Repairing Guides

how to repair moen kitchen faucet handle

by Rogers Erdman Jr. Published 2 years ago Updated 2 years ago
image

  1. Shut off Water Supply. Shut off the water supply for hot and cold water lines of the faucet. Shut off valve will be located beneath the sink.
  2. Cover Sink Drain. To remove the handle, you need to open screws. ...
  3. Remove Moen Faucet Handle. Now main work starts. Find a screw on the faucet handle. ...
  4. Examine the Situation. After removing the handle, you need to find the reason for the hard turn of the Moen faucet handle. ...
  5. Clean or Replace Cartridge or O-rings. Now remove O-rings from the handle. Check rings condition. They can be used again or not. ...
  6. Remove Mineral Buildups and Rust. After removing the cartridge, check mineral buildups inside the handle. To remove it spray white vinegar on it.
  7. Reattach Handle. Now when the handle is properly clean from the inside and also you have changed O-rings, the handle will move freely.

Part of a video titled How to Repair a Leaking Moen Kitchen Faucet - YouTube
0:26
5:29
And there is an allen screw under this that holds the handle in place. There will most likely beMoreAnd there is an allen screw under this that holds the handle in place. There will most likely be thread Locker on this so take your time when removing.

Full Answer

How to tighten a Moen pull out kitchen faucet?

What you need

  • Phillips head screwdriver
  • Flathead screwdriver (or knife)
  • Hex head wrench (also known as an Allen key)

How to take apart a Moen kitchen faucet?

Steps to follow to remove a Moen kitchen faucet:

  1. Turn off water
  2. Drain the pipes
  3. Remove the handle
  4. Remove the dome and plastic sleeve
  5. Removing the handle mechanism
  6. Remove the ring and washer
  7. Remove the spout
  8. Pull out the cartridge

How do you remove a Moen kitchen faucet?

  • remove moen pull out kitchen faucet
  • moen single handle kitchen faucet removal
  • how to remove kitchen faucet from granite countertop
  • how to remove a single handle kitchen faucet
  • how to remove kitchen faucet

How to fix Moen pull out kitchen faucet?

  • Unique and stylish body
  • 3 spray modes available
  • Single-hole installation
  • ADA compliant faucet
  • Reflective mirror-like look

See more

image

How do you take apart a Moen kitchen faucet handle?

Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32" hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.

How do you fix a loose handle on a Moen kitchen faucet?

0:043:47Tighten Loose Faucet Handle and base - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you'll need something like a swiss army knife or a small screwdriver. And right in the back ofMoreSo you'll need something like a swiss army knife or a small screwdriver. And right in the back of the handle. You'll find this tiny little cap and you're just going to very carefully pop it out.

How do you fix a Moen faucet handle?

1:034:07Fixing a Leaking Moen Bathroom Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhile trying not to damage the threads use a small flat-head screwdriver to loosen the cartridgeMoreWhile trying not to damage the threads use a small flat-head screwdriver to loosen the cartridge before grabbing those channel locks again.

How do you take a Moen single handle faucet apart?

0:563:54Repair and Replace (Single Handle | Moen | Bathroom Faucet) - YouTubeYouTubeStart of suggested clipEnd of suggested clipInstead. Now pull off the handle use a Phillips screwdriver to unscrew and remove the handle adapterMoreInstead. Now pull off the handle use a Phillips screwdriver to unscrew and remove the handle adapter. Now pull off the flange. Use the channel lock pliers to unscrew the plastic rate.

How do I fix a single handle kitchen faucet?

0:423:11How to Repair a Leaky Single Handle Ball Kitchen Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You willMoreFirst you will need to turn off the hot and cold water supply valve under the sink. Next. You will need to remove the single lever handle. This may require using an allen wrench to loosen the hammer.

How do you remove a Moen kitchen faucet handle without screws?

You can use an allen wrench (also called an allen key) to remove it. Once you've done that, you can typically just lift the faucet handle off. However, if it has a cartridge inside, you may need to unscrew a top piece as well to be able to remove the cartridge.

