How to Troubleshoot the Maytag Ice Maker
- Ice maker turned off
- Ice maker jammed
- Water filter needs to be replaced
- Water system needs to be flushed
- Check water supply line
Full Answer
Why is my Maytag refrigerator ice maker not working?
If the ice maker in your Maytag refrigerator has stopped working, there is no need to panic, as there is often a simple fix. In most cases, the ice maker stops working because of ice build-up or the need for a new water filter.
Can you use any Maytag ice maker with any water filter?
Maytag always recommends only using the Maytag water filter to ensure your ice maker has the best pressure. Using any other brand can reduce water pressure, which may lead to improper cleaning. 8. Icemaker Mold Thermostat Not Working
How do you fix an ice maker that won't make ice?
Remove jammed ice from the ejector arm using only a plastic utensil so the ice maker is not damaged. This will likely resolve the issue. Because the ice may not be completely frozen yet, when the harvest fingers try to harvest the ice cubes, the fingers bring up icy water that attaches to the stripper.
Can you replace the Ice Tray thermostat on a Maytag refrigerator?
If defective, on most models the ice tray thermostat can be removed and replaced. Some Maytag refrigerators have an ice level control board that operates an infrared beam that signals the ice maker to stop making ice when the ice bucket reaches a certain level.
How do I fix my Maytag refrigerator ice maker?
0:272:12Maytag Refrigerator Ice Maker Troubleshooting - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf your ice maker has been making ice. But suddenly is not working check the ejector arms of the iceMoreIf your ice maker has been making ice. But suddenly is not working check the ejector arms of the ice maker to see if ice is jammed in the arms. If. So gently remove the ice.
How do you check a Maytag ice maker?
2:2120:28How to Test and Replace Maytag/Whirlpool Gold Ice Maker ...YouTubeStart of suggested clipEnd of suggested clipYou have to get into diagnostics. And you do that by shutting. The left door holding the twoMoreYou have to get into diagnostics. And you do that by shutting. The left door holding the two leftmost buttons on the display hold it for three seconds.
Why is my Maytag refrigerator not making ice or water?
Make sure the water supply is properly connected to a cold water supply and the water shutoff valve is fully opened. Check to make sure there are no kinks in the water supply line. A kink in the line can reduce water flow. Straighten the water source line to restore adequate water flow and pressure.
How do you unfreeze a Maytag ice maker?
2:514:01Ice maker FROZEN over - how to FIX your freezer machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I needed to clean it out a bit and kind of get things moving again line up your ice maker withMoreSo I needed to clean it out a bit and kind of get things moving again line up your ice maker with the water pipe and the brackets that hold it in place reconnect. The power screw.
Is there a reset button on Maytag ice maker?
Try a Simple Reset If it is not a mechanical or parts failure, this simple fix may get your ice maker working again. Most ice maker models also have a reset button. Models with a display panel can be reset by consulting your manual for the reset instructions.
What causes a ice maker to stop working?
If your ice maker isn't producing ice at all or is producing crescents or cubes that are smaller than usual, it's typically indicative of a clog somewhere along the supply line. Cause: A common cause for a clog is frozen water in the line. Fix: To repair a frozen line, slide the refrigerator and unplug it.
Why is my refrigerator not dispensing water or making ice?
Water tubes within the refrigerator may be frozen and cause a water supply issue. – Check water to ice maker to see if the water line is frozen. – Inspect for a bad valve or low water pressure to the fridge. Find the Frozen Water Tube or line and heat it with a hair dryer to defrost the water lines or tubes.
How do I reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
How do I fix my water and ice dispenser?
2:033:55Ice and Water dispenser not working - DIY Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipLine up your new board on these four mounting posts and gently press it into. Place. Now carefullyMoreLine up your new board on these four mounting posts and gently press it into. Place. Now carefully reconnect the wiring harnesses to the pin. Connectors.
How do I unblock my ice maker?
Apply heat with a hairdryer to the ice maker fill tube, which is usually a white, rubber-like hose. Hold the nozzle of the hairdryer at the front of the ice maker so that the heat will blast into the fill line. Set the hairdryer to its lowest heat setting to avoid melting the plastic lines and parts of the ice maker.
How do I force my ice maker to cycle?
If your gear has a small notch in it, then you may need a flat-head screwdriver. Use it to turn your gear counterclockwise until you hear the mentioned click. In both situations, the click that is heard will force the ice maker to cycle.
How do I reset my ice maker?
Unplug the machine and wait 10 seconds. Plug the machine back in and press the ON button. You should see a blue light appear, letting you know that the machine has been reset.
How do I test my ice maker control board?
First, open the freezer door and look at the status LED on the right hand side. Make sure the ice maker control is turned “ON”. The status LED should blink twice, pause, and then repeat (blink blink…. pause.
How do I test my ice maker power?
