how to repair logitech wireless mouse

Full Answer

What alternatives are there to a Logitech wireless mouse?

you could go to wired with the intellimouse pro the razer death adder . there is some wireless alternative like the mamba. the ultra light gwolves sk l is coming soon too.

How do you troubleshoot a wireless mouse?

Troubleshooting a Wireless Mouse in Windows

• Change the Surface the Mouse is On. Even optical mice can sometimes have an issue with the surface they are used on. ...
• Check the USB Dongle. ...
• Adjust the Mouse Battery. ...
• Change the Battery. ...
• Clean Your Mouse. ...
• Reboot Your Computer. ...
• Check Your Drivers. ...
• Try the Mouse on a Different Computer. ...

How do I slow down my Logitech wireless mouse?

How do I change my Logitech mouse settings? In the view of Category, click Hardware and Sound. Under Devices and Printers, click Mouse. Click the Pointer Options tab. In the Motion section, move the slider to adjust your mouse pointer’s speed — move the slider to the left to slow down your mouse or to the right to speed up your mouse.

How do I unpair my Logitech mouse?

How Do I Unpair My Logitech Mouse? Unifying software from Logitech should be launched. You can click Advanced once you’ve finished. You will see a list of Unifying devices. Click the device you wish to unpair and then tap Un-pair to unpair it.

See more

How do I reset my Logitech wireless mouse?

Check the bottom of your mouse, and turn the power to the On position. Look under the power button for the reset button. If one is there, hold the reset for five full seconds to reset the mouse.

Why is my wireless mouse not working Logitech?

The reasons why your wireless mouse might not be working is because it has a low battery, it isn't connected to the right port, the USB drivers are not properly installed, or the surface on which you are using the mouse is not optimized for the mouse.

How do I reconnect my Logitech wireless mouse?

0:241:50Connecting your Logitech POP Mouse to a PC via Bluetooth - YouTubeYouTubeStart of suggested clipEnd of suggested clipLong press the easy switch button on any channel of your choice until the light starts blinkingMoreLong press the easy switch button on any channel of your choice until the light starts blinking rapidly. Once your pop mouse is detected the swift pair notification will pop up on your screen.

How do I open my Logitech mouse to fix it?

No parts specified.Step 1 Remove the bottom cover. Switch off the mouse and slide out the bottom cover. ... Step 2 Remove the battery and sticker. Remove the battery and sticker. ... Step 3 Unfasten the clips. Identify the clips. ... Step 4 Pop off the top cover. ... Step 5 Enjoy the insides. ... Step 6 Put it back together.

What do you do when your Logitech mouse stops working?

Solutions for the Logitech Mouse Not Working IssueCheck if the mouse is placed on a flat surface.Turn the mouse Off and On.Disconnect and reconnect the mouse.Use a different mouse.Replace the batteries.Connect in a different USB port.Use the mouse with a different computer.Reinstall the Mouse drivers.More items...•

What causes a wireless mouse to stop working?

If you are having trouble with your wireless keyboard or mouse, make sure the batteries are not worn out and are installed properly. On some mouse models, you should see a red light emitting from the bottom when it is powered on when you lift it slightly off its surface.

How do I connect my Logitech mouse without USB?

If your Logitech wireless mouse supports Bluetooth, you can connect it via Bluetooth instead of a receiver. To do this on a Windows 10 PC, go to Settings > Devices > Add Bluetooth. On your mouse, press the Connect button; the device should appear as an available Bluetooth device on your screen.

How do you fix a broken mouse?

Try these steps, organized in order of most-common and easiest to most intensive.Inspect the mouse for hardware damage. ... Clean the mouse. ... Replace the batteries. ... Try a different USB port. ... Connect the mouse directly to the USB port. ... Use the mouse on an appropriate surface. ... Update the driver.More items...•

How do you disassemble a wireless mouse?

0:264:12Computer wireless optical mouse disassembly - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis Logitech mouse which is a Bluetooth unit that connects to computer by bluetooth I alreadyMoreThis Logitech mouse which is a Bluetooth unit that connects to computer by bluetooth I already remove the two stickers on the bottom of the mouse.

Why is my mouse left click not working?

To turn it on, go to Start > Settings > Devices > Mouse > Related Settings > Additional Mouse Options. The Mouse Properties window will pop up. At the bottom of the Buttons tab, you'll see the ClickLock options. Put a tick in the checkbox to enable it.

How do you open a Logitech m325 wireless mouse?

0:186:15Logitech m325 teardown - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you have to remove this screw after realizing that it's true. This new screwdriver unscrew thisMoreAnd you have to remove this screw after realizing that it's true. This new screwdriver unscrew this thingy majiggy and you should get the back to pop off and believe.

How do you take apart a Logitech Pebble mouse?

2:449:5535 Tear Down & Clean Logitech M350 Pebble Wireless Bluetooth Mouse ...YouTubeStart of suggested clipEnd of suggested clipSo it's secured with one screw and some clips. So the trick of tearing this apart is you need to useMoreSo it's secured with one screw and some clips. So the trick of tearing this apart is you need to use a really thin pry tool and slot it against the rear end.

