how to repair molding on furniture

• Smooth Damaged Molding. If edges of the damaged trim molding are raised, use sandpaper to smooth them. Then you can apply the wood filler smoothly.
• Apply Wood Filler. With your putty knife, apply wood filler. It's better to apply too much than too little. ...
• Sand and Paint. As with any wood project, proper preparation is the key to a good-looking end result so take the time to create a proper finish.

How to fix damaged trim molding on wood furniture?

If edges of the damaged trim molding are raised, use sandpaper to smooth them. Then you can apply the wood filler smoothly. With your putty knife, apply wood filler.

How do you remove mold from wood furniture?

To remove light mold from wood furniture, add cheap vodka to a spray bottle and coat the furniture with it before allowing the piece to air dry in direct sunlight. To remove stubborn mold, scrub the furniture down with a detergent or bleach solution using a stiff-bristled brush.

Should I repair or replace my trim molding?

Because trim molding is often made from softer woods, you can easily damage it. You might damage it by moving furniture or vacuuming. Or a pet could chew or scratch trim molding. Save yourself some money and repair damaged molding yourself, rather than replacing it. Here’s how.

How do you fix a broken mold on a wooden leg?

Use a sharp utility knife to cut a straight edge on the mold (so it can sit right next to the edge of the leg) Smother bondo onto the damaged trim Placed the greased mold over the bondo

How do you replace missing molding on furniture?

3:2617:55How To Reproduce A Missing Molding Or Part On Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd make a couple parts our missing. Okay so this is the piece that we are going to reproduce todayMoreAnd make a couple parts our missing. Okay so this is the piece that we are going to reproduce today and I'm going to be using this silicone putty it's a mold making silicone.

How do you fix wood trim on furniture?

0:018:07Use Hot Glue and Bondo To Fix Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff you are going to need some hot glue. So i'm going to put hot glue. Over top of this trim that isMoreOff you are going to need some hot glue. So i'm going to put hot glue. Over top of this trim that is intact.

How do you repair broken decorative molding?

1:5416:24How To Fix Damaged Baseboard, Crown Moulding And Trim Like A ...YouTubeStart of suggested clipEnd of suggested clipTwo which is using wood filler so there's a lot of different types of wood fillers out thereMoreTwo which is using wood filler so there's a lot of different types of wood fillers out there personally for me i just like using these ones this one's for bigger areas that i need to fill.

Can you patch molding?

If you're working with wood trim or crown molding, you can refinish it to repair scratches and shallow dents. Simply sand down your trim to remove the current stain and to smooth out the damaged areas.

How do you repair damaged wood trim?

Trim Repair: How to Fix and Revive TrimStep 1: Start with a thorough cleaning. Photo 1: Remove old paint spots. ... Step 2: Scrape and sand badly damaged areas. Photo 2: Scrape eroded areas. ... Step 3: Roughen the finish and fill small holes. ... Step 4: Apply stain to hide dings and scratches. ... Step 5: Apply the fresh finish.

How do you fix broken wood trim?

0:332:48How to repair damaged baseboards - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut wood fibers pressed. Together first thing i'm going to do is spread on some joint compound. AndMoreBut wood fibers pressed. Together first thing i'm going to do is spread on some joint compound. And sometimes it's hard to stick. So you might want to just use your fingers to get it into the fibers.

How do you fix MDF molding?

3:177:09How To Repair Water Damaged Baseboard and PREVENT ...YouTubeStart of suggested clipEnd of suggested clipYou can also get away with just a sanding block the sanding sponge will come in handy later on asMoreYou can also get away with just a sanding block the sanding sponge will come in handy later on as you'll see but it's not going to be great for sanding off this damaged.

How do you fill large gaps in molding?

1:403:00How to Fix Large Gaps Using Wood Filler & Why You Should ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a sharp knife to cut the applicator at a 45 degree angle the 45 degree angle on the opening isMoreUse a sharp knife to cut the applicator at a 45 degree angle the 45 degree angle on the opening is used to push the wood filler into the gap rather than have it applied evenly at the surface.

How do you fix a trim that fell off?

0:475:51How To Fix Repair Loose Molding or Trim On Your Car - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut in either situation a lot of times you can get away with using some silicone adhesive threeMoreBut in either situation a lot of times you can get away with using some silicone adhesive three attachments of the body of the vehicle. If there's nothing wrong with the piece of trim or.

How do you fill holes in wood trim?

0:305:10how to fill nail holes in trim - YouTubeYouTubeStart of suggested clipEnd of suggested clipA lot of people like to use caulk. You don't want to use caulk to fill the nail holes. What happensMoreA lot of people like to use caulk. You don't want to use caulk to fill the nail holes. What happens with the caulk is it will shrink.

How do you fill gouges in wood trim?

Clean the area with a damp rag. Remove all the surface dirt and debris but don't saturate with a lot of water. ... Fill the nicks and scratches with wood filler putty. ... Sand the repaired area with 220 grit sandpaper once the putty has dried. ... Stain or paint the area to match the original color.

