. Also, and I know this sounds stupid, but make sure that your headphones are properly plugged in to the headphone jack, not the mic etc. If that still won't work, check the bios to make sure that your audio card is properly initialized.

Can a laptop headphone jack be replaced?

The jack port is soldered to the motherboard in most cases and require a motherboard replacement or a smaller daughter board replacement. If your laptop is out of warranty and more than 2 years old, this type of repair would most likely be more than buying a new laptop. /cheers.

How to fix headphones not working on laptop?

1. Try to plug in another pair of headphones into your laptop and see if it starts working. If it does work, then your previous headphones are to blame. 2. If the other pair of headphones does not work either, then it is not a headphone problem.

Why is my headphone jack not working?

An out-of-date or misfit audio driver can lead to the issue of laptop headphone jack not working. In that case, you do not have to go through the complexities of manually selecting and updating your laptop’s audio driver.

How to turn up volume on headphones on laptop?

1. Click on the sound icon on the far right of the lower side of your laptop screen. Then unmute the headphones by clicking on the speaker icon. 2. If the headphones are not already mute then simply turn up the volume by moving the volume slider to the right.

How to turn on headphones on Windows 10?

Here is how you can do this: 1. Go to your taskbar and right click once on the sound icon. From there select the sounds tab when a new list appears. 2. Go to the Playback tab and then right-click on your headphone device icon and select the enable option. This should solve your problem particularly if you are using Windows 10.

How to select a default device for laptop?

Here is how you can do this: 1. Go to your taskbar and right click once on the sound icon.

What color are headphones jacks?

Usually, the headphone jacks are color coded as green, or the jacks have a headphone symbol on them. You can easily recognize the correct headphone jack and plug in the headphone properly to enjoy listening through your headphones.

Can a laptop audio board be faulty?

Laptop’s audio board can be faulty too, and if all the above methods do not work for you, then this is most likely the problem at hand. Most laptops have an audio board referred to as the Daughter board which is separate from the motherboard. You can replace the audio board to solve the problem for once and all.

How to fix a headphone jack that is too small?

Cut a thin strip of aluminum. Wrap it around the base of the headphone plug until it’s thick enough to make it fit into the audio jack. This is a temporary solution you can use if your headphone plug is smaller than the jack. If you want a more permanent fix, you may have to get a new pair of headphones.

How to clean a headphone jack?

Tap the brush so that it’s moist but not soaking wet. Insert the brush into the headphone jack with your device turned off. Move the brush up, down, and in circles. You have to do this a few times to make sure the jack is thoroughly clean. Wait for at least an hour to let the headphone jack dry.

How to get debris out of headphone jack?

Wrap the edge of the paper clip with double-sided tape. Carefully insert the sticky end into the headphone jack. Press the paper clip tightly to the bottom of the jack and twist. This will get the debris to stick to the tape. Repeat the steps, checking regularly into the jack to make sure no debris is left.

Why is my headphone jack corroded?

Corrosion of the headphone plug or jack can also cause size changes. Corrosion happens because of exposure to moisture. If the plug or jack shows some rust or discoloration, it’s likely corroded. If that’s the case, it may be time to get new headphones or give the headphone jack a good cleaning.

Why is my headphone plug not clicking?

Dust, dirt, or even lint collecting inside the headphone jack can prevent the plug from clicking in. Get a flashlight and shine it into the jack to make sure it’s free from clogged up debris.

What to use if a drill bit doesn't work?

If it doesn’t work: Use a toothpick instead of a paper clip. If you have a 1/16-inch drill bit, you can use that too. The shape of the drill bit can make it easier to pick up the debris than a toothpick or a paper clip. Do not attach the drill bit into a drill or you may permanently damage your device.

What does it mean when you peered into a jack?

If you peered into the jack and found debris, it’s a good sign. It means you may not have to repair or replace the jack at all. You simply need to clean it.

How to fix headphones not working on Windows 10?

Use any of the methods below to start working on the issue with your headphones or the headphone jack on Windows 10. Method 1. Plug your headphone in and restart your computer. While your computer is still powered on, plug your headphones into the headphone jack. Wait for a few seconds before restarting your computer: ...

Why won't my headphones work?

Physical damage. If your headphones or the headphone jack is damaged, it’s most likely not going to work. Examine both and see if there’s any physical harm on the devices that could interfere with its functions. Software error.

Compare with other headphones

If you cannot hear or receive calls from your phone’s ear speakers, you should first try inserting a headset into the 3.5mm port to see if the headphones can be heard. If the headphones jack is not working, take them out and check that they are not leaking.

Foreign particles in the headphone jack can cause earpiece problems

If the first step fails, you can check the jack port (where wired headphones are usually inserted) to see if it is dirty or has foreign particles.

Restart your device

Hardware problems can cause the earphones to stop working properly, but software errors can also cause a pair of headphones to stop working.

Be sure to check for sizes differences

Factory defects or wear and tear from extended use can cause small changes in the size of the plug that could affect the fit inside the jack. You may also find that the audio jack has been damaged by misuse. If the headphone jack size is different, you can choose a different headset or a Bluetooth headset.

Verify that there are no liquids in the Jack

The system can be fooled by a small drop of liquid in the jack, and the headset jack may stop working. You will need to clean the jack with a soft tissue gently.

For Pc

This could be caused by an outdated or incorrect audio driver. To resolve the problem, you will need to update your audio driver.

What to do if your headphone jack stops working?

If the headphone jack on your laptop stops functioning, your best option is getting a USB to headphone jack dongle or some bluetooth headphones (if your laptop has bluetooth.) The jack port is soldered to the motherboard in most cases and require a motherboard replacement or a smaller daughter board replacement.

Can you solder a jack into a logic board?

You could solder a new or used jack into logic board or small board connected by ribbon as most Jacks are the same unless they have video output as well as audio. Can take a jack from nearly any device as long as the holes match up to the motherboard and can do with smal. Continue Reading.

Ball Pen Ink Tube

Ball pen ink is the same as a headphone jack. You can take any ball pen which is low in cost. You need to search for that pen that would be getting it into that space.

Use Paperclip or Toothpick with Glue

Ball pen tube doesn’t work then go with this option of using a paperclip or toothpick with glue to bring out that broken jack from the laptop.

Grip Stick To Remove The Broken Jack

Grip stick is a tool that is designed by professionals for the removal of the headphone jack from your laptop jack.

Tips to Prevent the Jack from Breaking

Avoid buying low-quality headphones You should always prefer buying high-quality headphones because cheap products fall apart very easily and more quickly than high-quality headphones.

Final Words

We hope that we have provided you with first-hand information to remove that broken jack and these steps help you to save your money and precious time. By following these steps, you can once again listen to music, watch videos on your laptop without any problem.