How do you take apart a Logitech m215 mouse?

No parts specified.Step 1 Remove the battery cover. The battery compartment cover is located on the top of the mouse. ... Step 2 Remove old battery. Remember to insert the new battery in the same orientation as the old one. ... Step 3 Button Plate. ... Step 4 Pry off buttons. ... Step 5 Scroll Wheel.

Why do my Logitech mouse ports stop working?

If you’re using a laptop, test all of the USB ports on both sides of the laptop. However, in most cases, Logitech mice stop working due to driver issues. Drivers are essential for any device to function properly and while you may not think that mouse drivers are important, rest assured that they are.

How to fix choppy mouse cursor?

The first thing you should do is check your mouse’s battery. If your batteries are failing, then you should experience choppy mouse cursor movements. Insert a new battery into your mouse, but before you do, leave your mouse without a battery for a few minutes allowing it to fully discharge. Also, remove the USB receiver.

How to update Logitech firmware?

1. Open your web browser and go to the Logitech Firmware Update Tool download page. 2. To get the Firmware Update Tool, click the Download Now button. Note that you can click the All downloads button and select a different operating system. 3. Once it’s downloaded, run the Firmware Update Tool. 4.

Why is my mouse choppy?

Another reason your mouse cursor’s movements may be choppy is if you’re using your mouse on an incorrect surface such as a glossy desktop. Try a different surface or try using your mouse on a quality mousepad. Connect the USB mouse receiver to a different USB port. If your wireless Logitech mouse suddenly stopped working, ...

What is Logitech software?

Logitech is a Swiss-American-owned company that manufactures computer peripherals and software. It’s one of the world’s leading manufacturers of interface devices for personal computers and other digital products.

How to update mouse drivers?

If you have a laptop, then you’ll have to use its touchpad. 1. Hold down Windows+R keys to open the Run dialog box. 2.

What is Logitech best known for?

However, the company is best known for its PC input devices such as mice, keyboards, headsets, and gamepads. The company’s flagship computer accessories Logitech MX line ...

How to reinstall mouse drivers?

Mentioned below are the steps you should use in order to reinstall the drivers. 1 Once the “ Device Manager ” utility is open, you should use the keyboard to navigate. In this case, we assume that your mouse doesn’t work at all. So, use the arrow keys on the keyboard and go to “ Mice and other pointing devices .” You can then press “ ALT ” + “ right arrow ” keys so the category will be expanded. This will open your Logitech Mouse. 2 Hit “ Shift ” and “ F10 ” keys and open the context menu. 3 You can then use the arrow keys to choose the option called “ Uninstall ” and hit “ Enter .” As a result, the driver will be uninstalled.

Does Logitech have a mouse driver?

In general, Logitech releases new updates for mouse drivers pretty often. These updates can be found on their official website. If the existing mouse driver is outdated, your mouse may start to malfunction and become totally undetectable. So, the only way to get rid of this issue is by updating the mouse driver.

Tools

These are some common tools used to work on this device. You might not need every tool for every procedure.

Background and Identification

Logitech computer mice are made by Logitech International S.A., a Swiss computer peripherals and software company based in both Newark, CA and Lausanne, Switzerland. They are one of the foremost PC peripherals companies in the world.

Why is my Logitech mouse not working?

The very first step is to verify the batteries are charged enough.

Why does my mouse stop working?

And, when your mouse stops working, the culprit is the faulty USB cable in most cases.

Does Logitech wireless mouse work?

Logitech’s wireless mice generally work pretty well as most of them use a unifying receiver with a 2.4G wireless connection between the mouse and your computer/laptop. But, due to a lot of different reasons, your wireless mouse may stop working.

Can Logitech mice be connected to Bluetooth?

A number of Logitech wireless mice come with an option for Bluetooth connectivity. Normally, we connect using the 2.4G wireless connection but if that is not working, try connecting using the Bluetooth (if available).

How to unpair a Logitech keyboard?

Unpair a mouse or keyboard from the Unifying receiver 1 Open the Unifying software:#N#Start > All Programs > Logitech > Unifying > Logitech Unifying Software 2 On the Welcome window, click Advanced… 3 In the left pane, select the device you wish to unpair. 4 On the right side of the window, click Un-pair, and then click Close. This will remove your mouse or keyboard from the list of Unifying devices and it will no longer work with your computer. 5 To make your device work again, you will need to re-pair it with the Unifying receiver. See Connecting a device to a Unifying receiver for more information.

How to get my keyboard to work again?

On the right side of the window, click Un-pair, and then click Close. This will remove your mouse or keyboard from the list of Unifying devices and it will no longer work with your computer. To make your device work again, you will need to re-pair it with the Unifying receiver. See Connecting a device to a Unifying receiver for more information. ...

How to clean Logitech button?

Clean the button by blowing on it or squirting it with a can of compressed air. Assign a different command to the button using Logitech Options Software. Test the device on a different computer. Clean the button by blowing on it or squirting it with a can of compressed air.

How to test a USB device?

Test the device on a different computer. Clean the button by blowing on it or squirting it with a can of compressed air. Plug the device (or receiver) into a different USB port on your computer. Don't use a USB hub or similar device.