how to repair leaking flush valve on toilet

How to Repair a Leaking Toilet Flush Valve

• Step 1 - Inspection. Open the toilet tank up and inspect the inside of the tank, you need to look at whether or not it...
• Step 2 - Shutting off the Water. Before you start work on your toilet you should shut the water off, if you have a wall...
• Step 3 - Emptying the Toilet. Press the toilet handle to flush the toilet so that the...

Full Answer

How can I Fix my leaking toilet?

• Shut off the water supply.
• Flush the toilet.
• Disconnect the water supply.
• Unscrew the nuts holding the tank to the bowl.
• Lift the toilet tank.
• Replace the bolts with the new, brass ones.
• Place the new gasket over the drain valve on the bottom of the tank.
• Replace the tank to its original position.

How to fix your leaking toilet?

• Shut off the water at the valve and drain the water from the toilet tank, as indicated above.
• Use a plunger to force out any water that remains in the bowl. ...
• Dry out the bowl completely.
• Disconnect the water supply line from the toilet tank; loosen the nut that attaches the supply line to the tank and it should slide out easily.

More items...

How to fix a toilet that leaks without flushing?

Use a Piece of Toilet Paper

• Cut about 10 sheets of toilet paper and fold them together into a roll.
• Use a dry piece of cloth (or just toilet paper) to wipe dry the inside of the bowl and especially around the rim of the bowl.
• Place and hold the toilet paper roll on the rim of the toilet bowl for about 10 minutes. ...

How do I fix a leaking valve?

Some of the ways your doctor can fix a damaged valve include:

• Annuloplasty: A special ring is put around the valve to make it close right.
• MitraClip: A small cut is made in your groin, and the clip is pushed up to your heart through a thin tube. ...
• Patching: If there are holes or tears in the valve's flap-like doors, a tissue patch is put in place to cover them.

More items...

How to undo a toilet flush valve?

Undo the valve by unclipping the ears which hold it in place. Unclip the strap connecting the handle to the flush valve so that the toilet flush valve can be removed. If this is damaged then it cannot be repaired and will need to be discarded.

How to check if a flush valve is leaking?

Check for any signs of leaks, if there are leaks then check that the flush valve is seated correctly and is blocking the hole where the water runs out. Check that the chain isn't too tight against the valve as this will prevent the valve from closing properly.

How to flush a toilet that has shut off?

Press the toilet handle to flush the toilet so that the water drains out, because you have shut off the water the tank will not be able to fill up again. Take a look at the flapper or toilet flush valve located at the bottom of the tank. You will see that the flush valve is made out of a piece of rubber and hinges upwards to open.

What is a flush valve made of?

Most of these flush valves are made from rubber although some of them will be made from much higher quality and more durable materials which will help them to last longer even in chlorinated water. When the parts get older they can become brittle and this will result in them cracking or becoming damaged.

Do you have to shut off the water before using a toilet?

Before you start work on your toilet you should shut the water off, if you have a wall valve located close to your toilet then you can use this . Otherwise you will need to use the master water valve which is normally located outside of your home.

Can you fix a leaky toilet valve?

Anyone who is suffering from a leaky toilet will find this a very irritating and frustrating problem, fixing a toilet flush valve is actually one of the easiest things that any home owner can actually do. This will also prevent you from wasting a lot of water because otherwise this water will be flushed down the drain.