
Repairing your old Delta faucet
- Turn off the water supply to your shower. Most showers don’t have single supply valves. As a result, the water to the entire house will need to be turned off. ...
- Go outside and turn on any of your home’s wall hydrants or faucets. Let it run for a few minutes. This will drain your home’s water supply. ...
- After you have removed this screw, the bonnet nut will also have to be removed. Use a strap wrench to do this. ...
- Equip yourself with a pair of fine tweezers. You can also use a sharp pick too. With either of these tools, remove both the springs and the rubber seats (10). ...
- Once you have removed both the springs and the seats, inspect the inside of the housing. What you want to look for are cracks or calcium build-ups. ...
- Insert the springs into the seats. Make sure that you insert the springs with the small side in. ...
- Take the ball assembly and lubricate it up. Once lubricated, insert it into the housing and make sure it’s aligned properly. ...
- While holding the cam down with your finger, you’ll want to thread the bonnet back on and then tighten it with your strap wrench. Reconnect the handle. ...
- Next, turn on your home’s water approximately one-third of the way. This will allow your pipes to slowly fill up. ...
How to repair old school Delta single handle shower faucet?
- With the handle removed, remove the trim sleeve and then the spacer. ...
- Now you’ll want to remove the bonnet nut with s strap wrench.
- Grab onto the valve cartridge and wiggle it back and forth while also pulling on it. ...
- Take your new cartridge and insert it. ...
- You’ll now want to line up the keys on the side with the slots found in the valve.
How to fix a leaky Delta Faucet?
- Best fish tank: Stylish abodes for your aquatic amigos
- How to clean a fish tank
- Best small fish tank: Petite pads for your tiny tribe
How to repair a Delta tub?
Items You Will Need to fix delta tub faucet dripping
- 1/8 inch Allen wrench
- Pencil
- Adjustable pliers
- Flathead screwdriver
- Phillips screwdriver
- White Vinegar
- Rubber Glove
- Springs and Seals
How to replace parts to old Delta shower valve?
Faucet Replacement Parts information for many models, including discontinued models, can be found through the Support section of the website. If you know your model number, enter it in the Know Your Model box provided. If you do not know your number, scroll down to the Product Identifier Tool and you will be guided through a wizard designed to ...

Why is my Delta shower faucet dripping?
With normal wear, the faucet's seats and springs become worn, which may result in a leak from the spout. To stop the leak, simply replace the seats and springs by following these steps: Here are some tools you may need: If you are not certain, you will need to find out if the hot or cold valve is causing the leak.
How do you stop a Delta shower from leaking?
1:234:13Repairing a leaky Delta bath or shower faucet-single lever and ...YouTubeStart of suggested clipEnd of suggested clipUm delta go is good for their cartridge. So if you want to call a company let them know that youMoreUm delta go is good for their cartridge. So if you want to call a company let them know that you have a set of delta faucets in your house they'll send you a new uh a new one at no charge.
How do I repair my Delta shower faucet?
0:5111:13How to Repair a Delta Tub / Shower Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou'll have to replace the kit this is what you'll need before you start the job the cam the bonnetMoreYou'll have to replace the kit this is what you'll need before you start the job the cam the bonnet gasket a ball.
How do you take apart a Delta shower faucet?
0:356:30How to Replace a Delta Faucet Shower Cartridge - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor more information check the cartridge reference sheet in the instruction. Manual. Using an allenMoreFor more information check the cartridge reference sheet in the instruction. Manual. Using an allen wrench loosen. The set screw holding the handle in place. Now remove the handle.
How do I know what Delta shower faucet I have?
The model number is on all packaging, some faucets, and all installation instructions provided with your faucet. On the packaging, look near the UPC code or the top of the box. On the faucet, a model identification tag has been attached to most models manufactured since 2012.
How do I fix a dripping shower faucet?
0:462:02How to Repair a Leaky Shower Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipEither way you need to do the repair from the valve. Itself. Which is this part here remove theMoreEither way you need to do the repair from the valve. Itself. Which is this part here remove the faceplate. And then the escutcheon or. Sleep.
How do you fix a leaky Delta 1700 shower faucet?
0:067:45Repair a Leaking Delta 1700 Shower Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipSeries faucet in our shower. And it's developed a little leak it's got a drip probably every 60MoreSeries faucet in our shower. And it's developed a little leak it's got a drip probably every 60 seconds to two minutes.
How do you fix a Delta 2 handle shower faucet?
0:226:52How to fix a leaking, dripping Delta bathtub faucet - $2 fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust take the covers off of these handles. So just get a little knife here. And pop those off nextMoreJust take the covers off of these handles. So just get a little knife here. And pop those off next you can see those screws in there so we've got to take those out so we can take the handles. Off.
Why does my shower head drip hours after I turn it off?
