Repairing Guides

how to repair mobile home interior walls

by Julius Schultz Published 3 years ago Updated 2 years ago
image

How to Fix Holes in Mobile Home Walls

  1. Repair holes to the walls that have been damaged near the bottom of the wall by covering with them with fiberglass drywall tape and coating with drywall compound.
  2. Fill holes in the walls caused by hanging pictures with a putty stick, available at home supply stores.
  3. Remove sheets of damaged paneling by removing any strips (battens) that cover the seams where paneling is joined.
  4. Install new paneling by applying adhesive to the studs, then attach the paneling. Use paneling nails at the seams and into the wall studs.
  5. Repair smaller holes in mobile home drywall paneling by applying fiberglass tape. Apply two to three coats of drywall compound.
  6. Cut out a section of drywall paneling around larger holes and patch with a new piece of drywall. ...

Part of a video titled How To Replace A Wall Panel In Your Manufactured Home
0:23
1:30
Step 2 prepare the wall for the new panel. Using a putty knife chip away the excess glue to ensureMoreStep 2 prepare the wall for the new panel. Using a putty knife chip away the excess glue to ensure you have a tight seal on the repair. Also remove any other debris fasteners.

Can you remove interior walls in a mobile home?

Mobile Home Wall Removal. There is an order in which you should remove interior walls: Shut off water and electricity (even in neighboring rooms) Test for plumbing and wiring. Remove battens and trim. Deal with flooring as needed. A little bit at a time, remove the wall. No framing or studs should be touched yet.

Can you change the walls to a mobile home?

Turn the utility room into a small studio. It’s quite easy to change the space dynamics in a mobile home to help your repurpose along, which we’ll talk about next. Many people think at first that mobile homes can’t take the removing/adding of walls. Actually, it’s much easier, cheaper, as long as you know what you’re doing.

How to hang drywall in a mobile home?

To run down some quick numbers:

  • Screws: 1 for every square foot of drywall you hang (Type W for wood, Type G for gypsum, or Type S for steel depending on your installation). ...
  • Joint Compound: 1 gallon for every 150 square foot of drywall (give or take)
  • Tape: For every 500 square foot of drywall you will need about 200 feet or so of joint tape.

How to repair roof rust on a mobile home?

Self-Adhering Tape is Step 1 in a 3-step process.

  • Step 1a: Clean surface with a non-residue cleaner such as One-Step Roof Prep
  • Step 1b: Place Self-Adhering Tape over leak area
  • Step 2: Spray repair area with Roof Repair Flexible Sealant
  • Step 3: Topcoat roof with Roof Repair Silicone Coating

image

How do you fill holes in a mobile home wall?

Cut out a section of drywall paneling around larger holes and patch with a new piece of drywall. Apply fiberglass tape around the edges of the patch and apply drywall compound. Sand between coats of compound. Prime the patch and paint.

What are mobile home interior walls made of?

Manufactured homes usually use vinyl-on-gypsum (VOG) wall panels rather than standard drywall. Instead of using tape to cover the seams, as is done with drywall, the joints are covered with batten strips during assembly.

How do you fix a hole in a mobile home paneling?

Manufactured Home Wall Repair PatchStep 1 - Sand lightly around damaged area of wall.Step 2 - Apply spackling compound to back of match.Step 3 - Place patch over damaged area.Step 4 - Spread compound over patch, then let dry.Step 5 - Sand, then apply texture or paint for desired appearance.

How do you fix the seams in a mobile home wall?

3:548:25How to Cover Mobile Home Seams | Drywall Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know every seam was only it was tiny. And with the drywall tape you want to cover that. Up. SoMoreYou know every seam was only it was tiny. And with the drywall tape you want to cover that. Up. So you start with the 10 and then finish with the 12.

How thick are old mobile home walls?

Many mobile homes have wall material that is 1/4″ to 3/8″ thick. there generally is not enough strength in this material to support the weight with drywall anchors alone.

What thickness Sheetrock is in mobile homes?

