
How to Repair a Squeaking Microwave Turntable
- Unplug the oven.
- Remove the glass turntable from the oven and wash it with dish soap and water using a scrub brush.
- Remove the turntable guide from the oven and soak it in hot soapy water for 15 minutes. ...
- Wipe the oven floor of the microwave with a soapy rag to remove all food debris. Allow the turntable, the guide and the microwave floor to dry.
- Replace the guide and glass turntable. Plug the microwave in. The next time you use it, listen for squeaking.
Why is the turntable in microwave not working?
To do so, follow the given points:
- Open the microwave door and remove the glass tray and support ring.
- Use a screwdriver to remove the screws from the back side of the microwave.
- Disconnect the wire harness by squeezing the plug and then set the lower panel aside.
- Now Use a screwdriver to pop the terminals off the turntable motor wires.
How to fix a microwave that will not close properly?
How to inspect microwave torsion springs:
- Similar to other inspections, unplug your microwave before beginning.
- Most models have two springs, one on either side. ...
- Visually inspect your springs for any signs of wear, corrosion, or damage.
- If you identify any issues during your inspection, you will need replacement torsion springs.
Why is my microwave not turning?
Try These Fixes
- Drive Motor. ...
- Coupler. ...
- Roller Guide. ...
- Clean the Microwave. ...
- Shut the Microwave Door. ...
- Can You Still Use the Microwave if the Turn Table Doesn’t Spin. ...
- Replace Microwave Turn Table. ...
- You Need to Know This About Your Microwave! ...
- Bottom Line. ...
How to repair a squeaking microwave turntable?
- Unplug the microwave oven’s power cord (for microwaves mounted above a stovetop or range, the cord is normally plugged into an outlet in a cabinet directly above the appliance).
- Lift off the glass tray or plate to access the drive coupling.
- Pull the coupling straight up to detach it from the motor shaft. ...

How do you fix a microwave turntable that won't spin?
Help! My Microwave Turntable Won't SpinUnplug the microwave. Safety first, kids.Remove the glass tray and the circular turntable guide. Wash them both in warm, soapy water to get rid of anything stuck. ... Clean the internal cavity. ... Check that the drive bushing is working. ... Put it back together. ... Test it out.
What causes a microwave turntable to stop turning?
Just as obstructions in the track can stop the rotation, so can broken wheels. If the wheels of your roller guide are broken or have become especially dirty, then your plate may have stopped spinning. A broken roller arm can also be a cause of unbalanced and rotation-stopping forces.
Can I use a microwave without the turntable?
The microwave can be used without the revolving glass tray if the door glass is undamaged. The food won't cook as evenly without the revolving tray and will need to be manually rotates during heating.
How do I fix my microwave turntable motor?
0:191:40GE Microwave Turntable Motor Replacement #WB26X10233YouTubeStart of suggested clipEnd of suggested clipAs with most repairs you should unplug the power cord. First to replace the turntable motor in yourMoreAs with most repairs you should unplug the power cord. First to replace the turntable motor in your microwave oven remove all of the screws securing. The bottom panel. And carefully lower the panel.
How do I know if my microwave turntable motor is bad?
0:062:08Top Reasons Microwave Turntable Not Turning - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe motor that rotates the turntable could be defective. You can test the motor with a multimeter toMoreThe motor that rotates the turntable could be defective. You can test the motor with a multimeter to determine if the component has continuity a continuous electrical path present in the motor.
How do you test a microwave turntable motor?
1:092:09Microwave motor How to remove and test How to repair change Replace ...YouTubeStart of suggested clipEnd of suggested clipAnd it's cycling clockwise and now it's going in the counterclockwise direction so this is a goodMoreAnd it's cycling clockwise and now it's going in the counterclockwise direction so this is a good motor. And turn it off and plug my wires. Turn my power back on again. And that's how I test my motor.
What can I use as a microwave plate?
Glass and ceramic dishware are usually safe for microwave use, but there are exceptions like crystal and some handmade pottery. When it comes to glass or ceramic plates, bowls, cups, mugs, mixing bowls or bakeware, you should be in the clear as long as it doesn't feature metallic paint or inlays.
Why do many microwave ovens have turntables?
Many microwave ovens have turntables inside to help cook the food more evenly. If your microwave does not have one, a turntable accessory can be purchased to help prevent hot spots. You can determine where the hot spots are in your microwave by conducting a marshmallow test.
How do you fix a microwave roller ring?
0:051:13Whirlpool Microwave Turntable Support Ring Replacement (Part ...YouTubeStart of suggested clipEnd of suggested clipWill remove a glass tray and simply lift the old turntable support ring over discard. Take our newMoreWill remove a glass tray and simply lift the old turntable support ring over discard. Take our new sport ring simply lay it in place.
How do you replace a microwave turntable coupler?
0:141:15Frigidaire Microwave Oven Turntable Coupler Replacement 5304519346YouTubeStart of suggested clipEnd of suggested clipTray and you can pull the old coupler straight up to remove to install the new turntable couplerMoreTray and you can pull the old coupler straight up to remove to install the new turntable coupler align it on the motor shaft and push.
Are microwave turntable motors interchangeable?
These parts are not interchangeable, the mounting is different in the two different Microwave Ovens.
What happens if your microwave doesn't spin?
If the turntable on your microwave doesn't rotate, the problem may be with the roller guide under the tray. Some microwave ovens with a round glass tray use a motor driven coupler to turn the roller guide that the tray rests on. The roller guide is used to support the tray and to engage the rotating coupler.
Does a microwave plate need to spin?
