- Making Repairs. Use a pry bar to pull damaged boards. Remove fasteners and lift the board straight up to avoid damaging adjacent boards.
- Cleaning the Surface. Trim the replacement boards with a circular saw. Using adjacent boards as a cutting guide is faster and more accurate than measuring.
- Applying the Stain. Mesh filters (about $1 each) catch any particles that could wind up clogging the nozzle on the washer.
- Redoing a Railing. Because the original railing on their deck was in such bad shape, the Johnsons decided to replace it with a maintenance-free railing system.
How do you remove old deck boards?
- Burning It’s amazing how quickly we can be to burn unwanted items, especially if it’s wood. ...
- Composting I know composting as opposed to filling up your local landfill with scrap wood might seem like the responsible thing to do. Don’t. ...
- Cutting up
How to remove old deck boards. the easy way.?
Required Tools for this Project
- Cat's paw
- Circular saw
- Drill/driver - cordless
- Extension cord
- Hammer
- Hearing protection
- Jigsaw
- Locking pliers
- Miter saw
- Nail set
How do you fix deck boards?
- Use an orbital sander to remove any old gloss and smooth out any rough areas on decking boards.
- You may need to use a sanding sponge on the railings or balustrades.
- Use 60- or 80- grit sandpaper on the main deck boards, and use 80- or 100-grit on the handrails.
How to replace a damaged section of deck board?
Instructions
- Plan the Cut. The goal is to cut out the damaged section cleanly and make the repair look as natural as possible. ...
- Remove the Damaged Board. Put on eye protection before cutting. ...
- Seal Any Joist Rot. ...
- Add the Joist Reinforcement. ...
- Install the Support Cleats. ...
- Cut a New Decking Board. ...
- Finish the Board. ...
How do you repair damaged deck boards?
0:185:38How to Fix and Repair Damaged Deck Boards | Mitre 10 Easy As DIYYouTubeStart of suggested clipEnd of suggested clipBoard what i'm going to do is cut five millimeters away from those nails. So i'm going to leave theMoreBoard what i'm going to do is cut five millimeters away from those nails. So i'm going to leave the existing nails in the deck. So what i've done is cut myself a piece of timber.
How do you repair weathered deck boards?
0:392:16How to Restore Severely Weathered Wood with RESTORE - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can apply restore with a pump sprayer roller or a brush. I'm using a pump sprayer here to coverMoreYou can apply restore with a pump sprayer roller or a brush. I'm using a pump sprayer here to cover more area quickly and it'll make my job a lot easier especially along the deck rail.
How do you make old deck boards look new?
1:165:04How to Restore a Deck | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a pole sander. And 50 grit paper to sand the deck boards in the direction of the wood. Grain.MoreUse a pole sander. And 50 grit paper to sand the deck boards in the direction of the wood. Grain. Make sure to sand railings and balusters.
How do you restore GREY weathered wood?
Sand small areas of wood with sandpaper and a sanding block or large sections of wood with an electric sander. Use coarse sandpaper and continue to sand until all the grey is buffed from the surface of the wood.
How do you bring a wood deck back to life?
SCRAPE OFF LOOSE FINISH. Remove loose paint or opaque deck stain with a paint scraper. ... SCRUB THE SURFACE. Use a stiff bristle brush to remove flaking stain or dirt. ... APPLY CLEANER. Apply a deck brightener/refinisher product to wood surfaces. ... POWER WASH DECK. ... APPLY FINISH. ... USE A BRUSH.
How do you prepare a weathered deck for staining?
Before you apply stain, make sure the surface is clean (no dust, dirt, wood fibers or grease), dry and free from mildew. When a surface is not clean, stains and other finishes have trouble sticking and may end up peeling. Confirm no rain for 24-48 hours. Thoroughly sweep the deck to remove all leaves and other debris.
How do you fill cracks in weathered wood?