Mobile homes are designed to be light, but the walls still have wooden studs and manufacturers will often use 1/4-inch paneling to cover the framing. The wall studs are spaced to support 4-by-8 panels, so the mobile home drywall, which comes in 8ft by 4ft sheets, should be no problem to install.

How do I fix my trailer wall?

0:4714:38How to repair trailer walls with the Quick Patch System - YouTubeYouTubeStart of suggested clipEnd of suggested clipLots of load locks will help keep the new panels in place until adhesive sets up for faster resultsMoreLots of load locks will help keep the new panels in place until adhesive sets up for faster results build wall presses out of half-inch plywood panels.

How do you cover holes in a trailer?

0:497:14I Put a HOLE in My Trailer - YouTubeYouTubeStart of suggested clipEnd of suggested clipTape.MoreTape.

How do you fill holes in paneling?

Use a putty knife and apply spackling or caulk to fill nail holes. Scrape off any excess. Allow to dry until hard. Tip: If your paneling has groove lines, fill these in using a caulk gun for a smoother painted surface.

How far apart are interior studs in a mobile home?

How thick are manufactured home interior walls? Per HUD Code, our interior wall studs are typically constructed with 2x3” or 2x4” lumber and spaced at 16” or 24”. ³ These studs are framed on 16” or 24” centers with door and window openings that have structural headers for functionality and additional strength.

Why do mobile homes have wall strips?

Mobile homes are made with pre-wallpapered dry wall, then matching strips are made to hide the gaps, because they're made as quickly and cheaply as possible. Plus moving a house creates all kinds of problems, so this also helps to eliminate cracking of dry wall compound in said joints.

How do you cover paneling joints?

Use a color, such as black, that matches the edges of the panels. If you plan on covering paneling with fresh drywall, you can stick mesh drywall tape over the seams to hide them. Spread joint compound over the tape before painting. Repeatedly painting over paneling won't cover the seams.

Do mobile homes have plywood walls?

The exterior sheathing of a mobile house trailer is the material between the wooden studs and the home's exterior siding. The sheathing is typically plywood or oriented-strand board, also known as OSB.

Can you replace mobile home paneling with drywall?

Single-wide mobile homes are designed to be light, but the walls of most of them still contain wooden studs. Manufacturers often cover the walls with 1/4-inch paneling, but the studs can support drywall, so there's nothing preventing you from removing the paneling and replacing it.

How are mobile home walls constructed?

Mobile home walls are constructed much like the floors. They consist of a framework, usually in H-shapes, of wooden joists and supports. The space in between these joists forms cavities that are also used for insulation material. Both the interior and exterior of the walls are then covered in panels.

Is drywall too heavy for mobile home?

Drywall that is 5/8″ thick is, of course, a little heavier, at 2.31 pounds per square foot or 73.92 pounds per sheet which is entirely too much for mobile home ceilings.

How to get replacement wall panels?

To get a replacement wall panel that matches your home’s current panels, contact the manufacturer of your home. The manufacturer will be able either to provide you with a replacement panel from the same series or the closest available equivalent. Keep the serial number of your home handy during this process so that the manufacturer can track your ...

What are wall panels made of?

The wall panels of a manufactured home can be made from several different material types, including drywall, porcelain tile, artificial wood and many others. The most common wall panel material in today’s manufactured homes is vinyl on gypsum, or VOG board. VOG panels are a widely used and cost-effective building material used in manufactured ...

Where is the serial number on a manufactured home?

The serial number is located on your manufactured home data plate, which you’ll typically find inside a cabinet, closet or utility area somewhere in your home.

Is it a good idea to hire a professional for manufactured home repairs?

It’s never a bad idea to hire a professional for manufactured home repairs, but many homeowners choose to go the DIY route, as it can be a substantial money saver. However, not all manufactured home repairs are DIY-friendly, so it’s important to know which ones should be left to the pros. Fortunately, replacing a wall panel is one ...

Can you replace wall paneling?

Fortunately, replacing a wall panel is one of the easier manufactured home repairs to DIY. The process is relatively simple, and the tools and materials are readily available from any hardware store. (Note, however, that some types of wall paneling, such as porcelain tile, are more difficult to replace than others.)

