Repairing Guides

how to repair outside faucet frost free

by Miss Lyla Heller Jr. Published 2 years ago Updated 2 years ago
image

Turn the faucet off briefly, and then turn it on again. Water moving through the spigot should thaw any frozen sections of pipe behind the faucet. You can also fix a frozen outdoor faucet by thawing it with a hair dryer or wrapping it with heat tape. Both methods require an electrical plug-in, so be careful. How do you defrost a frost-free faucet?

Full Answer

How do you repair a frost free faucet?

Start with the retaining nut, then look for other problems

  • Tighten retaining nut. If you're lucky, you can fix your leaking faucet by simply tightening the nut under the handle. ...
  • Remove the stem. Next, remove the faucet stem. ...
  • Replace washer assembly. Keep track of the parts as you disassemble the faucet so you can install the new ones in the same order.
  • Remove the vacuum breaker cap. ...
  • Vacuum breaker parts. ...

How to repair a dripping outdoor faucet?

To replace an outdoor faucet washer:

  • Turn the water off to the faucet.
  • Unscrew the packing nut by turning it counterclockwise.
  • Pull the handle and stem out of the faucet housing.
  • Remove the screw on the end of the stem that holds the rubber washer.
  • Replace the rubber washer on the stem with one of the same size.
  • Tighten the screw holding the washer back up.

More items...

How to repair fix outdoor water faucet easy simple?

What You’ll Need

  • Outdoor faucet repair kit (for your faucet brand)
  • Pliers or adjustable wrench
  • 2 flathead screwdrivers
  • Phillips screwdriver
  • Replacement vacuum breaker parts
  • Washer assembly

How do you repair an outdoor water faucet?

Things You'll Need

  • Spray lubricant
  • Two pipe wrenches
  • Stiff bristled brush
  • Teflon tape
  • New faucet

image

How do you fix a frost free outdoor faucet?

1:493:02Fixing Faucets : How to Repair a Leak in a Frost-Proof Water FaucetYouTubeStart of suggested clipEnd of suggested clipYou'll need to remove the bib washer first remove the screw. And then take your pick or knife andMoreYou'll need to remove the bib washer first remove the screw. And then take your pick or knife and remove the bib washer. Once you have your new washer you've matched up the proper.

Can you fix frost free taps?

You may be able to fix the leak by simply cleaning the parts and reinstalling them. If this doesn't work, take the parts to the store to find replacement parts. Leaky, dripping exterior faucets not only waste water but also dump it next to the foundation, right where you don't want it. Luckily, they're easy to fix.

How do you fix an anti siphon outside faucet?

3:357:36How To Fix a Water Leak in the Anti Siphon Valve of an Outdoor FaucetYouTubeStart of suggested clipEnd of suggested clipYou can get you can get them online as well from Menards. So all we're gonna do is place that littleMoreYou can get you can get them online as well from Menards. So all we're gonna do is place that little plunger within the casing.

How do you replace a frost free Sillcock outdoor faucet?

1:054:46How to Replace an Outdoor Faucet with a Frost-Proof Sillcock - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it around the pipe snap it together and then just spin it around in the direction the arrow.MorePut it around the pipe snap it together and then just spin it around in the direction the arrow. Pretty cool cutter surfeit go got it a little bit of water.

How do you remove the stem from a frost free faucet?

0:172:54How to Fix a Leaky Outdoor Faucet that has a Frost-Free Valve StemYouTubeStart of suggested clipEnd of suggested clipNow remove the handle by unscrewing the screw that holds it in place behind the handle you'll find aMoreNow remove the handle by unscrewing the screw that holds it in place behind the handle you'll find a packing nut turning counterclockwise use a wrench to undo the packing nut.

Why does my frost free faucet leak?

A leaking frost-proof faucet can waste a lot of water, but fixes are simple, whether the problem is the faucet stem washer assembly, the vacuum breaker, or just a loose retaining nut. Start with the retaining nut, then look for other problems. Tighten retaining nut.

How much does it cost to replace an anti-siphon valve?

To replace your outdoor faucet, expect to pay $10 to $60 for the part itself and an additional $150 to $200 per hour for labor....Loose-Key Hose Bibb.Faucet TypeCostFrost-free faucet$35 – $200+Anti-siphon faucet$45 – $300+Yard hydrants$800Ball-valve faucet$302 more rows•Jan 20, 2022

How do you fix a frost free hydrant?

