- Gather the necessary tools
- Prepare the Lawnmower
- Disconnect the spark plug cable
- Remove the rewind housing with the help of a screwdriver
- Remove the damaged cord from the pulley
- Rotate the pully till the new string settles down and the pulley’s pellets are at the same place
- Attach the new pull cord in its place extremely carefully. Knot it at its location and heat it with a lighter.
- Cut off the extra length of the pull cord after it has been installed.
- Reinstall the recoil housing back in its place
- Reconnect the spark plug
- Test the newly installed pull cord by starting the lawnmower
How do you repair a pull cord on a lawnmower?
The first step in repairing a pull cord is to remove the rewind assembly from the lawnmower. How you do this will vary depending on your lawnmower model, but it's usually held on by three or more screws. Some mowers have a shroud covering the top of the mower. On these, you'll have to search for and remove the screws that hold the shroud in place.
How do you replace a pull string on a push mower?
Replacing a pull string on a push mower is a process that starts by removing the starter assembly from the mower housing. Replace a pull string on a push mower with help from the star of the eReplacementParts.com DIY video repair series in this free video clip.
Why is my lawnmower pull cord stuck?
There can be several reasons for a stuck pull cord, and we shall investigate those causes separately in this blog post. Step 1: To start, inspect your blade for any stuck strands of grass or debris. Remove them as they cause the pull cord to get stuck. Step 2: Open the blower housing and inspect the recoil starter.
How do I replace the spring on my starter cord?
If the entire spring mechanism needs replacement, remove the cord entirely and detach the hub from the starter’s cover. Replace the spring with a new one. Wind the hub. Reinsert the pull cord through the holes in the cover and in the hub.
How do you reattach a pull string on a lawn mower?
After you remove the rewind unit, flip it over and look inside to find the knotted end of the broken rope. Grab it with a pair of needle-nose pliers and pull it out. You'll thread the new replacement starter rope through this hole.
How do you fix a pull start string?
0:352:51How-To: Fix a Broken Recoil Rope - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe've applied a double knot on the other end of the rope. We've done the same thing we drew the ropeMoreWe've applied a double knot on the other end of the rope. We've done the same thing we drew the rope through the handle. And apply - double knot at the end.
How do you fix a pull cord spring on a lawn mower?
How to Fix a Recoil Spring on a Lawnmower, step by step:Step 1: Remove the Recoil Housing Cap.Step 2: Untie the Rope.Step 3: Replace Parts (If Needed)Step 4: Re-tension the Spring.Step 5: Attach the Cap.Step 6: Reinstall the Rope.Step 7: Coil the Cord.Step 8: Reattach the Recoil Housing Cap.
How do you fix a pull cord on a lawn mower that won't retract?
1:422:5510 second fix! Lawn mower pull cord not going back in recoil ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipI just quite simply lifted up the lawnmower. Spun the blade backwards.MoreI just quite simply lifted up the lawnmower. Spun the blade backwards.
How do you fix a pull cord spring?
2:0710:26Best 3 Ways To Install A Recoil Starter Spring On A Small Engine - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first thing you want to do here is cut the zip tie. Again make sure you're wearing your safetyMoreThe first thing you want to do here is cut the zip tie. Again make sure you're wearing your safety glasses. So now I have to remove it from the casing grab a good pair of pliers.
How do you start a lawn mower with a broken cord?
1:103:39How To Start A Broken Lawn Mower No Pull Cord PROBLEM SOLVEDYouTubeStart of suggested clipEnd of suggested clipSo my idea was do it like they did in the old days wrap a string around. It. Give it a Yank and seeMoreSo my idea was do it like they did in the old days wrap a string around. It. Give it a Yank and see what happens all right so that's what we're going to do now. One two three bolts.
How do you fix a Briggs and Stratton recoil spring?
3:109:44Briggs & Stratton Recoil Starter Service - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs needed inspect the starter housing for wear or sharp edges at the rope high level inspect theMoreAs needed inspect the starter housing for wear or sharp edges at the rope high level inspect the center pivot post and inner spring anchor tab for any type of damage replace.
What does it mean when the lawn mower string won't pull?
What if the starter rope won't pull? The crankshaft is connected to the blade shaft on your recoil start walk behind lawn mower, so if the pull cord is stuck, it could be because something is blocking the movement of the blade. Disconnect the spark plug for safety, then take a look under the deck.
What causes a pull cord to lock up?
One way the starter cord can get stuck is due to hydraulic lock, which is caused by oil getting trapped in the combustion chamber. You'll need to release the compression and the oil, so remove the spark plug and then give the cord a tug.
How do you wind a lawn mower spring?