Is wood filler and wood putty the same?

Wood putty is denser than wood filler, and it's so pliable you typically have to apply it with a putty knife. Like window glazing or plumber's putty, wood putty is a mixture of plastic and oil-based solvents. Because it doesn't harden like wood filler, wood putty won't shrink or crack, but you can't sand it.

How do you make wood trim look good?

0:140:58How Do I Restore Wood Trim? : Woodworking Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's it's gotten scratched. With a little bit of time. And effort you can make it look like newMoreIt's it's gotten scratched. With a little bit of time. And effort you can make it look like new without going to too much trouble.

How do you fix cabinet edges?

0:555:35Fix a Hole or Chipped Cabinet - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you could use paint sticks you could use a tongue depressor. Whatever. You have that's largeMoreBut you could use paint sticks you could use a tongue depressor. Whatever. You have that's large enough to go along this edge.

How do you repair decorative wood?

4:398:49Repair Damaged Furniture from the Thrift Store | Silicone Mold and ...YouTubeStart of suggested clipEnd of suggested clipSo i put a little bit more wood filler in there on the bottom.MoreSo i put a little bit more wood filler in there on the bottom.

How do you fix chewed corners of wood?

6:5511:02How to Fix Chipped Wood Corners - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce you get it all lined up just hold the hot glue mold in that position for a couple of minutesMoreOnce you get it all lined up just hold the hot glue mold in that position for a couple of minutes until the bondo really starts hardening.

What can damage trim molding?

Bowl. Water. Sandpaper. Paint. Because trim molding is often made from softer woods, you can easily damage it. You might damage it by moving furniture or vacuuming. Or a pet could chew or scratch trim molding.

How long does wood filler dry?

If your wood filler is water-based, use a wet finger to smooth the wood filler. Allow the filler to dry for 24 hours. For a smaller area of damage (such as dents and cracks in your trim molding), buy wood putty. To patch larger areas, use an epoxy filler.

The Damaged Dresser Frame

On this dresser, a small amount of trim was chipped off of the structural frame below the drawer.

Missing Trim on an End Table

On this table, part of the detail was chipped off. So we made a mold on the other side of the table leg, put an excessive amount of bondo over the broken area, then squished the mold onto the table.

Missing Wood Veneer

On another dresser, the bottom detail had broken off. For this one, we basically reversed the mold method, and used the mold to create a dam where the bondo couldn’t go.

How to clean mold from furniture?

Prep to clean the mold by moving your furniture somewhere the mold won't spread and vacuuming up loose spores. Clean light mold with sunlight, cheap vodka, and dish soap. Remove stubborn mold with a bleach solution or by sanding the mold out of the furniture. Steps.

How to remove mold from wood furniture?

To remove light mold from wood furniture, add cheap vodka to a spray bottle and coat the furniture with it before allowing the piece to air dry in direct sunlight. To remove stubborn mold, scrub the furniture down with a detergent or bleach solution using a stiff-bristled brush.

How to get rid of mold in a bathroom?

Mold that withstood sunlight and vodka can often be removed with a mild household detergent. Mix dish soap in a bucket of warm water and gently scrub moldy areas with a soft bristle brush with a circular motion.

How to prevent mold spores?

1. Put on rubber gloves, safety goggles, and an air mask. Mold spores can be very harmful to your health, especially if they get into your lungs. To prevent this, whenever cleaning mold you should wear an air mask, rubber gloves, and safety goggles without air vents. [1] X Expert Source Susan Stocker.

How to get rid of mold smell in furniture?

Fight very light mold with sunlight. Very light mold and musty smells can often be eliminated by airing your furniture out in sunlight. Position the furniture outside in the early morning, after the dew has evaporated (if there is any). Bring the furniture back inside at sunset.

How do I get rid of black mold?

You're much better off hiring a professional mold removal service to get rid of black mold. If you do decide to remove it yourself, wear a respirator and seal all areas of your home so that the potentially toxic spores aren't released into other areas of your home. You’ll need black mold removal products, which are easily found in home repair stores. Contrary to popular opinion, bleach does not kill black mold.

How to get rid of mold in a drywall?

In a bucket, mix together a household detergent, like dish soap, bleach, and water. Use a quarter cup (59 ml) of detergent, 2½ cups (591 ml) of bleach, and 5 cups (1.2 L) of water. Stir the solution with a utensil to evenly distribute the ingredients.

What is missing on furniture?

A piece of molding (moulding if you use the English term) or trim is probably the most common missing part on furniture. Furniture detail pieces such as a rosette or applique is not unusual either, especially on vintage or antique furniture.

Can you repair wood furniture with a lathe?

Thankfully, traditional wood furniture repair techniques such as carving and wood turning on a lathe are often times not required In lieu of modern materials and new methods such as mold making compound and casting resin.