6:259:16Simmons Frost-Proof Yard Hydrant- Repair Kit and Plunger ReplacementYouTubeStart of suggested clipEnd of suggested clipPut the head down over the rod putting the rod through the packing nut and up through the connector.MorePut the head down over the rod putting the rod through the packing nut and up through the connector. Do not tighten the packing nut or the set screw and turn on the hydrant.

Why did my outside faucet stop working?

If you are still having issues with your outdoor faucet, you may need to call a plumber to investigate the issue further. If the faucet has no water, the issue could be the aerator or the spout inside the faucet. At the bottom of the faucet spout, rubble may get into the filter.

How do you fix a leaky silcock?

0:213:15How to Fix a Leaky Frost Free Sillcock / Outdoor Faucet video - YouTubeYouTubeStart of suggested clipEnd of suggested clipOff I'm going to take off the center screw. Then remove the handle. And then underneath this nut isMoreOff I'm going to take off the center screw. Then remove the handle. And then underneath this nut is a washer and a lot of times the problems in this washer.

How do you take apart an outdoor spigot?

2:278:11How to Rebuild a Hose Spigot | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to see just what's going on inside. So let's see if we can get this apart with someMoreAnd we're going to see just what's going on inside. So let's see if we can get this apart with some water pump pliers. For good measure i'm going to hold back with a wrench.

How do you replace a Sillcock valve?

5:266:51How To Replace Sillcock Valve With Frost Free Shark Bite - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll right so we have a silk collective the house we're gonna get a measurement from the end of theMoreAll right so we have a silk collective the house we're gonna get a measurement from the end of the silic lock over to our new valve. So you can mark it with a pencil or you can take a tape measure.

How do you fix a frost free hydrant?

0:0013:17How to repair an outdoor hydrant - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe little rubber stop on the bottom aside. You know I'm going to pull it apart so this can kind ofMoreThe little rubber stop on the bottom aside. You know I'm going to pull it apart so this can kind of walk you through it on on on fixing.

How do you fix an outside faucet that won't turn on?

1:108:29WATER WON'T COME OUT!...EASY Fix for a Outdoor Water Faucet!YouTubeStart of suggested clipEnd of suggested clipYou just slap this right. On. Here turn clockwise until it shuts.MoreYou just slap this right. On. Here turn clockwise until it shuts.

How do I fix my nibco outdoor faucet?

0:004:25Leaky Hose Spigot Repair (NIBCO) - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday i'm going to show you how to fix a leaking. Little nibsco nibco water spigot as you can seeMoreToday i'm going to show you how to fix a leaking. Little nibsco nibco water spigot as you can see there's a little pile of water. And noticed some leaks. Coming down here at the end of the spigot.

How do you replace a frozen outdoor faucet?

1:236:19How to Replace a Frozen Outdoor Faucet with a Freeze-Proof OneYouTubeStart of suggested clipEnd of suggested clipUsing a twist drill bit drill out the 5/8 inch hole to a one-inch hole. Slide in the new freezeMoreUsing a twist drill bit drill out the 5/8 inch hole to a one-inch hole. Slide in the new freeze proof faucet and temporarily secure it in place with the screw.

Where is the vacuum breaker on a frost proof faucet?

Most frost-proof faucets have a built-in vacuum breaker located on top of the faucet (Photo 4). If you see water dribbling out from under the cap when the water is running, it's leaking. Photos 4 and 5 show how to replace a leaking vacuum breaker. Some repair kits include the parts for this.

How do I fix a leaking faucet?

If you're lucky, you can fix your leaking faucet by simply tightening the nut under the handle. Don't crank it hard, though. If snugging it up doesn't solve the problem, turn off the water and remove the nut to repair the faucet.

How to fix a faucet that leaks from the handle?

In some cases, you can fix this by simply tightening the retaining nut that's under the handle. Remove the screw in the center of the handle and pull the handle off. Try tightening the nut slightly (Photo 1).

What to do if your faucet starts leaking?

If you find that the faucet starts leaking again after a short time, the valve seat is worn and you should replace the entire frostproof faucet. If the faucet is attached with threads, you can simply turn off the water, unscrew the faucet and replace it with one that's the same length.

What happens if a faucet spout is leaking?

If your faucet still leaks, the stem may be leaking and you should replace the faucet. If your faucet leaks out of the spout when it's turned off, the washer is bad. On frost-proof faucets, the washer is located on the end of the long faucet stem.

Can a frost proof faucet leak?