0:050:56How to Rewind a Recoil Starter Spring--A Quick Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn first I just align the tab on the spring with the notch and the housing. And then I just wind theMoreIn first I just align the tab on the spring with the notch and the housing. And then I just wind the spring back into the housing. And that's how simple it is to rewind a starter spring.
Why is my lawn mower pull string loose?
Pull cord handle often breaks as the handle can sometimes fly loose during the starting procedure. The problem is, the cord may retract back inside the mower. This will require removing the pull start housing to re-tension the spring and fit the new handle.
How to check if a rope is wrapping?
Hold the pulley full of tension with one hand and rewind the rope around the pulley with the other hand. Make sure to check if your cord is wrapping fine or not by pulling it with little force after few rounds.
What is the 10th step of a recoil spring?
10th step: It is the most important step for a perfect recoiling spring. To make your work pay off, you’ll need to rotate the pulley counterclockwise. These rotations create certain tension inside the recoil spring that plays a significant role in start spring functioning.
Why is the recoil spring important?
To prevent this, it is vital to have accurate cord encasing .
Does a lawn mower keep grass trimmed?
The beautiful grass of your garden always needs maintenance, which people do with the help of a lawn mower. It always keeps the grasses trimmed and uniform, giving aesthetically pleasing appearance to your garden. But what if the rope is not recoiling back in the mower? Well, that can be a result of a recoil spring.
Can you remove a screwdriver from a recoil assembly?
While fixing it back in the recoil assembly again, you can remove the screwdriver carefully without losing any tension. It is a small hack, but it will save you a ton of labor as well as time.
Can a rope be too tight?
Do not let the rope be too tight that it feels short. Neither it should be too loose that a ton of its part keeps hanging out. Find a sweet spot between these two choices.
How does a Pull Cord Function?
The cord on your lawnmower connects to a hub that in turn spins when you pull the pull cord. This will spin the lawnmower’s blades together with the crankshaft.
How to reset a recoil spring?
Remove the engine starter and look for any tangles along the cord. Try pulling out the cord and rewinding it very slowly, then reset the recoil spring if it is possible or replace it altogether if necessary.
Why is my cord stuck?
A stuck cord with no movement may indicate a damaged cord , or that the cord is catch ing on a component within the housing: Perhaps it is tangling up. In a worst-case scenario, the recoil spring may simply be damaged meaning that you will need to replace it.
How to replace a spring on a starter?
Replace the spring with a new one. Wind the hub. Reinsert the pull cord through the holes in the cover and in the hub.
Why is my lawn mower jammed?
Another possibility is if by chance a debris skirt on the lawn mower is pushed inward and the blade of the mower jams against it . Check for this when looking at the blade underneath your mower.
Why does my lawn mower stop automatically?
Solution 1: Initially, I would check out the automatic brake on my lawnmower. Some manufacturers have their mowers automatically stop the engine for safety purposes.
What happens when a mower spins?
When these parts spin, their spinning establishes a magnetic electrical connection that fires your mower’s spark plug and the mower’s carburetor will send fuel into the chamber for combustion .
How to check if my lawn mower is hydro locked?
To check for this, remove the spark plug and the spark plug wire. Clamp the control bar at the mower handle to release the blade brake. With the blower housing removed, manually rotate the starter cup to see if the engine turns. If it turns, reinstall the blower housing.
How to free mower blades from debris?
To free the blades from any debris caught, you should tilt it over first. However, you should do that with your air filter pointing upwards. It is better to remove the spark plug cable so that the engine doesn’t start over. Now check if debris, grass, or a branch getting stuck between the debris curtain and the blade prevents the blades from spinning. If it does, you should remove it. Putting the spark plug back on and tilting the mower back shall now fix your problem with the pull cord.
Why won't my mower pull the starter cord?
The firing of the spark plug initiates the ignition. Hence, your engine starts over. If there are obstructions within the mower blades or the engine’s starter hub , you won’t pull the starter cord.
Why is my pull cord stuck?
For one, the development of grass or debris needs to be removed to allow the pull cord to work again . You might also have an issue with your recoil starter, which may be broken.
Why is my lawn mower not spinning?
This condition prevents It from spinning due to obstruction between the blade and the mower deck. As said before, the pull cord is responsible for spinning the mower blades that eventually start the engine. Hence, blades not able to spin mean that the cord cannot be pulled.
How to check if a recoil starter is working?
Check the recoil starter for any damage. Check whether it can spin by pulling the starter cable right near to it. Also, see if it is free from any debris or obstruction that may prevent it from spinning. If the cable appears tangled, you should rewind it.
How to replace a recoil starter?
Replacing the recoil starter: Replacing a recoil starter is seldom difficult. To perform the replacement, remove the recoil starter guard. Next, use a screwdriver to remove the tabs connecting it to the blower housing. Remove the old starter and add the identical one to its place in the tabs.