How do you take apart a faucet handle?

2:513:44How to Remove a Faucet Handle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgain make sure that the drain is closed or covered. This is a tiny screw.MoreAgain make sure that the drain is closed or covered. This is a tiny screw.

How do you fix a faucet handle that won't turn?

1:464:14Stuck or Hard to Turn Price Pfister Faucet Handle. Easy $0 repair.YouTubeStart of suggested clipEnd of suggested clipIf the hub won't turn the nut may be over tightened causing the hub to be pulled into the surface ofMoreIf the hub won't turn the nut may be over tightened causing the hub to be pulled into the surface of the sink locking it into place try loosening the nut by a hair.

How do you fix a stripped faucet handle?

Here are five easy steps on how to fix the problem.Turn the Water Off. The valves to turn the water off to your sink should be right below the faucet. ... Remove Faucet Handles or Cover Plates. ... Remove Locking Nut. ... Remove Faucet Cartridge. ... Replace the Faucet Cartridge.

How do you remove a screwless faucet handle?

Once you find the necessary tools, you'll need to follow these steps to remove the screwless faucet handle successfully.Step 1: Turn off the water. ... Step 2: Remove the cap on top of your faucet. ... Step 3: Remove the hidden set crew. ... Step 4: Remove the faucet handle. ... Step 5: Rinse off mineral deposits.

How do you disassemble a Moen faucet?

0:565:02DIY: Moen Faucet Cartridge Replacement and DisassemblyYouTubeStart of suggested clipEnd of suggested clipNext using a Phillips screwdriver remove the screw in the center which holds the metal bracket thatMoreNext using a Phillips screwdriver remove the screw in the center which holds the metal bracket that attaches to the handle. After that has been removed now unscrew the black plastic sleeve.

How do you remove a Moen single handle kitchen faucet cartridge?

0:173:19Moen Single Handle Cartridge Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo go ahead and grab your hex wrench and loosen the hex nut and then the handle will just come off.MoreSo go ahead and grab your hex wrench and loosen the hex nut and then the handle will just come off.

How many handles does a Moen kitchen faucet have?

If you're involved with a Moen kitchen faucet repair, and the faucet has only one handle, the job will entail taking the faucet apart. If you're involved with a Moen kitchen faucet repair, and the faucet has only one handle, the job will entail taking the faucet apart.

Why is my Moen pull out faucet leaking?

If you have a Moen pull out kitchen faucet leaking from the base, however, the problem could be that the quick connector between the spout hose and the faucet base is leaking. That isn't supposed to happen, and when it does, it's usually because the connecter wasn't put together properly. Moen's instructions for fixing this problem begin ...

Why does my Moen shower cartridge leak?

But the ones in kitchen faucets are smaller and simpler, and they are usually made of plastic. When the spout leaks, water may be slipping past the O-rings around the cartridge or through the cartridge itself, and when the latter malfunction occurs, it's often because mineral deposits are preventing the cartridge from sealing.

How to fix a Moen hose?

Moen's instructions for fixing this problem begin with finding the tabs or button on the connector and squeezing while you push the hoses together. This releases the connector, allowing you to pull the hoses apart so you can start over. To reconnect the hoses, squeeze the tabs again, push the male end into the female end until the connector clicks and the tabs come out all the way. If the connector has a push button, there's no need to press it. Just listen for the click.

How to access O rings on a faucet?

To access the O-rings, you need to remove the spout. You can do this without removing the valve, although you do have to remove the handle. Once the handle is off, grasp the spout and lift it right off the faucet base, tapping with a mallet if necessary to loosen it.

What does it mean when a faucet swivels?

If you have a faucet that swivels, and it leaks from the base of the spout, the problem may also be worn O-rings, according to Moen's troubleshooting page.

Can you replace a cartridge valve on a Delta faucet?

All Moen faucets, even the two-handled models, have cartridge valves. If the faucet is leaking, you might have to replace the cartridge. But it's also possible that replacing O-rings will stop the leak.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9