How to Fix Your Tape Measure
- Step One: Open the case and keep your finger or a piece of masking tape on the top.
- Step Two: Dust the inside of the case while it’s open. You can use compressed air or a microfiber cloth.
- Step Three: Figure out the problem. It might be your tape measure needs a new screw or maybe it’s just unhinged.
- Step Four: Carefully remove the tape from the spring if you’re still having trouble.
- Step Five: Replace the spring with a new one. This should be available at any hardware store, but call the manufacturer if you’re not sure what you need.
- Step Six: Connect the tape to your new spring.
- Step Seven: Screw the case onto the back of the tape measure.
- Step Eight: Test your tape measure to make sure it’s working properly.
How to fix a broken tape measure?
It’s pretty easy to fix a broken tape measure. Keep your frustration at bay and just follow these eight simple steps! Step One: Open the case and keep your finger or a piece of masking tape on the top. Step Two: Dust the inside of the case while it’s open. You can use compressed air or a microfiber cloth. Step Three: Figure out the problem.
How do you test a tape measure?
Step Eight: Test your tape measure to make sure it’s working properly. Use the right screwdriver, either a Philips or flathead, and open the back of the case. Be careful to not let the tape fall out and unwind by keeping your finger or a piece of masking tape on the top.
Why is my tape measure unhinged?
If the spring inside of your tape measure is unhinged, you might need to just readjust it or that dust could’ve been clogging things up. Worst case, the spring is completely broken and you need to replace it.
How do I replace the spring on my tape measure?
You can purchase a new part at the same store you bought your tape measure from. Make sure you have the model number and size when you go to the store to get the exact fit. After replacing the spring, connect the tape to the spring by putting the end of the spring into the hole at the start of the tape.
How do you fix a broken tape measure?
0:0810:05Repairing a Broken Tape Measure Stanley - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut there's always just a couple screws around the outside sometimes they're under if there's aMoreBut there's always just a couple screws around the outside sometimes they're under if there's a rubber protective cover. But pull that off we got the inside. Right here up there goes in the spring.
How can I fix my cheap tape measure?
0:168:06How to fix a tape measure - YouTubeYouTubeStart of suggested clipEnd of suggested clipWay on the back side of it the non logo. Side this should be a screw or several screws for theMoreWay on the back side of it the non logo. Side this should be a screw or several screws for the bigger ones in this case that's a 12 footer. So it's got one screw right in the middle.
How do you fix a lock on a measuring tape?
0:002:06Stanley LeverLock measuring tape fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you unscrew those three. And then of course you just take the back cover off keeping a finger onMoreSo you unscrew those three. And then of course you just take the back cover off keeping a finger on the tape measure itself because it is on the spring the whole tape measure is basically a spring.
What kind of spring is in a tape measure?
Power springs are used for retracting applications such as seat belt webbing, tape measures and dog leads, seat recliner, window regulator mechanisms etc.
What's inside a measuring tape?
0:516:08What's Inside A Tape Measure??? - YouTubeYouTubeStart of suggested clipEnd of suggested clipPretty simple right there. The clip spring inside stressed spring inside says. So if we fold a foot.MorePretty simple right there. The clip spring inside stressed spring inside says. So if we fold a foot.
How do you retension a Stanley tape measure?
2:383:39Stanley FatMax Tape Measure Fix - ReTension Your Tape Measure..!!!YouTubeStart of suggested clipEnd of suggested clipAnd get just enough tape out to where you can pass over all of the plastic. Parts and you just wannaMoreAnd get just enough tape out to where you can pass over all of the plastic. Parts and you just wanna rotate it around. Once. Making sure to push down on this white reel the whole.
How does measuring tape retract?
2:203:00Inside the Humble Tape Measure - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt turns into a powerful spring that winds more tightly as the blade slides out. But release theMoreIt turns into a powerful spring that winds more tightly as the blade slides out. But release the lock. And the spring recoils to retract the blade in the blink of an eye.
How do you fix a hyper tough tape measure?
Step Eight: Test your tape measure to make sure it's working properly.Open the Case. Use the right screwdriver, either a Philips or flathead, and open the back of the case. ... Dust Inside. ... Figure Out the Problem. ... Remove the Tape. ... Replace the Spring. ... Put the Tape Back. ... Close the Case. ... Get to Measuring.
How do you clean a tape measure?
KEEP YOUR TAPE MEASURE CLEAN AND COOL Water that gets on the blade of a tape measure can work its way into the mechanism and cause rust. Wipe down the tape after each use with a clean, lint-free cloth.