1:253:15How To Fix A Leaky Delta Two Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarterMoreUse a wrench or channel lock pliers to loosen the bonnet nut make sure to note where the quarter term stop is set on top of the cartridge. And use a pair of pliers to grab the top of the cartridge.How To Fix A Leaky Delta Two Handle Faucet - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do I change the cartridge in my Delta bathroom faucet?
Are Delta faucets guaranteed for life?
All parts and finishes of the Delta faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns their home.Delta Faucet Warranty Informationhttps://www.faucetdirect.com › delta-faucet-warranty-info...https://www.faucetdirect.com › delta-faucet-warranty-info...Search for: Are Delta faucets guaranteed for life?
How do you fix a leaky Delta 1700 shower faucet?
The Delta 1300 and 1400 Series Trim Kits include the single function cartridge. The Delta 1700 Series Trim Kits include the Dual-Function Cartridge. The 17T Series Trim Kits all come with the Dual-Function Thermostatic Valve Cartridge. Remember from before, ALL TRIM KITS USE THE SAME VALVE.Delta Shower Faucets - FaucetList.comhttps://faucetlist.com › blogs › buying-guides › delta-sho...https://faucetlist.com › blogs › buying-guides › delta-sho...Search for: Are all Delta faucet cartridges the same?
How do you fix a leaky shower wall?
More often than not, a dripping showerhead is the result of worn or damaged inner seals. The rubber washers or O-rings in your shower act as a seal between your showerhead and shower hose, preventing water from leaking out. Over time, these wear down, and when they do, water starts to leak out.
How Do You Fix a Leaky Delta Single Handle Shower Faucet?
Delta shower faucets are some of the most reliable and long-lasting in the industry. But they don’t last forever. At some point in their life they will start to leak.
1. Turn off Water to Your Shower
You cannot replace a shower cartridge with water already flowing in the pipes. Those who have attempted it have a story to tell.
2. Remove the Faucet Handle
A Delta shower faucet will have either a lever or a knob for a handle. Removing any of them is however very easy.
3. Remove the Cartridge
Remove the trim sleeve. This is the round piece between the handle and the cartridge. It is usually not threaded so you only need to slide it out. You will see a spacer when you look inside the trim sleeve. Put the sleeve aside.
4. Clean the Shower Valve Body
Grab a flashlight and inspect the inside of the shower valve body. Check if there is corrosion, mineral deposits or just any form of debris that will prevent you new cartridge from working properly.
5. Install the new Cartridge
Apply grease on the new cartridge’s O-rings. This helps it to seal effectively and also easy to pull out the next time you will be replacing it.
6. Install the Handle
Install the faucet handle back pretty much the same way you removed it.
What is a delta faucet?
Delta bathroom and kitchen faucets with two handles often are stem-style faucets that include a neoprene valve seat and spring that fits into the faucet below a cartridge-like insert stem. This is different from a true cartridge-style faucet, which closely resembles a stem faucet but does not have valve seats and springs.
How to tell if a faucet is leaking?
Determine Which Side Is Leaking. Place your hand under the drip from the faucet. If the water is warm, the leak is most likely on the hot side of the faucet. If the water is cold, the leak is most likely on the cold side. This tells you which is the better side to fix first, but it's possible that both sides are leaking in any case.
What is a stem style faucet?
With a stem-style faucet, a neoprone valve seat and spring fits into the water inlet port in valve body. Over the valve seat and spring, the stem is held into the body with a bonnet nut; the handle then fits onto the top of the stem. Leaks in this type of faucet usually can be fixed with a new neoprene valve seat and spring.
How to remove valve seat and spring?
Remove the seat and spring by inserting a small screwdriver or Allen wrench into the hole of the seat and pulling up both parts together. Note the spring's orientation inside the valve seat. The spring should be slightly larger in diameter at the bottom than at the top—where it fits into the seat.
How to replace a valve stem?
If desired, you can also replace the O-ring (which is sometimes included with stem-and-spring kits) or the entire stem. Fit the stem into its housing, aligning the tabs on the stem with the slots in the housing. Push the stem all the way down until it stops.
How do I shut off the water in my kitchen sink?
The valve may have a small football-shaped handle or a lever or knob. Turn the handle clockwise until it stops. Open the hot or cold faucet, as appropriate , to make sure the water is off.
Where is the valve seat on a faucet?
Look inside the stem housing and locate the neoprene valve seat sitting in a hole at the bottom of the faucet housing. The valve seat is a small, black, rubber cap with a hole in the top. Sitting inside and below the seat is a small metal spring.
How to drain water from shower?
Go outside and turn on any of your home’s wall hydrants or faucets. Let it run for a few minutes. This will drain your home’s water supply. Head back inside and turn on the shower faucet. This will also help drain the last of the leftover water. You’ll now want to remove the handle.
Why does my water pressure change?
A change in water pressure, sudden changes from hot to cold, and consistent leaking can all be a result of a faulty valve cartridge. If you know this is the problem, then instead of replacing the whole unit, you can simply just change the valve cartridge. So, how do you do this?