A leaking frost- proof faucet can waste a lot of water, but fixes are simple, whether the problem is the faucet stem washer assembly, the vacuum breaker, or just a loose retaining nut.

How long does it take to repair a frost free faucet?

When a frost-free faucet develops a leak, the homeowner can complete the necessary repairs in one hour or less, using a few basic tools and materials--all of which are readily available at a local hardware store or home center. Advertisement.

What is a frost free faucet?

The difference is that a longer frost-free faucet stem connected to the compression washer valve seals off the water supply inside the home rather than near the spout where the water would be exposed to the cold outside temperatures.

How to remove a packing nut from a faucet?

Remove the faucet packing nut by turning it counterclockwise with an adjustable wrench. Use lockjaw pliers to support the frost-proof faucet body while removing the packing nut. The packing nut is located directly behind the handle and has six flat sides to facilitate removal with a wrench.

How to Repair a Leaky Frost-Proof Faucet

Here are step-by-step instructions for how to repair a frost-proof faucet that’s leaking from a worn-out O-ring or washer.

Final Thoughts

Trust us, repairing a frost-free faucet looks much more complicated than it actually is.

Call 1-Tom-Plumber

Don’t hesitate to contact us here or call us at 1-Tom-Plumber (1-866-758-6237) if you need help repairing or installing a frost-proof outdoor faucet.

How does a frost free hydrant work?

How a Frost-Free Hydrant Works. A frost-free hydrant can be thought of as a very long compression faucet. The horizontal water pipe running out to the hydrant location from the house must be buried deep enough to be below the frost line, which in some climates can be 4 feet or more below ground. The actual valve body is located at ...

What makes a hydrant frost proof?

But what makes the hydrant frost-proof is a design variation that features a drain port built into the bottom of the valve. When the pump rod and plunger lift away from the valve seat, this drain port is blocked, forcing water to flow up the standpipe. However, when the pump rod and plunger are lowered down to close against the water inlet, ...

What to do if hydrant lever is not fully closed?

If the hydrant lever can't be fully closed, or if the faucet continues to dribble water when the lever is closed, you may need to adjust the hydrant's shutoff. Most hydrants have a square-head setscrew or a lock wheel that can loosened to allow for small adjustments to the position of the lever.

How to remove a pump rod?

Remove the Pump Rod. Carefully pull up and remove the long pump rod from inside the standpipe. If necessary, grip the rod with pliers to remove it; use pliers only on the outer portion of the rod, not on the brass spindle. Unscrew the old plunger from the end of the rod, using a screwdriver.

What is a frost free yard hydrant?

A frost-free yard hydrant is really just a variation on a standard compression faucet, in which a plunger at the end of a plunger stem opens and closes against a water inlet to control the flow of water. But in the case of a yard hydrant, the plunger is fitted onto the end of a long pump rod that runs down inside the vertical standpipe to ...

When a pump rod and plunger are lowered down to close against the water inlet, the drain port is

However, when the pump rod and plunger are lowered down to close against the water inlet, the drain port is opened and any water in the standpipe drains away into the ground—the surrounding area is usually packed with gravel to facilitate drainage.

Where do you turn off water lines in your house?

If there's no shutoff valve on the individual water line, you can turn off the water at your home's ​ main shutoff valve .

image

How to Repair A Leaky Frost-Proof Faucet

  • Here are step-by-step instructions for how to repair a frost-proof faucet that’s leaking from a worn-out O-ring or washer. 1. Turn off the water supply valve to the sillcock inside the house. It should be located somewhere close to the opposite side of the outdoor spigot (on the inside of the house). If you can’t find it, then shut off the main wat...
See more on 1tomplumber.com

Recommended Frost-Proof Faucets

Final Thoughts

  • Trust us, repairing a frost-free faucet looks much more complicated than it actually is. Remember, all you’re doing is (1) tightening what’s already part of the assembly to make sure the fittings are extra-secure, and (2) replacing simple O-ring and washer if they look worn out. It’s as simple as taking one out and putting the new one in. Give it a try if you’re seeing a leak. You got this!
See more on 1tomplumber.com

Related Resources

Call 1-Tom-Plumber

  • Don’t hesitate to contact us here or call us at 1-Tom-Plumber (1-866-758-6237) if you need help repairing or installing a frost-proof outdoor faucet. 1-Tom-Plumber’s certified team of plumbers and drain technicians respond immediately to any emergency plumbing,drain cleaning, or water damage problem. We also handle the excavationof underground water lines and sewer main line…
See more on 1tomplumber.com

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9