How to fix LG TV Magic Remote Not Working
- Replace Batteries. If your magic remote doesn’t seem to respond to any controls, the first thing you want to do is replace the batteries.
- Reset Your Device. Resetting your device will unregister your smart remote to your TV, allowing you to re-pair your device to your TV.
- Ensure Sensors aren’t Blocked. ...
How do i un-pair my magic remote control?
Quick Un-pair: To quickly un-pair and re-pair the magic remote press and hold the EXIT button for 5 seconds. Turn the TV ON. Connect the RF dongle to one of the open USB ports on the back of the TV. Allow approximately 20 seconds and press the OK (scroll wheel) to register the remote.
How do I Fix my LG remote that won't turn on?
[Solution] How to Fix a LG Remote 1 If ALL the buttons on the remote control are not working, try replacing the batteries. 2 Replace the batteries matching + and - ends to the label inside the compartment. 3 Do not mix old or used batteries with new ones. Blocking the . See More....
How do I connect my 2017 magic remote to my TV?
2017 magic remotes only work with 2017 model televisions. Turn the TV ON. Connect the RF dongle to one of the open USB ports on the back of the TV. Allow approximately 20 seconds and press the OK (scroll wheel) to register the remote. NOTE: The RF dongle is included when the remote is purchased as an optional accessory.
How do I unregister the RF dongle?
NOTE: The RF dongle is included when the remote is purchased as an optional accessory. Press and hold the BACK and HOME button for 5 seconds to unregister the remote. NOTE: A red LED indicator will blink when the remote is unregistered. Press the OK (scroll wheel) to re-register the remote. Turn the TV ON.
How do I fix my LG Magic remote?
First, check if the Power button lights up when pressed. If the Power button does not light up, try to change both batteries. Changing only one battery can cause errors. If the Power button does light up, try shaking the remote.
How do I fix my LG Smart TV remote?
0:092:21How To Fix a LG Remote Control That's Not Working - YouTubeYouTubeStart of suggested clipEnd of suggested clipCompletely then unplug the tv power source from the wall. Outlet. Then wait 60 seconds try to beMoreCompletely then unplug the tv power source from the wall. Outlet. Then wait 60 seconds try to be patient. And wait the whole 60 seconds then plug the tv back in put the batteries back in the remote.
Why is my magic remote not working?
FOR MAGIC AND STANDARD REMOTES. If ALL the buttons on the remote control are not working, try replacing the batteries. Replace the batteries matching + and - ends to the label inside the compartment. Do not mix old or used batteries with new ones.
Why is my LG remote not working?
0:111:54LG Remote Not Working with TV - 3 Ways to Fix it - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain okay the first thing that you're going to want to try is to remove the batteries from theMoreAgain okay the first thing that you're going to want to try is to remove the batteries from the remote control completely then go over to your tv. And unplug the tv from the wall outlet.
Why is my remote not working?
Perform a power reset. If the issue is caused by an external factor, such as network service, data broadcasting, or connected devices, it may be improved by a power reset. For Android TV™ or Google TV™ models, unplug the power cord, wait two minutes, and then plug it in.
How do I reset my LG TV remote?
Press the Smart button on your remote, then click the Gear icon in the top right, then General > Reset to Initial Settings.
How do you reset a remote control?
For Android TVs released in 2015 or later, symptoms may improve by updating the software of the remote control....Reset the remote control.Open the battery compartment cover and remove the batteries.Press and hold the Power button for three seconds.Insert the batteries again and close the battery compartment cover.
Why is my remote not working even with new batteries?
Clean the remote control terminals. The remote control battery terminals may be dirty. Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries.
1. Check the Battery
Well, I will confess that this worked for me. I know this might sound basic advice, but because magic remote uses Bluetooth, you’re likely to have worn out batteries sooner than normal a remote. Also, before trying out tons of other methods or tricking yourself into wasting time trying those out, why not just change batteries?
2. Blocking the Set-Top Box
Since I use a DTH connection, a set-up box or a receiver is necessary to be paired up with the TV to view subscribed channels. The set-up box connects physically with the TV, so there is no standard way/place to keep it.
3. LG webOS Magic Remote
Well, if the above methods don’t work, another great alternative is using a mobile app for LG smart TV. This will save you from investing in a new remote. Maybe, you have an extra phone lying in your apartment that can be put to use. We’re going to use an app called LG webOS Magic Remote.
4. Reset the Remote
To reset, take the battery out and leave it for a few minutes, and put it back again before you turn on the TV. After about 10 seconds, turn the remote towards the TV and press the wheel button in the middle. That’s it. You’ll get a ‘pairing is complete’ message on your screen. Now you can use your remote normally.
5. Initialize the Remote
If you were not successful in the above method then try and initialize the remote. To do this, press and hold smart home and back button on the magic remote for about 5 seconds. Now press the wheel button to pair the remote again as discussed in the previous step.
6. Other Hacks
LG suggests that the remote is likely to create issues if used near a fluorescent lamp or an appliance with an electronic stabilizer. Also, a lot of users think that the remote is not working if the cursor disappears. Remember that’s not the case as you can make it appear again by shaking the remote.
What is magic remote?
MAGIC remote controls have a trackball in its center and displays like a computer mouse's pointer on the TV screen. STANDARD remote controls are flat, and they do NOT display a movable pointer on the screen. You can use your magic remote to control other compatible devices in your home.
What to do if remote control is not working?
If ALL the buttons on the remote control are not working, try replacing the batteries.
How to register a TV remote?
How to register (Pair) Turn the TV ON. Connect the RF dongle to one of the open USB ports on the back of the TV. Allow approximately 20 seconds and press the OK (scroll wheel) to register the remote. NOTE: The RF dongle is included when the remote is purchased as an optional accessory.
What does the red light on a remote control mean?
A red LED indicator will blink when the remote is unregistered.
How to connect an WF500 remote to TV?
If required, connect the AN-WF500 dongle to one of the open USB ports on the back of the TV. Allow approximately 20 seconds and press the OK (scroll wheel) to register the remote. NOTE: If the model requires the use of the AN-WF500 it much be purchased separately.
How long does it take to register a remote?
Allow approximately 20 seconds and press the OK (scroll wheel) to register the remote.
Do standard remotes have movable points?
STANDARD remote controls are flat, and they do NOT display a movable pointer on the screen.