In order to distribute the waves evenly throughout the cavity, you must control the movement of the food, hence the rotating plate! The rotation of the plate ensures that microwaves spread evenly and that the food cooks simultaneously and uniformly.
How do you replace a microwave turntable coupler?
0:141:15Frigidaire Microwave Oven Turntable Coupler Replacement 5304519346YouTubeStart of suggested clipEnd of suggested clipTray and you can pull the old coupler straight up to remove to install the new turntable couplerMoreTray and you can pull the old coupler straight up to remove to install the new turntable coupler align it on the motor shaft and push.
Do all microwaves rotate?
Most microwaves I've used have a plate at the bottom that rotates when the microwave is running. I presume that rotating helps more evenly heat the food. Interestingly, my microwave rotates by default but has a button you can press to disable the rotation.
Step 1: Degunk and Debug!
If your turntable isn't turning at all, the first thing to verify is that some Moo Goo Gai Pan or some other goo isn't gumming up the works. This wasn't the case for me, but from what I hear it can happen. Just pop the three-toothed gear off the motor as shown in the picture and make sure all is clear. Next, unscrew the bottom panel.
Step 2: Replace, Repair, Reheat and Rejoice!
Ok, now we just have to plug in the replacement motor ...it's a good idea to test it now by running the microwave a bit. It works, right? Yay! Now just screw the motor in place (making sure the three-toothed gear thing fits) (since mine wasn't an exact replacement I had to tweak the tabs that hold the motor in place with some pliers) Screw in the access panel. Now heat up that leftover Moo Goo Gai Pan and Enjoy! Thanks for checking out this Instructable, I hope it was clear and helpful..
What to do if your turntable stops working?
If one fails, then the whole system fails. In order to check all the parts, you will need to unplug the microwave and remove the bottom panel to access everything that you need to.
Why won't my microwave spin?
If the rollers are worn or missing, or the part that connects to the coupler is worn, it can cause your glass tray not to spin at all. This should be checked first because it is also the easiest part to replace. You simply need to take it out and purchase a new one for your specific model of microwave. Sharing.
Why does my microwave make a grinding noise?
In order to rotate the turntable, your microwave uses a drive motor. If your turntable doesn’t work anymore or made a grinding noise at any point, it is likely a motor problem. This part is accessed through the bottom of your microwave and looks like a round disk in the center. If the motor was grinding, it definitely needs replaced.
How does a microwave work?
In order to heat food efficiently, your microwaves uses directed heat waves generated from the magnetron. While the waveguide in the microwave cabinet directs the heat towards the center of the food, that same food needs to be rotated for efficient coverage. This is where the turntable, or rotating glass plate, comes in.
Can you replace a grinding motor?
If the motor was grinding, it definitely needs replaced. However, if you are unsure that the motor is responsible, you can test it at the terminals with a multimeter. Thankfully, this is not a very in-depth repair. You simply need to remove the mounting screws and unplug two wires in order to replace it.
Can you turn a microwave tray if the prong is broken?
However, if a prong is broken off your coupler, it will not be able to turn the tray. In many models, you can simply pull the coupler up from within the microwave cabinet. However, depending on your model of the microwave, you may first have to remove the motor.
What to do if your turntable won't turn?
If your turntable will not turn there are a few possibilities: and they are the control, turntable motor coupler. I will say right up front that the turntable motors go out a lot more than the control in this regard. So if you are uncomfortable with the diagnosing process, check to make sure the coupling isn’t broken or cracked and if it is not replace the motor and most likely it will be repaired. The coupler is the plastic piece that connects the motor to the turntable. This should be the first thing you check because it is easiest to access. Simply remove the turntable and you should be able to pull the coupler off with a screwdriver. If it isn't the coupler follow instructions below.
What to do if your microwave isn't working?
If your microwave turntable isn’t working this repair guide can help. Most microwaves have turntables. A turntable is just a motor that slowly rotates a glass plate in the microwave to provide a more even cook. If your microwave turntable doesn’t work, you are not getting as much performance out of the microwave as possible. However, it will work fair. On some microwaves there is an option to turn the turntable off so make sure it isn’t turned off before trying to troubleshoot. If it isn’t turned, off read each section until your turntable is working again. Sometimes a microwave turntable motor will become noisy and this is covered on this page as well.
Why is my microwave so loud?
The microwave turntable motor and the stirrer motor are the two most likely things that will cause microwaves to become noisy if you are not having problems with it heating. Most of the other things such as the diode, magnetron tube or the capacitor will cause a microwave to become noisy but they will also cause it not to heat.#N#Just to be sure it is not these things, put the microwave on the lowest setting. This will cause the diode, capacitor and magnetron tube to only run about 10% of the time. If the noise is continuous you know the problem isn’t the magnetron tube, capacitor, or the diode. If the noise is only there 10% of the time refer to this page and read about
Can you remove the bottom of a microwave without taking it down?
If you have an over the counter microwave you should be able to remove the bottom of the microwave without taking the microwave down . But disconnect power before doing so.
How to clean a glass turntable?
Remove the glass turntable from the oven and wash it with dish soap and water using a scrub brush.
What does a squeaky turntable mean?
A squeaking turntable isn't a normal microwave operation. A microwave equipped with a turntable has a drive motor in the center of the oven floor that spins the turntable. The turntable is made of glass and has grooves on the bottom of it which seat in the internal grooves of the drive-motor bushing. The outer edges of the glass turntable ride on ...
Can a microwave cause a squeaking turntable?
A microwave oven can cause electrical shock, therefore always unplug a microwave before working on it. A squeaking turntable isn't a normal microwave operation.