0:092:49Testing ice maker voltage - How to measure voltage - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe black line always goes in calm it says column right down there I don't know if you can read thatMoreThe black line always goes in calm it says column right down there I don't know if you can read that and then your red line goes all the way over here. I'm setting mine on voltage.
What causes an ice maker to stop working?
There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your water supp...
Not dropping ice
If your ice maker is not dropping ice, it could be that there’s a blockage in the ice tray, or an ice cube is jammed between the bin and the lever....
Not making enough ice
There could be several reasons your ice maker might not be making enough ice, including low water pressure or a kink in the water line. To check if...
Not making any ice
The culprits behind your ice maker not making any ice may cover a wide range, as listed below:Make sure your freezer’s thermostat is set to 0ºF for...
Leaking into freezer or on floor
Water leaking from the ice maker could mean that either your refrigerator or ice maker isn’t level. A faulty water line could also be responsible.L...
Ice is too small or tastes funny
Ice that has a weird taste or ice cubes that come out too small could be caused by the water line, or food odors from your freezer being absorbed b...
Cause1. Water valve
in determining whether our water valve is working properly or not is check your water supply:
Cause2. Ice maker
it’s where the ice is made inside the refrigerator, there are several different styles of ice makers the most popular
Method1
your meter automatically detects whatever ohms are coming in, but you may need to set your meter to read the proper ohm level.
Method2
a lot of the newer style ice makers both flex tray and Half Moon have a test procedure to determine if the ice maker is bad.
Cause3. water filter assembly
the water filter assembly filters the water as it comes into the fridge.
Cause4. Water lines
the water lines and connectors carry water throughout the refrigerator the water lines and connectors are all made out of plastic.
Bonus tips
the amount of food in a freezer can affect the production of ice, more food in the freezer allows temperatures to be more stable.
Why is my ice maker not working?
What causes an ice maker to stop working? There are several reasons you may find your ice maker not working all of a sudden, including a blocked water dispenser, issues with your water supply line, or a clogged water filter.
Why is my ice maker not making enough ice?
There could be several reasons your ice maker might not be making enough ice, including low water pressure or a kink in the water line. To check if that may be the case, follow the steps below. Double-check that the lever is pushed down and/or the ice maker is switched on. Unplug your refrigerator. Cut off the water supply.
What does it mean when water leaking from the ice maker?
Leaking into Freezer or On Floor. Water leaking from the ice maker could mean that either your refrigerator or ice maker isn’t level. A faulty water line could also be responsible. Level your refrigerator if you find that it’s unlevel or wobbly.
Why does ice taste so small?
Ice that has a weird taste or ice cubes that come out too small could be caused by the water line, or food odors from your freezer being absorbed by the ice. Check your water line and look for any kinks, bulges or damage. If you see any, you’ll need a replacement.
How to get ice out of a fridge?
Remove the ice bin to see if there’s ice accumulation. Remove any blocked ice by carefully chipping at it with a plastic knife. If the ice is too large, you may have to let the ice melt by defrosting your fridge. 2.
Can an ice maker make ice?
Your ice maker won’t make any ice if the temperature exceeds 5ºF. Learn more about the best refrigerator and freezer temperatures with this guide. If your freezer has an arm lever, make sure it’s pushed down. If the arm is up, your ice maker won’t make any new ice.
Is the ice maker turned on?
Verify that the ice maker is turned on. If the ice maker’s water supply is not connected to water supply line, turn the ice maker off. If the ice maker is on, but disconnected to water supply line, the following could happen:
Is the ice maker jammed?
First, ensure that ice is not jammed in the ejector arm of the ice maker. Remove jammed ice from the ejector arm using only a plastic utensil so the ice maker is not damaged. This will likely resolve the issue.
Does your water filter need to be replaced?
A clogged or incorrectly installed water filter will reduce the water flow to the ice maker and could cause thin, low or no ice production.
Was the water system flushed after filter installation or replacement?
Flush the system is needed every time the filter is changed or once the refrigerator is installed to the water supply line for the first time. Air in the water system may cause dripping at the dispenser or small/hollow ice cubes.
Check the water supply line
When checking the water supply line, ensure the water supply is properly connected to a cold water supply and the water shutoff valve is fully opened.
Why is my Maytag ice maker not working?
Another possible cause for a Maytag ice maker not working is that the freezer temperature isn’t set properly. Make sure that the temperature inside the freezer compartment is set somewhere between 0°F – 5°F. If the freezer temperature is set correctly but is still not getting cold enough, you may have dirty condenser coils.
What happens if your ice maker is turned off?
You’re not alone! If the power to the ice maker module is turned off or disconnected, it won’t be able to produce ice.
Does Maytag refrigerator have ice?
Nothing beats the convenience of having fresh ice on-demand. Unfortunately, even top refrigerator brands like Maytag can develop issues that prevent ice from being produced or dispensed.
Do you need to replace the water filter on an ice maker?
Water Filter Needs to Be Replaced. The water for your ice maker and dispenser first runs through a water filter to be purified. Refrigerator water filters can become clogged though if it’s bee too long since your last replacement.