4:446:56See how Easily you can repair WOOD Cracks & Knots - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd i'm using titebond quick and thick it dries clear and that's key no yellow glue. And we're goingMoreAnd i'm using titebond quick and thick it dries clear and that's key no yellow glue. And we're going to apply a little sawdust. First step grab a little bit of the sawdust.
Can wood filler be used on a deck outside?
You can use it inside and outside without worrying about it flaking away, and it works very well when used to repair small gouges, cracks, knot holes, nail holes, and defects in unfinished outdoor and indoor wooden surfaces.
Introduction
When exposed to the elements wooden decks can warp and rot to the point that the boards become hazards. In order to remove these hazards, the rotted boards must be replaced.
Step 2
Once the new boards have been obtained, apply paint primer on all sides of the new boards.
Step 5
Use the Dremel tool in order to clear the old paint from the drive of the screw on the boards previously marked.
Step 6
Once the old boards are removed, mark roughly where the middle of the support board is.
Step 8
Once the holes for the nails are marked drill a hole deep enough for the nails to go into.
Step 9
To reassemble your device, follow these instructions in reverse order.
1. Prep & plan
Before you get started, make sure the weather is about 40 degrees Fahrenheit or higher. When I did this project, it was about 60 degrees Fahrenheit and sunny, which was perfect for this project.
2. Mix & start filling
Once you have a plan, start mixing the Bondo a little bit and add the hardening agent with a spreader. If you don’t have a spreader, a 1.5-2” putty knife can also work well depending on the size of your knot holes.
3. Repeat & refine
At this point, I wasn’t completely satisfied with the overall finish. While it doesn’t need to be perfect, I did a second coat and repeated the process to fill in spots that I missed the first time.
The wrap up
Overall, I’m happy with this project and think the wood filler gives the deck a more polished and finished look. Plus, it’s less likely you will get a large sliver in your bare foot, Ouch!
Identify the Worn-out Boards
Take a stroll across your deck and look closely to identify the old boards. Make note of any curled edges, splits and splintering in the wood, and especially full fractures that create a trip hazard or a sharp protruding edge.
Calculate the Dimensions
To find the right replacement boards, you must be aware of the dimensions and materials of the old boards. Measure the size of the board by calculating width and height. This step will allow you to find the exact replaceable size.
Materials and Tools
To replace the boards, you must acquire the appropriate tools to begin the repairing process. The necessary equipment includes a circular saw, drill, driver, nail puller, electric sander, and screws. You will likely also want a fresh coat of sealant and/or paint for the newly repaired areas.
Repairing Minor Damage
Minor issues can easily be remedied with a bit of sanding. However, as counterintuitive as it may sound, you might want to power wash your deck before sanding.
Replacing the Boards
Once you have all the essential materials, you can remove the older boards. Pull out the old boards by loosening the screws or prying the nails out using a nail puller. Do not use force or rip out the boards because it can harm connected boards that are otherwise undamaged.
Conclusion
Replacing old worn-out boards can be daunting if you don’t know what to look for or where to begin. If you’re not sure where to find quality material, reach out to Lee Roy Jordan Lumber for expert advice on choosing the right decking for your particular project.
What is deck restoration coating?
What is a Deck Restoration Coating? Deck restore paint coatings are made from a long-lasting tintable acrylic base material with UV inhibitors and added solids (aluminum oxide or sand). The solids provide texture and hold the product together (like aggregate in concrete).
How do I paint a deck with a stir stick?
Clean the gaps as you go with a stir stick or a 5-in-1 style deck paints tool. Dunk a brush into the pail and dribble it into missed spots or depressions to build them up. Start at one end of the board and walk the brush down the entire length in one continuous motion. If you lift the brush, you’ll leave marks.
How long does a deck paint restoration last?
Deck paint restoration coatings are thick enough to fill all cracks, knotholes, and splinters, and they provide a completely new textured surface that can last as long as 13 years without additional applications.
How long does it take for a primer coat to dry?
Clean up with soap and water and let the first coat dry for three to six hours (or until dry to the touch). You probably won’t like the look of the first coat. Don’t worry; it’s just the primer coat. The second coat is the “magic coat” that fills in all the gaps and provides the smooth texture you saw at the store.
