
How to Repair Motorcycle Seat Covers
- Prepare. The first step is to tidy the damaged section of the motorcycle seat covers to ready it for repair. ...
- Insert Patch. The spare leather patch can be inserted into the recess created by the damage, which will form a backing for the repair.
- Finish. ...
How to cut down a motorcycle seat?
How to reshape a motorcycle seat
- Using a Kawasaki Ninja 250 as a practical example. See the story if you want to know about my process. ...
- Introduction. ...
- Tools and Materials. ...
- The Process. ...
- Preparing the Seat. ...
- Cutting the Shape. ...
- Fixing Mistakes. ...
- Covering the Seat. ...
- Voila, the Finished Product. ...
How to improve your motorcycle seat?
When shopping for an update, look for motorcycle seats that meet the following criteria:
- Spreads your weight across the entire surface area, eliminating pressure points
- Reduces shock and vibration
- Has proper ventilation, allowing for heat and moisture to disperse properly
- Promotes blood flow, thereby reducing numbness
- Increases stability
How do you repair a motorcycle seat?
- Step 1: Assess Damage.
- Step 3: Remove the Cover and Old Foam.
- Step 4: Clean Up the Seat Base.
- Step 5: Jim Halpert.
- Step 6: Glue the Dense Foam.
- Step 7: Carve the Foam.
- Step 8: Add a Thinner, Softer Foam.
- Step 9: Put the Cover Back, Glue It and You're Done :)
How to recover a motorcycle seat?
Video Chapters:
- Removing Old Cover - 0:42 min.
- Patterning Top Plates - 1:56 min.
- Sewing Plates - 7:35 min.
- Patterning Boxing - 11:31 min.
- Sewing Boxing to Plates - 12:33 min.
- Using Fabric Pulls - 18:11 min.
- Stapling & Stretching Vinyl - 20:47 min.

How do you restore a motorcycle seat?
Here are the steps, just so you're ready.Remove the seat from the motorcycle. ... Take off the old vinyl. ... Measure out your new fabric, cutting it roughly into shape. ... Stretching out the fabric to reupholster the motorcycle seat and staple it down. ... Re-install the seat.
How do you fix a torn seat cover?
Cut a piece of the fabric adhesive that's larger than the hole, then tuck it into the torn area and put the fabric patch on top of it. Follow the directions on the adhesive and use an iron to heat the fabric and the adhesive. They should bond together and the adhesive should stick to the interior of the cloth.
How do you fix foam on a motorcycle seat?
3:0516:06Honda ATV TRX70 Gets a Seat Repair and Seat Cover Upholstery ...YouTubeStart of suggested clipEnd of suggested clipAnd some contact cement you know I've got the spray-on type.MoreAnd some contact cement you know I've got the spray-on type.
How do you fix a stitch on a motorcycle seat?
2:4810:09Leather Seat Stitch Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt all at the same time. And i'll tie off my ends at the very very. End. All right i'm about halfwayMoreIt all at the same time. And i'll tie off my ends at the very very. End. All right i'm about halfway done now once you kind of find a rhythm it goes fairly fast.
How do you repair torn leather?
1:184:35How to - Repairing a Tear in Leather - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a pair of scissors. This makes it easier for the filler to sit flush with the leather. TheMoreUsing a pair of scissors. This makes it easier for the filler to sit flush with the leather. The next stage is to secure the patch in place using the leather glue give the glue a good shake before.
How do you repair torn leather seats?
1:003:07Cracked, Torn Leather Car Seats? Before Expensive Repair, Try a Patch!YouTubeStart of suggested clipEnd of suggested clipSo essentially any place that is shiny around this. Area i want to make sure that it's nice andMoreSo essentially any place that is shiny around this. Area i want to make sure that it's nice and clean dry to the touch. And then we're going to go ahead and put on this adhesive. Patch.
What type of foam is used in a motorcycle seat?
Two types of foam are most commonly used to make motorcycle seats. These are open-cell polyurethane foam and closed-cell polyethylene foam. According to It Still Runs, the main difference between these materials is their chemical composition. The foam is made in single pieces and layers.
How do you fix a foam seat?
1:143:56How to repair your seat with foam - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can get any 3m glue. Right here to be able to do this foam job but basically I'll just take thisMoreYou can get any 3m glue. Right here to be able to do this foam job but basically I'll just take this I'll stuff those in right here like this Spray that pretty good spray.
How do you fix foam?
