how to repair lg washing machine door lock

1. Turn off your washing machine’s water and power supply.
2. Get some fishing line or any similar type of wire.
3. Run the wire around the door and pull the two ends gently but firmly towards your left (away from the door lock). ...
4. Order a new door lock assembly online (make sure to check the model of your washer when ordering).
5. Wedge a flat-blade screwdriver under the retaining wire of the door seal and work your way around you can take the whole wire out.
6. Peel the door seal back a bit from the door lock.
Using a Philips screwdriver, remove the two screws holding the door lock to the washing machine.
Put your hand inside the washer to support the other end of the door lock and detach the electrical connector connected to the door lock.
Get your new door lock assembly out of its pack.
Install the new door lock into the same position as the one you removed and secure it to the washing machine by applying the two screws.
Connect the electrical connector inside the washing machine to the terminal on the door lock assembly.
Push the door seal back in place around the door opening.
Fit the retaining band back around the door seal (you may need to use a flat-blade screwdriver to do this).
Close the door of your washing machine.
Turn on your washing machine’s water and power supply.
Run a wash cycle to see if the issue has been resolved.

Full Answer

Why does my LG washing machine lock the door when washing?

If the water level is too high, if the water temperature is too hot, if there is a brief power outage, Your LG washing machine is equipped with the sensor that detects washer operation as well as water level, and temperature. When the washer is running a cycle the door will automatically lock to prevent injuries.

How do I unlock the door on my LG front load washer?

To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.

What to do if your washer door lock is not working?

The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage.

How do you fix a whirlpool washing machine that won't turn on?

1 – Press the POWER button to turn washer OFF. 2 – Remove the washer from power. 3 – Press and hold the START/PAUSE button for 5 to 10 seconds. 4 – Apply power to the washer. 5 – Turn the unit back on by pressing the POWER button. 6 – Open and Close the washer door, making sure the door has latched.

How do I fix the lock on my LG washing machine?

0:004:11Replacing the Door Lock Assembly (LG Part # EBF49827801) - YouTubeYouTubeStart of suggested clipEnd of suggested clipLet me show you how we do it now before we begin this repair the first thing we'll need to do is toMoreLet me show you how we do it now before we begin this repair the first thing we'll need to do is to disconnect power to the washer. So unplug it. And that's we'll open up the door.

How do I fix my LG door lock?

0:003:09[LG Washing machine] - How to replace the door lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse gasket spring pliers phillips screwdriver and some soap with. Water when taking out the springMoreUse gasket spring pliers phillips screwdriver and some soap with. Water when taking out the spring be careful not to damage. The. Gasket remove the door lock screws push and take out the door.

Can you bypass the door lock on LG washing machine?

To do so, power on the machine, press the spin speed button until No Spin is selected. And then start the cycle. This will activate the drain only function on your LG front load washer. Once the water has drained pause or stop the cycle and the door will unlock.

Why is my LG washer door not locking?

Common solutions for: LG Washer door or lid won't lock If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it.

How do you fix a washing machine door lock?

0:094:20How to fix a washing machine door lock in a Hotpoint ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow. I need to remove the seal to get to the door interlock and to do this I need to remove theMoreNow. I need to remove the seal to get to the door interlock and to do this I need to remove the retaining band. And I'm going to now just remove that by using a flathead screwdriver.

Why is my washing machine door not locking?

The door lock could be defective or worn out, so it no longer keeps the washer door closed. Most lock assemblies are made of plastic, so if it's defective, you won't be able to repair it, and instead have to replace it. The door lock motor and switch assembly can also be defective, either mechanically or electrically.

How do I fix my door lock?

0:032:18How to Repair a Door Lock Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you find it difficult to turn the key in the door lock. Then just take a small tube of graphiteMoreIf you find it difficult to turn the key in the door lock. Then just take a small tube of graphite lubricant shake. It up a little bit. And then shoot a cup of puffs.

Can you override washing machine lock?

You cannot bypass your washing machine door lock if you do not know the problem. Once the problem is identified, you can move to the next step. While recognising the problem, be as keen as possible to avoid confusion.

How do you fix a door that won't lock?

1:1710:32Door Won't Latch—3 Easy Fixes! - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf it doesn't work you move on to fix number two which is to file the strike plate down I go aheadMoreIf it doesn't work you move on to fix number two which is to file the strike plate down I go ahead and remove the strike plate by backing off the screws with a screwdriver.

How do you test a washing machine door lock?

0:439:12How a washing machine door lock works, how to test interlocksYouTubeStart of suggested clipEnd of suggested clipThe only real check you can do to a door lock outside of the parameters of an electrical field is toMoreThe only real check you can do to a door lock outside of the parameters of an electrical field is to actually check the PTC heater this heats the bi-metal strip inside.

How do you replace a LG door latch?

0:479:58How To: LG/Kenmore Door Latch Hook MFG62439301 - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing the Philips screwdriver take out two lower bracket screws pull back the top panel about anMoreUsing the Philips screwdriver take out two lower bracket screws pull back the top panel about an inch and then lift it off the washer. We need to pull out the detergent drawer assembly.

How do I test the door switch on my LG washing machine?

1:194:05How to check Door Switch in LG Front Load Washing Machine ( DE Error )YouTubeStart of suggested clipEnd of suggested clipMachine it is showing 238 volt ac it means supply is going to door switch if resistance is notMoreMachine it is showing 238 volt ac it means supply is going to door switch if resistance is not coming in door switch then check by shorting. Short red and black point it is showing as door locked.

Why does my washer keep locking the door?

however if you need to stop the washer for some reason during a cycle, the control will keep the door locked if the water level is too high, or if the water is too hot. If you are experiencing a locked door and the water level is high inside the drum run a drain only cycle to drain the water from the drum. To do so, power on the machine, press the ...

How long does it take for a washer to unlock?

If the washer has cooled and there is no water inside it, and it is still unable to open unplug the power cord and wait 3 to 5 minutes.

Common solutions for: LG Washer door or lid won't lock

The door lock secures the washer door shut during operation. Once the washer door is closed, the washer can begin operating. If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage.

The Right Parts for the Job

We carry more than 4 million parts from over 175 major brands, so chances are, we've got the part you need.

What does DE code mean on LG washer?

If you suspect the LG washer door latch to be faulty, replace it. A DE code on an LG clothes washer indicates that a problem with the door exists. Although this code is most often seen when the door is locked shut and you cannot open it, it can appear at any time and for different reasons.

How to get DE code on washer?

Step 1 - Identify when you are receiving the DE code. It can appear if you have an item caught in the door, at some point during the middle of a cycle, at the end of a cycle, if you paused the machine or if the door is damaged. Step 2 - Remove any item that may be caught in the washer's door.

Why won't my washer start?

When your washing machine will not start you may have a fault the dE error code indicates that the washer door was unable to lock. This can normally be resolved by performing a simple reset on the washing machine or you may have a fault with the pin system or hinge but normally this will be a common problem with the door interlock.

Can you bend a washer door?

Make sure the door is aligned properly and not bent. If the hinges on the washer door have been bent, you can try bending it back into position. If unable, you will need to install a new washer door hinge.