how to repair large drywall holes

Fix Large Holes

1. Cut Out a Piece of Drywall to Use as the Patch. Cut a piece of drywall into a square a little bit bigger than the hole.
2. Trace the Patch Size Over the Hole
3. Cut Out the Hole
4. Attach Furring Strips Inside the Hole
5. Attach the Patch to Furring Strips
6. Apply Joint Tape to the Patch
7. Apply Joint Compound. ...

Full Answer

What tools are needed to fix a hole in drywall?

Other Tools That Are Nice to Have:

• Keyhole Saw
• Drywall Screw Gun
• Cordless Drill
• Drywall T square
• Rasp
• RotoZip ®
• Ten Inch Drywall Knife
• Halogen Light
• Sanding Pole

How to finish drywall in 9 steps?

Instructions

• Prepare the Surface. ...
• Apply the First Mud Coat (Paper Tape) If you are using paper tape, it must be embedded in a layer of compound, and thus the process takes slightly longer than ...
• Apply the First Mud Coat (Fiberglass Tape) Fiberglass-mesh tape is self-adhesive and can be applied directly to the drywall seams without first applying a layer of mud.

More items...

How much does drywall repair cost for small holes?

To estimate costs for your project:

1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased.
2. Specify Project Size and Options Enter the number of "items" required for the project.
3. Re-calculate Click the "Update" button.

How to patch small holes in drywall?

Attach a small piece of wood, known as a furring strip, vertically inside the cut-out hole using a drill and drywall screws. Screw the furring strips into the existing drywall. Between the two existing studs and the furring strip, the new drywall will have plenty of support to avoid cracking.

How do you fix an extra large hole in drywall?

2:286:57How to patch and repair drywall - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut a square in the wall around the hole drywall can be found in two by two foot pieces. So weMoreCut a square in the wall around the hole drywall can be found in two by two foot pieces. So we traced that and cut a 2 by 2 foot square. If your hole is smaller cut down your drywall piece to fit use

How do you fix a 6 inch hole in drywall?

2:5815:38How to Fix Holes in Drywall - 4 Easy Methods - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's option number one for your first coat option number two is what's called the presto patchMoreSo that's option number one for your first coat option number two is what's called the presto patch the presto patch is a really simple idea basically it's a four inch circle of half inch drywall.

How do you fix deep gouge in drywall?

A large gouge or hole may require a patch larger than those available. Make your own patch by cutting a piece of scrap drywall to fit inside the hole. Spread a thin layer of compound around the hole, then attach the patch in place with drywall tape, then spackle over it as you would a regular patch.

How do I fix a large hole in the wall?

2:466:41Fixing Large Holes in Walls - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's a two-step process first you want to score the paper on the top surface with a utility knifeMoreIt's a two-step process first you want to score the paper on the top surface with a utility knife snap it and then cut the paper on the back. Side snap it and then cut the paper on the back.

How big of a drywall hole can I patch?

6 inchesFor holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

What is a California patch?

0:182:15How To Repair a Drywall Hole Using the California Patch - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe no cladding patch is known in some areas as the California patch. It doesn't require a backing.MoreThe no cladding patch is known in some areas as the California patch. It doesn't require a backing. And it works great for holes approximately.

How do you fill a drywall gouge?

0:013:12How to Patch Drywall | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor small holes and dents use a putty knife or your finger to fill the hole with lightweight.MoreFor small holes and dents use a putty knife or your finger to fill the hole with lightweight. Spackling.

How do you spackle a large area?

1:3811:17How to Spackle a Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow you'll want to put a big glob of speckle onto the screw. And completely fill the space next you'MoreNow you'll want to put a big glob of speckle onto the screw. And completely fill the space next you'll scrape it off with the trowel. Making it flush with the sheetrock.

Can you use joint compound to fill holes?

In general, it's used for heavy wall repairing projects or for new drywall installation. Joint compound can also be used to fix small holes or smooth out divots in walls.

How do you fill a large hole in an internal wall?

Use a putty knife to fill them with spackling or wall joint compound. Allow the area to dry, then sand lightly. Anything larger must be covered with a bridging material for strength before patching compound can be applied.

How do you fill large holes in walls before painting?

Fill small holes and indents (less than 1/8 in.) with spackling compound. For larger holes, use joint compound instead. Apply either compound with a putty knife, spreading it thin on the wall.

How do you fix a 3 inch drywall hole?

0:1810:00How to Patch Holes in Drywall, Big and Small - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo this is just a common screw hole just take a small putty knife. And kind of go over it differentMoreSo this is just a common screw hole just take a small putty knife. And kind of go over it different directions and then we have some patch.

How to repair drywall: small holes, cracks, and dents

If that heavy picture pulled your screw through the drywall or years of old nail holes are starting to build up, give them a quick touch-up using just a few, inexpensive tools.

How to repair drywall: medium-sized holes

For holes that are under four inches in diameter but too large to fill with spackle, use a drywall repair kit. These kits typically include all of the tools you’ll need to complete the repair on your own.

How to repair drywall: large holes

For larger holes in your drywall that are bigger than four inches in diameter, you won’t be able to use putty or spackle to repair them. When repairing larger drywall holes, you’ll likely need to cut out some of the existing drywall. For this step, be cautious and avoid cutting any wires that run behind the walls.

Small Dents and Dings

Scrape away loose debris from the hole. Cover the hole or dent with fast-drying spackle to bring the spackle level with the drywall surface and let it dry 24 hours -- or the time recommended by the manufacturer’s instructions. Sand smooth.

Popped Nail Heads

A popped nail isn't holding in the stud and backs out of the drywall, creating a popped nail head.

Small Holes

For small holes, like those created by a doorknob, a patch kit may be used.

Large Holes

For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.

Corner Bead Patch

Corner bead is used where two pieces of drywall meet to form a corner. Corner bead is available in a variety of materials, including metal, paper and vinyl.

Finish the Repair

You're almost done. Here's where you make it look like nothing happened.

Repair Textured Drywall

Textured drywall is a bit more complicated, but still pretty simple to repair.