Steps for Replacing Roof Shingles
- Loosen two rows of shingles located immediately above the missing shingle with a crowbar or long putty knife to dislodge sealer strips.
- Remove all leftover pieces of a missing shingle without damaging surrounding shingles; after removal, you should be left with a smooth surface for new shingle application.
- Take measurements of the new shingle and trim as necessary with a utility knife to fit to the correct size.
- Apply roofing cement to the back of the new shingle to secure it in place before nailing.
- Slide the new shingle into the empty location and nail it in place.
- Cover new nails and nail holes with roofing cement to prevent leaking.
- Press top shingles down over the new shingle to seal in place.
- Repeat the process as necessary to repair multiple missing shingles on a roof. Need help with replacing your missing shingles?
How to replace damaged roof shingles?
Part 1 Part 1 of 2: Removing Damaged Shingles
- Use the proper safety precautions. Any time you're getting up on the roof you need to practice roof safety.
- Assess the damage. Find the damaged area of shingles and determine how many new shingles you'll need and the extent of the damage underneath.
- Remove shingles in cool weather. ...
- Loosen the adhesive under the tabs two rows above the damage. ...
How to replace or repair a damaged shingle by roofingintelligence.com?
To fix broken shingles: Gather up your pry bar, hammer, utility knife, replacement shingles, and some 1-1/4-inch roofing nails. Climb on to the roof. Slide pry bar beneath the row of shingles directly above damaged section.
How do you replace roof shingles?
Part 2 Part 2 of 2: Replacing Shingles
- Get the necessary replacement materials. To replace shingles, you'll obviously need shingles to replace the ones you remove and the materials necessary to secure.
- Install the new shingle. Place a new shingle in the same position as the shingle you removed. ...
- Reseal under edges of all three shingles. ...
- Secure other loose shingles while you’re at it. ...
How much to replace shingles?
This requires:
- Replacement of the plywood ( $20 each; typically requires four pieces of plywood) plus labor
- A square of shingles
- Roofing silicone
- Nails
How do you repair missing shingles on a roof?
Slip a flat pry bar under the damaged shingle and press down to pop out the roofing nails.Slide the new shingle up into place. Be sure to align with the shingles of either side.Carefully lift the upper shingle and secure the new shingle with roofing nails.
How do you replace just a few shingles?
1:587:39How to Replace or Repair a Damaged Shingle by RoofingIntelligence.comYouTubeStart of suggested clipEnd of suggested clipOnce you've broken the glue bond. You need to remove all the nails that are holding the shingle downMoreOnce you've broken the glue bond. You need to remove all the nails that are holding the shingle down to do this look under the top shingle and locate the nails. Slide the flat bar under the shingle.
Will roof leak with one shingle missing?
Will your roof leak with just one missing shingle? Maybe. Just because you lose a shingle or two doesn't mean water will immediately drip from your ceiling. However, such a missing shingle could cause issues over time if the surrounding shingles deteriorate from exposure to water, wind and sunlight.
Can you replace part of a shingle roof?
Can you replace shingles in an area that's leaking? Yes, absolutely. But if you're trying to replace a full section or more of your roof, you're throwing your money away.
What does missing shingles mean?
If you see a missing shingle, though, it is probably indicative of an older roof. When you spot a missing shingle, you should have it replaced as soon as possible to prevent any water leaking into the building. A little bit of water could damage the woodwork in that area, jeopardizing the integrity.
What do missing shingles look like?
It will be obvious if a shingle is missing or severely damaged. Just as a missing puzzle piece leaves a gap in a jigsaw puzzle, a missing asphalt shingle leaves a hole in your roof's cover.
Can you repair just a section of a roof?
In the end, if your roof needs just a few shingles replaced or a few minor patches made, you can get a roofer to make those small repairs for you. But, if you need anything more than half of your roof repaired, it's in your best interest to simply re-roof your entire home.
Can you just patch a roof?
Patching can sometimes work, but it poses all of the same issues — and then some — as replacing a few shingles. It's best to call in a home roofing pro and have them perform a thorough inspection to determine if a patch will extend your roof's lifespan without leading to future damage.
Can you repair a section of roof?
