How to repair a bad mobile home subfloor?
The process of repairing a bad mobile home subfloor is not difficult, but it should be done with care to achieve the desired result: Determine the area to be repaired; Remove the damaged portion of the subfloor; Attach floor joist supports for subfloor replacement; Replace subfloor with new material; Level new subfloor area
Should I repair or replace my mobile home roof?
You should never wait to repair a mobile home roof. Even the smallest water leak can cause unbelievable damage in a short amount of time. If you have a leak in your roof, find and fix it ASAP! The water can spread unpredictably. If you find water damage in one place, that doesn’t necessarily mean that the leak is directly overhead.
Do you have soft spots in your mobile home floor?
I’ve walked many mobile homes as potential flips or investments. Usually, every home more than 10 years old has developed a soft spot or two in the floor. If these are not repaired properly, they will often visually show up in the floor. Even worse is the feeling of sponginess as you walk across them.
What do you need to repair a mobile home attic?
In addition to repair articles, you’ll also find some posts to help you tackle other problems, including a few you might not quite call “repairs.” Provided that most mobile home attics don’t have any easy access point, you may need some 2x4s, screws, and nails to get in there.
How do you repair a rotten floor in a mobile home?
6:4914:44How to repair a rotted mobile home floor Single Wide Mobile ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou see this 1 by 8 runs down that side there so we don't have to do a bunch of framing over hereMoreYou see this 1 by 8 runs down that side there so we don't have to do a bunch of framing over here which is a good thing. All we need is to make sure that our plywood breaks.
What kind of sub flooring is in a mobile home?
particleboardMobile homes and manufactured homes, for many years, constructed subflooring consisting of a glue and sawdust combination referred to as particleboard. Unfortunately, when it gets wet, it acts like a sponge.
How do you fix a soft spot in a mobile home?
The only solution is to find and fix the water leak and then replace the damaged floor. Novices rarely replace a large enough area and they fail to make sure all the edges of the repair section are supported properly. Many renovators attempt to cut out the damaged particle board and fit in a new piece.
What kind of plywood do you use for a mobile home floor?
The most recommended subfloor material is 5/8″ plywood. If you can afford water resistant marine plywood for your kitchen, laundry, and bath that would be a good idea.
Can I put new subfloor over old subfloor?
Install a layer of at least ½” or preferably 5/8” ply over the existing planks. This is particularly important if your old sub floor has lumps and bumps in it. If you don't respect this thickness of ply, then you're highly likely to see rises and falls in your new flooring.
Can I put new subfloor over old subfloor in a mobile home?
This is not always the case in a mobile home, however, where subfloors may be made of lesser-quality particleboard. Mobile home subfloor thickness may be of some concern, and installing plywood over this subfloor can give you a stronger base for your hardwood, laminate or carpeting.
How do you fix a weak spot on the floor?
Fix bouncy floors by adding bridging, adding a layer of plywood or adding a wall or beam. We'll show you three ways to stiffen up your bouncy floor—by adding bridging, installing plywood along the joists and adding a wall or beam under the floor. Any one of the three can solve your problem, depending on your situation.
How do I fix my soft spot?
0:188:54How To Fix A Rotten Soft Spot In Your Boat's Floor - YouTubeYouTubeStart of suggested clipEnd of suggested clipWherever you have solid floors you may have to use a tool to cut with make sure you don't cut allMoreWherever you have solid floors you may have to use a tool to cut with make sure you don't cut all the way through the hole through the floor of the boat.
How do you fix soft spots on a trailer floor?
1:242:57How To Repair a Rotten Trailer Floor - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I cut it to size. And I want to make sure I got the right cut the first time for the measure ofMoreAnd I cut it to size. And I want to make sure I got the right cut the first time for the measure of several times. And this will several times and cut once. Right just screw it down.
What is the thickness of a mobile home floor?
Most subfloors are either 3/4″ or 5/8″ thick. You will use the measurement to set your circular saw to the proper height. One of the most tedious parts of replacing subflooring in mobile homes is the removal of the original sub-flooring.
Do you nail or screw subfloor?
Ideally, nail down your subfloor using corrosion-resistant nails that will securely hold it in place and last a long time. Screws are a great alternative that you can easily remove, but they are not as sturdy. Screws are superior in terms of reducing floor squeaks, but the installation is slower.
What are 3 common subfloor materials?
Common Subfloor Materials. There are four primary materials used as subfloor: plywood, oriented strand board (OSB), concrete, and high-performance panels. There are other subfloors materials out there, but they are used in more niche situations. The construction industry is constantly evolving.
What are the floors of mobile homes made of?
The flooring of a mobile home is made of several different components such as: wood board frames (floor trusses), installation filling, and a sub floor (made from plywood, particleboard, or oriented strand board). After, carpet, tile, or vinyl is usually installed over.
What is best for sub flooring?
Plywood is considered the most popular material used for subflooring, it has been used since the 1950s and remains one of the top choices for contractors. Standard plywood works perfectly fine as a subflooring material, but the best option is ¾” tongue-and-groove plywood subflooring.
What kind of flooring does Clayton Homes use?
Clayton homes are built from quality, durable materials from trusted brands to make sure they're both stylish and long-lasting. And our floors are no exception. We offer resilient vinyl or linoleum flooring, tile and Shaw® carpet in a variety of styles and finishes to help you personalize your home.
Does wet subfloor need to be replaced?
“Adequately protected from moisture, most subfloor materials can be expected to last for the lifespan of the home.” However, if the subfloor is consistently exposed to moisture, you may need to replace it after 20 to 30 years or sooner.
Can a mobile home stay in good shape forever?
Unfortunately, it can’t stay in pristine shape forever, however much you wish it did. With this in mind, we’re offering you our mobile home repair guide!
Is DIY a possibility?
Given that electrical work can be quite tricky, DIY is still a possibility. However, be careful!
What happens if your mobile home is not in tip top shape?
If it isn’t in tip-top shape, you’ll lose heat in the winter and AC in the summer. It will also mean higher energy costs.
Who won the 2016 Mobile Home Makeover Contest?
Image courtesy of Patricia Pacheco, winner of the 2016 Mobile Home Makeover Contest.
Is a mobile home door the same size as a site built door?
NOTE: Mobile home doors are NOT the same size as doors for site-built homes! In other words, that beautiful door at Lowe’s probably won’t fit your doorway without modification.
Do you have to follow instructions for installing a mobile home door?
For most mobile home doors, installation will be similar to the instructions here. You should always follow the instructions provided with your door.
When repairing a floor, do you want to remove the entire area that feels spongy?
When repairing the floor, you will want to remove the entire area that feels spongy, soft or unlevel.
What happens when you repair a subfloor?
When a damaged subfloor is properly repaired, your new flooring should feel and look beautiful for many years to come. Not having any low spots or soft spots in your new floor makes your home feel solid and of better construction.
Can you repair a mobile home subfloor?
The process of repairing a bad mobile home subfloor is not difficult, but it should be done with care to achieve the desired result:
Can you replace subfloors in a manufactured home?
Once any needed supports for the floor joists are in place, it is time to replace the actual subfloor. Although the subfloor for many manufactured homes is made from pressed board, we like to use a quality plywood for the replacement material.