1. Freezer Temperature is too High
Your ice maker is not working the way it should be. The temperature in your freezer is too high, and you should make sure your condenser coils are clear and the fan is working. If you need to keep your food and drinks cool and fresh for longer, ensure that the temperature in your freezer is set between 0 and 5 degrees Fahrenheit (-18 to -15C).
2. Ice maker is Not Turned ON
Even though the Maytag fridge has a built-in ice maker, not every model is set up the same way. The best resource for figuring out how to turn on your refrigerator’s ice maker is your owner’s manual — each model has an online version that provides troubleshooting solutions and instructions for any issues you run into.
3. Control Arm Issue
If you see ice in your ice molds, it’s likely that the issue isn’t with your water supply. Instead, it’s most likely due to a mechanical or electrical malfunction with your refrigerator.
5. Faulty Water Inlet Valve
The water inlet valve is essential to making ice. If it’s not working, there’s no ice to make. It’s easy to determine if the water inlet valve is defective or if the pressure is insufficient — it simply won’t allow water to flow through. If there’s no water, there’s no ice, which means you won’t get the satisfaction of an iced beverage.
6. Defective Door Switch
Many issues can arise when an ice and water dispenser doesn’t work — but fortunately, the solution is easy to identify! The door switch is a mechanical sensor made up of two components: an arm and a lever. If the ice and water dispenser isn’t working, check that the door is closed all the way.
7. Clogged Water Filter
Filters in your refrigerator or freezer can be dirty and clogged out of the box, preventing water from flowing through for ice production. This will stop the ice maker from producing ice. If this is the issue, don’t worry — most models of Maytag fridges and freezers come with a filter that can be cleaned and replaced.
8. Icemaker Mold Thermostat Not Working
The icemaker mold thermostat monitors the temperature of the ice mold (ice tray). Once the mold reaches the proper temperature, the icemaker ejects the ice cubes and refills the ice mold with water. If the mold thermostat is defective, the ice maker will stop making ice.
This Guide Works For Most Maytag Fridge Models, Including
- 12001294 12001302 ERCQ24-001A/P55420-3C ERCQ30-001A/P55420-4C ERCQ36-001A/P55420-5C ERCQ42-001A/P55420-6C MFD2560HES MFD2561HES MFI2269VEM10 MFI2568AEB MFI2568AES MFI2568AEW MFI2569VEM1 MFI2569VEM2 MFI2569VEM4 MFI2569YEM0 MFI2570FEZ06 MSD2454GRW MZD2766GEB MZD2766GES MZD2766GEW
Step 1 – Get Prepared
- Before removing the old ice maker, you can do a few things to get prepared, which will make removing the old ice maker easier. Here are a few good tips: 1. Unplug your fridge. Alternatively, you can turn off the circuit breaker that supplies power to your fridge. 2. Next, turn off the water supply to the ice maker so that water can’t leak out when you’re removing the old ice maker and i…
Step 2 – Remove The Old Ice Maker
- The first thing you need to do to remove the old ice maker from your Maytag fridge is to take off the ice maker unit’s front panel. You can do this by removing any screws that hold it in place. It...
- Once the front panel has been removed, disconnect the wire harness plug that connects the ice maker unit to the freezer.
- The first thing you need to do to remove the old ice maker from your Maytag fridge is to take off the ice maker unit’s front panel. You can do this by removing any screws that hold it in place. It...
- Once the front panel has been removed, disconnect the wire harness plug that connects the ice maker unit to the freezer.
- The ice maker unit is just one complete unit, so you don’t have to take it apart bit by bit. If the ice maker is still held in place by any mounting brackets, remove the remaining screws and then t...
Step 3 – Install The New Ice Maker
- Start by taking the new ice maker out of its box. Then get the wire harness plug ready to be plugged in and make sure you have all of the screws to reattach the new ice maker.
- Place the new ice maker unit in the freezer in the correct position. Then reconnect the wire harness and return it to the correct slot in the freezer.
- Next, secure the new ice maker in place by reattaching the screws in the mounting brackets.
- Start by taking the new ice maker out of its box. Then get the wire harness plug ready to be plugged in and make sure you have all of the screws to reattach the new ice maker.
- Place the new ice maker unit in the freezer in the correct position. Then reconnect the wire harness and return it to the correct slot in the freezer.
- Next, secure the new ice maker in place by reattaching the screws in the mounting brackets.
- Once the ice maker unit has been installed correctly, the next step is to reattach the front panel. Make sure you secure the front panel in position with the screws that you removed earlier.
Step 4 – Test The New Ice Maker
- Now that the new ice maker has been installed, the final step is to make sure it’s working correctly. Start by plugging your fridge back in or turning the circuit breaker back on.
- Next, turn the water supply to the ice maker back on.
- Let your fridge run for 1 hour or so and then check if the ice maker is working correctly. If so, your new ice maker has been successfully installed.