If the damage is more significant but confined to one side of the roof, partial reroofing is an option that will cost thousands of dollars less than doing the entire roof. Repairing a section of roofing will also make it easier to blend new with old, because slight color differences will be less noticeable.
How do you replace a single 3 tab shingle?
4:528:15How To Replace One Shingle [3-tab style] - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo in your case you may have to trim yours offer use - to take up the space you're trying to take upMoreSo in your case you may have to trim yours offer use - to take up the space you're trying to take up. So basically slide it into position.
How do you remove sections of shingles?
1:176:24How to Take Up Some Shingles Without Damaging Them So They ...YouTubeStart of suggested clipEnd of suggested clipGet out the nails from the top row you can lift out each one of these shingles once you get theMoreGet out the nails from the top row you can lift out each one of these shingles once you get the first row out up high these walls just come out really really easily.
How do you replace a tab of shingles?
1:132:34How to quickly replace a single tab shingle that the wind has broken off ...YouTubeStart of suggested clipEnd of suggested clipSo tuck it up under there. Press it down now when that gets weathered. It will fade a little bit andMoreSo tuck it up under there. Press it down now when that gets weathered. It will fade a little bit and blend in with the rest of the roof and from the road it won't be so noticeable.
How do you blend old shingles on new roof?
The easiest way to tie in the new shingles with the old is with a cut valley (see Four Ways to Shingle a Valley). After the addition roof is framed and sheathed, snap a line on the existing roof shingles 2 in. up from the valley center, and cut through the shingles and underlayment.
How old should a roof be to replace shingles?
If your roof is more than 20 years old and most of the shingles are damaged or badly worn, it’s time to replace it. But if your roof is basically sound and is at a relatively shallow pitch that you’re comfortable working on, you can probably handle most repairs yourself.
How to camouflage a roof?
It's easy to camouflage: Check the gutter for an accumulation of colored granules that have washed down the roof from the shingles. Then gather some into a small cup and sprinkle them over the sealant to mask the repair.
How many steps does it take to replace asphalt shingles?
However, there may be the odd occasion where a little fix is needed, and, fortunately, asphalt shingles can easily be removed and replaced in just seven steps.
Why do roof shingles have two rows of nails?
This fact, that each shingle on a roof is actually held in place with TWO rows of nails, is a key factor in the overall roof system’s wind resistance.
Can you break a sealant bond on a shingle?
Once the sealant bond is broken on the target shingle, the same bond will need to be broken on the overlying shingle or shingles, so they can be gently lifted to expose the nails in the target shingle.
Can you remove nails from a shingle?
Sometimes the nails can be removed by direct access, but often trying to pry out the nails from above the shingle can damage the shingle’s granular surface. It is therefore better to lift the shingle AND the nail at the same time, so you’ll need to access the bottom of the target shingle.
How to get up on a roof?
Any time you're getting up on the roof you need to practice roof safety. Wear protective eyewear, heavy-duty gloves, and gripping boots appropriate for walking on the roof. Preferably, you'll also install roof jacks to have something to stand on, and harnesses to protect yourself.
Who owns Bumble Roofing?
This article was co-authored by David Bitan. David Bitan is a roofing professional, licensed contractor, and the owner and founder of Bumble Roofing based in Southern California. With over 12 years of construction industry experience, David specializes in restoring, repairing, and maintaining residential, commercial, and industrial roofs. With over 60 years of combined experience, Bumble Roofing provides easy, friendly services to structures including residential, commercial, industrial, multi-family, and government buildings along with hospitals, hotels, and churches. This article has been viewed 323,479 times.
Can shingles cut into a roof?
Damaged shingles can seriously cut into the life of a roof. To keep your house secure, it's important to regularly evaluate and replace damaged shingles to make sure your home is safe and dry. [1] Roofing Contractor & Maintenance Professional Expert Interview. 14 July 2020.
Can you salvage shingles?
If the shingles are severely damaged, don't try to salvage them. Just remove them and replace them with new shingles of a similar style to the rest of the shingles on the roof. Continue removing the damaged shingles until you've cleared out the shingles that will need replaced.
Do you need to buy a shingle before nailing?
If you buy unbacked shingles, though, you might need to purchase additional adhesive to secure them to the roof before nailing them. It's a good idea to buy it to secure other loose shingles anyway. Roofing nails.