Can gypsum board crack?

The gypsum board in VOG panels stands up to everyday bumps well enough, but heavier impacts can cause the boards to crack. Other wall panel types can also suffer damage, too, so any manufactured home owner should have some basic knowledge of the procedures for replacing a mobile home wall panel.

Can I do mobile home wall panel replacement myself?

While it’s always a good idea to hire a professional for mobile home repairs to do the job, many homeowners prefer to save money by doing the work themselves.

How to fix holes in mobile home walls?

There are many ways to fix ugly and frustrating holes in your mobile home’s walls. Mobile homes use a different type of drywall and panels than standard houses. They are typically thinner and less brittle than regular houses. The walls are more susceptible to damage by pets and children. These steps will make your walls look amazing again.

How to repair gaps in mobile home walls?

If the walls are sealed, mobile homes can be snug and comfortable. You can let cold air in through holes in your walls, while warm air escapes. Near windows and near pipes close to the ceiling are two places where voids are common. Caulk is mostly used to seal the gaps and improve the insulation properties of your mobile home.

How to Remove Smoke from Mobile Home Walls?

Mobile home walls are susceptible to grease and smoke residue. The coating, which is usually yellowish or dark in color, can make your walls look dull and dirty. You can clean the smoke off your walls and restore their appearance with common household items.

Conclusion

Mobile homes are generally built-in controlled areas and are therefore more affordable. These homes are also semi-permanent. It is also very sensitive. Therefore, modular home repair is often needed. These methods will save you a lot of money on repairs.

How to get drywall putty to dry?

Follow manufacturer instructions about how long the putty takes to dry. Once it is set, you need to sand down the surface. Use fine-grit sandpaper to get it smooth. Look at the section on fixing cracks in your drywall for the appropriate waiting time.

Why does drywall crack?

These cracks are usually caused by some kind of stress, like temperature fluctuations or too much pressure on the joints.

How much does it cost to install drywall?

Overall, this not only requires more skill, but it is more expensive too. It will cost you around $40 to $60 per square foot to hire an expert.

Do you need to replace drywall if it is wide enough?

You need to follow an entirely different method for larger holes. If it is wide enough, you will need to replace a piece of the drywall .

Is drywall a durable material?

But nothing is impervious. Drywall is one of the most commonly used materials by companies for their mobile home walls .

Can you use putty to seal seams?

On the other hand, it can be trickier to work with because the material is thicker and harder. And you can’t use it to seal seams. The best solution might be to work with a combination of the two. Primarily, it comes down to your preference.

Can holes break through walls?

Sometimes the holes don’t break through completely. Instead, you can end up with a dent in your wall. This can be just as unattractive. Besides this, just like holes, the damage can spread and become worse.

Step 1

Repair holes to the walls that have been damaged near the bottom of the wall by covering with them with fiberglass drywall tape and coating with drywall compound. Then install a wider-than-original baseboard.

Step 2

Fill holes in the walls caused by hanging pictures with a putty stick, available at home supply stores. The sticks come in a variety of colors and will match most paneling. Open the stick, which resembles a large crayon, and apply to fill the hole; this may require several applications to completely fill, depending upon the size of the hole.

Step 3

Remove sheets of damaged paneling by removing any strips (battens) that cover the seams where paneling is joined. Use a pry bar to pry the damaged paneling loose from the wall. Remove any remaining nails from the wall studs.

Step 4

Install new paneling by applying adhesive to the studs, then attach the paneling. Use paneling nails at the seams and into the wall studs. Re-install the batten strips with finish nails.

Step 5

Repair smaller holes in mobile home drywall paneling by applying fiberglass tape. Apply two to three coats of drywall compound. Sand between coats and then prime and paint.

Step 6

Cut out a section of drywall paneling around larger holes and patch with a new piece of drywall. Apply fiberglass tape around the edges of the patch and apply drywall compound. Sand between coats of compound. Prime the patch and paint.

Why is it so hard to understand how a manufactured home was built?