0:074:15How to repair foam - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut we found a much better solution down which is a lock type product what we found works reallyMoreBut we found a much better solution down which is a lock type product what we found works really well is Loctite 406.
How do you fix a ripped motorcycle seat?
0:243:24How To Quickly Patch a Ripped Motorcycle Seat. and Will it Last?YouTubeStart of suggested clipEnd of suggested clipSo it doesn't get any worse to do this I'm just going to use a master plastic patch. Try saying thatMoreSo it doesn't get any worse to do this I'm just going to use a master plastic patch. Try saying that five times fast. They come in different shapes. Kinds.
How do you sew a ripped seat?
3:0215:32How to Sew and Repair a Torn Seat in a Vehicle - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou've got to have a base. So it's just a matter of coming through and I usually do it here at theMoreYou've got to have a base. So it's just a matter of coming through and I usually do it here at the very bottom where I'm starting at I'm gonna tie knot just below the RIP.
How do you fix a vinyl seat?
2:4710:05How To Repair SMALL Rips & Tears in Vinyl & Leather - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can get really really really picky when you're doing this just depends on how picky you areMoreAnd you can get really really really picky when you're doing this just depends on how picky you are it's tough to get it perfect but we try hard to do that. So you just take your spatula.
How do you fix a big tear in a cloth car seat?
If the tear is larger or not a clean rip, you may want to use a patch to repair the tear. To sew a tear closed, you should do the following: Purchase a curved upholstery needle and extra strong thread that matches the seat. Replace any lost padding with stuffing or foam found at your local crafts store or online.
How do you fix a vinyl seat?
Using Liquid VinylClean the seat area thoroughly with a mild cleaner and towel.Prepare the liquid-vinyl solution. ... Using a sponge, apply the liquid vinyl solution. ... Apply sealant or conditioner as advised by directions on the liquid-vinyl solution.Once the fix is complete, be patient.
How do you fix a torn seam in a car seat?
5:0430:53How to fix a broken seam by hand or with a sewing machine - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou know of the seat that you're sewing up this is size 92 bonded polyester you're gonna need a pairMoreYou know of the seat that you're sewing up this is size 92 bonded polyester you're gonna need a pair of needle nose pliers. And just some scissors now if you don't have any of these supplies.
Step 1: Tools and Materials
New fabric for the seat. It can anything as long as it is thick enough not too stretchy and a little water resistant. I chose brown synthetic leather.
Step 2: Remove the Old Fabric
Start by first removing all the hardware that stops you getting to the fabric (if you have any). In my case it was a plastic cover and a passenger handle. I also removed the old duct tape that had been used to repair the old seat cover. You can see that my seat was in pretty rough shape!
Step 3: Cut the New Fabric and Start Sewing
If you used seam ripper to separate the old old pieces out you do not need to add an extra 10 mm to the the edge. If you used scissors to cut the parts, you do. This will be the overhang.
Step 4: Attaching the Fabric
After the seat cover is ready it is time to put it back on. It is a good idea to use some sort of adhesieve to attach the fabric to the foam. This will ensure that the fabric will not start stretching and moving around under your butt creating wrincles (on fabric not your butt).
Step 5: The Passenger Handle
Now I know that most bikes these days do not have this handle anymore as it is not the safest thing to hold on to for a passenger. I wanted to still have it as it is the main thing that I crab onto when pulling my bike on the middle stand.
Step 6: The End!
And you are done! I will not probably be perfect and flawless but what the hell?! You made a new motorcycle seat cover all by yourself! That is not something that many motorcyclist can say, eh? Be proud of your work and praise the inperfections!
Step 7: My Tour
I was half way done touring through Europe when I changed the fabric. I had friends in Austria who have some pretty neat sewing equipment and great tips that helped me a lot with this project. The aim of my tour was to visit them.
Buy the best quality cover you can
Many car- and bike-related components have dropped in production quality recently, but replacement seat covers for motorcycles have suffered particularly badly. The race to produce the cheapest cover has made it difficult to find one worth your coin.
Splurge for an electric or pneumatic stapler
Along the same lines of argument, spend a few bucks and get yourself an electric or pneumatic stapler. In this case, I took a trip to Harbor Freight and bought the wide-crown pneumatic stapler. It’s just over $30 and will perfectly serve my needs.
Head to toe, then side to side
For off-road-type seats like this one, it’s easiest to start with the leading edge (which would sit against the gas tank). Get the material nice and centered and tack it in place with one or two staples. Then move to the rear of the seat, leaving the sides loose.
