Repairing Guides

how to repair mountain bike shocks

by Victoria Hettinger Published 2 years ago Updated 1 year ago
image

How do you fix squeaky shocks on a mountain bike?

  • Lubricating your shock absorbers. One option is to lubricate your suspension. However, it’s important to note that too...
  • Use Loctite. Another option you can try is Loctite. It’s a liquid thread locker that you can use to solve this problem...
  • Do it yourself (Do-it-yourself) suspension service. You can also fix squeaky...

Part of a video titled How to fix & repair your MTB Suspension / Forks...full overhaul!
1:53
8:50
You can go ahead and undo. Those don't be alarmed if a whole lot of water comes out the bottomMoreYou can go ahead and undo. Those don't be alarmed if a whole lot of water comes out the bottom that's probably why most of the reason why your forks aren't. Working. Yes these are not looking.

Full Answer

How to install a rear shock on a mountain bike?

Your expert contributors this week are as follows:

  • Ken Perras, Rocky Mountain Product Manager
  • Adam Miller, Owner and Frame Designer at Revel Bikes
  • Jochen Forstmann, Founder and Co-Owner of LAST, General Manager and Head of R&D
  • Matt Hornland, PR & Marketing Content at FOX
  • Sofia Porfirio, Head of Marketing at Formula

What is the best rear shock for a mountain bike?

Mountain biking is ... the smoother your bike rides over obstacles. Traditional thinking says that having more suspension makes climbing more difficult, but the Trek Slash is one of the few outliers. With its rear suspension locked out, which is as simple ...

How to fix squeaky shocks on mountain bike?

  • First thing’s first, check to make sure your headset is tight. ...
  • Loosen stem bolts, equally and evenly until loose.
  • Remove headset bolt, headset top cap, and stack spacers in the order in which you take them off your bike.
  • Pull stem up and off of the steer tube of the fork.
  • Stack any remaining spacers separately from the spacers on top of your stem.

More items...

How to brake your mountain bike?

How To Adjust Mountain Bike Brakes?

  • Different Mountain Bike Brake Types. No matter what kind, all bike brakes are designed to make sure that your bike stops by halting the spinning wheel.
  • Adjusting The Brake Pads. Before adjusting, you need to see whether the brake pads are worn out or not. ...
  • Adjusting The Brake Cable. ...
  • Centering The Braking System. ...
  • Conclusion. ...

image

How do I fix my mountain bike shocks?

0:416:52Fixing Your Mountain Bike Suspension 101 - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd both your fork. And your shock. Cycle. Through a couple of times and you'll see all of the dirtMoreAnd both your fork. And your shock. Cycle. Through a couple of times and you'll see all of the dirt that pulls out of your seals. As well as lubricate those seals to keep them working perfectly.

Can you repair bike shock?

Maybe. As a rule of thumb, if your original equipment (OE – the one that came with the bike) shock absorber has a reservoir poking out of the body or at the end of a hose, it almost certainly can.

How do you service the front shocks on a mountain bike?

2:044:58A basic mountain bike fork service - YouTubeYouTubeStart of suggested clipEnd of suggested clipGive this rod a knockdown to release it from the outer leg and that needs to be done on both sidesMoreGive this rod a knockdown to release it from the outer leg and that needs to be done on both sides of the leg otherwise the fork legs won't come off both sides are stuck inside to the outer legs.

How do you rebuild a rear shock on a mountain bike?

0:0010:46How to Rebuild Fox Shox MTB Shock. Trail Breaker - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs you cycle the shock through its travel that allows the air to balance between the negative airMoreAs you cycle the shock through its travel that allows the air to balance between the negative air chamber here and the positive air chamber. So you don't get what they call a stuck down condition.

Can you refurbish shock absorbers?

Generally, you would have two options to fix the problem of worn shocks: repair the broken part(s) or do a shock absorber reconditioning. Contrary to what many people think, shock absorbers can be fixed. It is usually cheaper than having to buy new ones, especially when you have to replace four of them at a go.