Can you stain a wood deck?
Keeping a wood deck in good shape takes a lot of work. Even if you stain or seal it, the boards can still crack and splinter, making the deck look old and worn. Switching over to composite decking is one option, though the cost may be prohibitive. But there’s another, far more affordable solution.
Can you walk on a deck with bare feet?
If you pick a dark color and your deck gets direct sunlight, it may be too hot to walk on with bare feet. Some deck restoration products (such as Restore 10X) can be used only on horizontal surfaces, so you’ll need a matching or complementary product designed for the deck’s vertical surfaces.
What is composite decking?
Composite decking brands such as Trex or Fiberon composite deck boards, are crafted from recycled plastic particles and organic wood fibers then capped with a strong capstock. This protects composite deck boards from water damage, rot, and pests for an enduring deck space!
Why are my deck boards warping?
If you have started to notice that a few of your deck boards are feeling a bit soft or starting to warp due to water damage or rot ; you'll want to learn how to remove and replace old deck boards. Old deck boards with areas of curling or cracking are showing signs that the deck plank is no longer structurally sound.
Can you replace deck boards with composite?
However, when deck boards are giving too much bounce when stepped on or are showing visible cracks or deck rot; replacing worn-down deck boards is necessary. For many homeowners, replacing old decking can be a great opportunity to switch out old deck boards with long-lasting and durable composite decking. Composite decking brands such as Trex ...
How much stain does a 700 sq ft deck need?
This 700-sq.-ft. deck required about 5 gal. of stain — almost twice as much as the estimates indicated on the can. Explains Starling, “Old wood can get thirsty.
What kind of railing did the Johnsons use?
They chose Fiberon, a vinyl-coated wood-plastic composite. It's available in premade panels or as kits. The Johnsons liked the contrast the white railing offered.
What kind of nails did Graf use on the Johnsons deck?
For the Johnsons’ deck, Graf used galvanized ring-shanked nails when he replaced a few damaged boards. “Screws don’t pop like nails, “ he says “but we want the new boards to match the rest of the deck.”. Tip: If you need to rip replacement decking to match existing boards, use a tablesaw.
How long does it take to rejuvenate a deck?
A deck rejuvenation project like this can be done in two days, but it’s best to spread the work over two weekends to ensure the wood is completely dry before you apply stain.
What is the best way to clean wood?
When mixed with water, this chemical forms hydrogen peroxide (an oxygen-based bleach) and sodium carbonate, which acts as a detergent. It is good for removing dirt, mildew and weathered wood.
How to get rid of sun damage on wood?
For tackling tough stains, use a pressure washer (about $70 a day), which is the best way to remove sun-damaged wood fibers and tackle scrub-resistant stains. Graf recommends using a fan-type nozzle instead of a pinpoint nozzle that can dig into the wood.
What does it mean when a screwdriver sinks into a post?
“If you can sink the tip of a screwdriver into a post or joist, it means the you’ve got rot and it’s time for a major renovation ,” Graf says. Also, inspect the deck-to-house connection. “Screws and bolts can loosen and rust,” he says.
How do I protect wood from sun damage?
Protect the Wood With Stain, Paint or a Restoration Coating. After sanding, you’ll probably be impressed with the appearance of the wood, and you may decide that a stain is all it needs. If so, choose a semi-transparent deck stain with enough pigmentation to forestall further deterioration of the wood by the sun.
How long does it take for a deck to cure?
Wait for 24 hours before applying the second coat, and let that cure for the recommended time, usually 48 hours, before using the deck.
What is the best way to clean a splintered wood deck?
Power Washing Is the Best Treatment for an Old Wood Deck. If your deck is already splintered, you may think it counterintuitive to power wash it and run the risk of making the splintering worse.
Can you replace wood deck boards with composite?
Of course, there’s always the option of throwing away the old boards and replacing them, but new wood boards are expensive. Even replacing deck boards with composite can cost an arm and a leg.