Understanding how your manufactured home was constructed is tricky because builders rarely, if ever, release engineering or construction information for their homes. The manufactured housing industry isn’t known for its customer service.

Why do roof trusses go from one height to another?

However, ceilings that go from one height to another on the same wall can be a sign of a load-bearing wall. That could signify that a shear or load bearing wall is being utilized.

How far up from the floor can you find wiring?

Usually, wiring can be found about 1-foot up from the flooring on the exterior or perimeter walls but interior walls are different. You may find a ton of glue holding the walls to the studs. This image by Instagram user MobileHomer shows the amount of glue used to attach the wallboard to the interior studs in her home.

Can you leave carpet alone in a mobile home?

If your interior walls sit on top of the floor covering ( and many mobile homes do), you may want to leave the carpet alone. If it’s not too damaged you may be able to get by without needing to replace the flooring. If you are installing new flooring then go ahead and cut the old flooring at the perimeter of the wall so you can carefully pull it pack.

Can you replace floor coverings in a bathroom?

First, in the bathroom on the far left, you can see the flooring is under the wall so if you remove that wall carefully you may not have to replace the floor covering. The roof and the perimeter of the home are not added until the very end after the interior is close to being complete.

Can you remove walls in a mobile home?

Removing Walls in a Mobile Home – Single Wide. In a single wide mobile home, there are typically very few load-bearing interior walls. In site-built construction, a wall that runs perpendicular to the roof joists may be carrying weight but that isn’t always the case with mobile homes because of their construction.

Did Laurie Beadle fix the hot wire?

Laurie Beadle had new cabinets installed but the installer damaged the wiring in the walls during the process. Luckily, they smelled the hot wire and was able to fix the issue. You can see where they cut the section of the wall out to find the damaged wiring. Had the installer checked for wiring first this issue could have been avoided. This image shows what the interior of a mobile home will look like and how the insulation may be covering the wiring.

What is a mobile home wall?

Mobile home walls come in many different materials which can change the way your living room looks, regulate the temperature of your house and affect how easily it can be repaired or replaced. What type of wall is ideal for you will depend on many factors like the size of your house, your budgetary constraints, and the place where you live.

What is the best material to use for mobile home walls?

Ceramic Tile Walls. Ceramic til es are a popular material used to finish mobile home walls thanks to its durability and visual appeal. Ceramic tiles come in many shapes, sizes, colors and designs, which gives decorating enthusiasts plenty of options to use when designing their homes. Image Credit: Tileideaz.com.

Why are ceramic tile walls so hard to move?

Perhaps the biggest drawback to ceramic tile walls is that they are difficult, if not impossible, to transport. Being so hard they have a tende ncy to break if the wall is experiencing too much vibration, like that caused when removing a wall or when a truck is towing a mobile through a difficult road.

What is drywall made of?

Drywall is another popular material which can be found in many homes, mobile or not. Drywall panels are made using gypsum plaster which is then pressed into a vertical frame to make a drywall. This type of wall evolved as a simpler, quicker alternative to the traditional lath and plaster walls. While a plaster wall may take up to a week to get dry, even an amateur carpenter can set up a drywall and have it ready in two days.

What is artificial wood paneling?

Artificial Wood Paneling. Older manufactured homes that were built around 1960 and 1970 tend to be built with artificial wood paneling. These mobile homes were the type that went up like tinder boxes, before industry standards were in place. Image Credit: Houzz.com. Artificial Wood is a composite material made using wood byproducts, ...

Why do we need a dry wall?

Drywalls keep the house insulated from the outside which translates into a cooler house during the summer and warm during the winter. Drywalls are also an economic option, being simple to maintain and repair because you can take out the section that needs to be replaced instead of having to replace the entire wall.

Why are mobile homes so popular?

Mobile houses are a great place to call home. Whether it’s because of their affordable prices , with its typically low-maintenance nature and reduced property taxes, or because they give owners the ability to pack their houses and move across the country without the size limitations of a camper or an RV, mobile houses are becoming an increasingly ...

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9