Fix Large Holes
- Step 1: Cut Out a Piece of Drywall to Use as the Patch. Cut a piece of drywall into a square a little bit bigger than...
- Step 2: Trace the Patch Size Over the Hole.
- Step 3: Cut Out the Hole.
- Step 4: Attach Furring Strips Inside the Hole.
- Step 5: Attach the Patch to Furring Strips.
- Step 6: Apply Joint Tape to the Patch.
How to repair a large hole in drywall?
Sand the wall around the hole and wipe off any dust. Apply the self-adhesive mesh patch on the damaged area. Cover the patch with joint compound or Spackle, depending on what comes in your kit. Feather the edges of the joint compound by increasing the pressure on the putty knife as you spread it on the existing drywall.
How to patch and repair drywall?
Luckily, you can usually repair drywall damage yourself without having to dial up the contractor or handyman. All you need are the right tools and the correct approach for the type of damage. Learn how to patch drywall, whether small nail holes or large ...
How to patch holes in drywall, big and small?
Materials
- Scrap lumber or plywood strips, at least 3 inches wide
- Piece of drywall (thickness must match drywall in repair area)
- 1 1/4 inch Coarse-thread drywall screws
- Self-adhesive mesh drywall joint tape
- Drywall joint compound
- Primer
- Paint
How do you repair a hole in drywall?
Tools Required
- Drywall sander
- Drywall saw
- Dust mask
- Paintbrush
- Screw gun
- Taping knife
- Utility knife
How do you fix a 6 inch hole in drywall?
2:5815:38How to Fix Holes in Drywall - 4 Easy Methods - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's option number one for your first coat option number two is what's called the presto patchMoreSo that's option number one for your first coat option number two is what's called the presto patch the presto patch is a really simple idea basically it's a four inch circle of half inch drywall.
Can you fill big holes with joint compound?
Tiny nail and screw holes are the easiest to fix. Use a putty knife to fill them with spackling or wall joint compound. Allow the area to dry, then sand lightly. Anything larger must be covered with a bridging material for strength before patching compound can be applied.
How big of a drywall hole can I patch?
6 inchesFor holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.
What is the best product to fill holes in drywall?
Read on for more info about spackle and the best spackle choices on the market.BEST OVERALL: DAP DryDex Dry Time Indicator Spackling Paste.BEST VALUE: DAP 18746 Alex Plus Spackling.BEST FOR NAIL HOLES: DAP 12142, 32.0 Fl Oz, White.BEST FOR LARGE HOLES: 3M High Strength Large Hole Repair.More items...•
How to cut gypsum panel?
To cut the new panel, place a straight edge against your line and score it with a utility knife. With the scrap edge hanging over a flat surface just beyond your score, quickly snap the piece downward to break the gypsum. Flip over your panel and cut the backing paper to remove the excess. Do this for all sides to be cut.
How thick is gypsum board?
Measure the thickness or depth of the existing gypsum board as well as the size of your newly formed hole. Gypsum comes in four thicknesses in most homes: – 1/4″ – generally used in curved applications, it is not common but may exist in some homes and is available but hard to find at most stores.
What size knife do I use to remove gypsum?
Joint and taping knives (I prefer a 6 inch and a 12 inch for most jobs) Sand paper (120 to 150-grit or drywall paper is best) Rag or sponge. Saw for removing damaged gypsum (this can be as basic as a “jab saw” or a power tool such as an oscillating multi-tool)
What do you do when you are satisfied with your joints?
Finishing. When you are satisfied with your joints, apply a coat of primer or your first coat of paint. At this time if you discover any imperfections, dips or divots, you can still add a small amount of joint compound and sand to correct before painting. Congratulations, you’ve completed your first drywall repair!
What to cover a floor with before starting?
Cover the floor you will be working on with poly or a another covering such as a drop cloth or old sheet.
Do it yourself drywall?
Do It Yourself : How to Repair / Replace a Section of Drywall. As a homeowner, it can sometimes be helpful to know how to repair drywall yourself. The primary reasons for this could be damage incurred while moving furniture, replacement of a window or door, cutting current drywall for a new light fixture, etc. ...
Small Dents and Dings
Scrape away loose debris from the hole. Cover the hole or dent with fast-drying spackle to bring the spackle level with the drywall surface and let it dry 24 hours -- or the time recommended by the manufacturer’s instructions. Sand smooth.
Popped Nail Heads
A popped nail isn't holding in the stud and backs out of the drywall, creating a popped nail head.
Small Holes
For small holes, like those created by a doorknob, a patch kit may be used.
Large Holes
For holes larger than 6 inches, you'll create a drywall patch with a different attachment method for the repair.
Corner Bead Patch
Corner bead is used where two pieces of drywall meet to form a corner. Corner bead is available in a variety of materials, including metal, paper and vinyl.
Finish the Repair
You're almost done. Here's where you make it look like nothing happened.
Repair Textured Drywall
Textured drywall is a bit more complicated, but still pretty simple to repair.
Tools Needed
Supplies Needed
- Pre-Mixed Joint Compound (1.75 pt should cover about 20 Square feet, or a 4×5 foot patch)
- Joint tape (I prefer Fibal type tape)
- Handi-Panel or sheetrock (gypsum) panel – You can buy these as 2×2 feet or standard 4×8 foot and cut as needed.
- Wood for anchoring or drywall repair clips
Preparation and Demolition
- Before starting, it’s a good idea to close off the space you will be working on and remove or cover anything you don’t want to get dusty or dirty. Cover the floor you will be working on with poly or a another covering such as a drop cloth or old sheet. In this example, the drywall being replaced is from a ceiling below a bath tub where the fixture was leaking behind the valve, so some of the dr…
Points to Remember When Mudding Joints
- Less is more – do not apply too much mud, or over work it.
- Aim for 2-3 coats ideally.
- Blend joints by extending past by 6-8 inches.
- Clean your tools in between and ensure they are dry.
Finishing
- When you are satisfied with your joints, apply a coat of primer or your first coat of paint. At this time if you discover any imperfections, dips or divots, you can still add a small amount of joint compound and sand to correct before painting. Congratulations, you’ve completed your first drywall repair!