How do you refurbish bike shocks?

0:128:50How to fix & repair your MTB Suspension / Forks...full overhaul!YouTubeStart of suggested clipEnd of suggested clipThis time what i'm going to be doing is actually opening up those end caps pulling out the dampersMoreThis time what i'm going to be doing is actually opening up those end caps pulling out the dampers pulling out the springs cleaning them putting them back together with some grease.

How do I know if my mountain bike shocks are bad?

0:2614:57How Do I Tell If My Shock Is Blown? | Ask GMBN Anything ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipPositive into a negative chamber. Though is recording a really high pressure actually there won't beMorePositive into a negative chamber. Though is recording a really high pressure actually there won't be much pressure in the positive. Right so therefore feels very soft. And quite linear.

Can I use WD40 on my bike suspension?

Please don't use WD40, GT85 or any similar products! Instead of cleaning your seals, they will wash away the grease under the seals, letting dirt in much more easily– even if you're careful you will also risk contamination of brake rotors/pads and these products can also dry out seals.

How much does a shock service cost?

RockShox Rear Shock Service RatesServicePriceDeluxe service$130Monarch Plus service$150Monarch service$130Vivid (coil only) service$1404 more rows

How long do mountain bike shocks last?

Coil shocks: one service annually. Lowers every 30-50hrs depending on conditions, full service every 75-100hrs D.O.C.

How do you fill the rear suspension on a mountain bike?

0:282:07Adjusting Rear Shock Air Pressure on a Bicycle - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we need to use a high pressure air pump to adjust to add in more air. So you unscrew the capMoreSo we need to use a high pressure air pump to adjust to add in more air. So you unscrew the cap screw on the high pressure air pump. And you're going to get a reading on there. If you need to release.

How much does it cost to rebuild a Fox shock?

SHOCK SERVICEREBUILDREVALVEOEM Raptor Front w/Coil$125$352.5 Bypass 2.5 Internal Bypass 3.0 Bypass XP 1000 Front$150$353.0 Internal Bypass 3.5 Bypass XP 1000 Rear$250$354.0 Bypass$300$354 more rows

What is the suspension on a mountain bike?

Most mountain bicycles sold today have a suspension, which generally consists of a suspension fork with anywhere from 3 to 10 inches of travel, and more expensive bicycles have a rear suspension. The primary purpose of a suspension is to absorb the shock created by various types of terrain and keep you in control ...

How to stop oil spray on fork?

Slowly pull the blades out of the lowers to prevent oil spray. Clean the insides of the fork carefully, being sure to drain all oil into a measuring cup and replacing it with fresh oil as per your fork manual. Grease any screw heads and tighten all of the screws into their original positions with your fingers.

How much should a fork be compressed?

If you have 5 inches of travel, the fork should be compressed by 1 inch while you’re sitting on the bike. Overhaul your fork. This should be done when the fork starts to feel sluggish or creaky or when it blows through its travel too quickly.

What does air do to air forks?

More commonly, forks will use springs or air for compression with oil or air used for compression damping. This damping mechanism is generally adjustable, and adding more oil, or thicker oil, will increase the damping effect. Similarly, adding more air to an air fork will result in a firmer suspension. Familiarize yourself with the external ...

What is the purpose of a suspension?

The primary purpose of a suspension is to absorb the shock created by various types of terrain and keep you in control of your mountain bike. Figure out what type of suspension you have. Inexpensive suspensions sometimes only consist of springs built into the blades of the fork without any compression damping.

What to do if your fork feels wrong?

Often, if something about your fork feels “wrong,” there’s nothing actually broken or in need of repair; the external adjustments on your fork can change the geometry and feel of the ride.

How much sag should a fork have?

In addition, the fork should have a certain amount of sag, equal to around 20 percent of the fork’s travel.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9