
- Make sure you have eliminated the source of water/leak or moisture.
- Use a Hairdryer to heat up the area and completely dry the area out,
- Place a very heavy item such as a stack of heavy books over the damaged Pergo flooring area, or a dumbbell/heavy water bottle over a stack of books,
- The swelling should go down to an extent in a couple of days as the floor continues to dry.
Full Answer
What is the best thing to clean Pergo floors with?
Vinegar and Water
- Mix up a spray bottle full of vinegar and water.
- Use 1/2 cup vinegar in a 32 ounce spray bottle and fill the rest of it with water.
- Next spray the Pergo flooring with some of the vinegar solution.
- Then wipe it up with the Swiffer that’s covered with the terrycloth mop cover.
- Make sure you get it fairly dry.
How to make Pergo Shine?
What is the best product to clean Pergo floors?
- Vacuum the floor and mop it down to remove all the dirt.
- Pour the cleaner/etcher into a paint tray and use a scrubber to work it into the finish.
- Rinse the floor with a solution of 1 ounce liquid soap per gallon of water.
- Apply the restorative finish with a paint pad.
How much is Pergo laminate flooring per square foot?
Pergo laminate flooring averages $3 per square foot for the supplies and $5 per square foot to install. Expect to spend $1,500 to $7,000 on this project. Expect to spend $1,500 to $7,000 on this project.
How to clean Pergo wood floors?
Method 1 Method 1 of 3: Cleaning Regularly Download Article
- Clean the floor regularly with a damp dust mop. Pergo floors will attract dust, so you’ll want to make sure you wipe it clean regularly with a dust mop ...
- Use a vacuum to suck up dirt, dust, and hair. Clean dirt or other obvious impurities with a vacuum cleaner.
- Use a cloth wipe for touch-ups. ...
- Avoid using improper cleaning materials. ...

Can Pergo floor be repaired?
Pergo laminate flooring is durable, but it won't hold up to everything. When you damage a single board, you have a few options for making the repair. You can usually take care of minor scratches and scuffs without much trouble, but a break or split using means replacing the board.
How do you replace one piece of Pergo flooring?
0:413:08Installing Pergo vinyl flooring - How to replace a damaged vinyl plank?YouTubeStart of suggested clipEnd of suggested clipUsing a plunge saw being sure to stay ten centimeters away from the edges. Make two parallel sawMoreUsing a plunge saw being sure to stay ten centimeters away from the edges. Make two parallel saw cuts. Once again staying ten centimeters away from the ends. Make two new incisions.
Can you replace just one piece of laminate flooring?
0:011:34Replacing a Damaged Flooring Plank | Tips and Tricks | Armstrong FlooringYouTubeStart of suggested clipEnd of suggested clipSaw set to the thickness of the plank. To cut along the lines. Use a sharp chisel to finish the cutsMoreSaw set to the thickness of the plank. To cut along the lines. Use a sharp chisel to finish the cuts into the corners of the plank carefully remove cut pieces. Starting with the center.
How do you repair a chip in a Pergo floor?
1:375:27LAMINATE FLOORING REPAIR BEGINNERS - HOW TO FILL JOINTSYouTubeStart of suggested clipEnd of suggested clipSo I actually mixed two colors of wax together to get the color that was gonna match the floor theMoreSo I actually mixed two colors of wax together to get the color that was gonna match the floor the best I tried it just using the first color straight and it was just a little bit light.
Can you repair damaged laminate flooring?
If one of your laminate floorboards has sustained damaged, there's no reason to panic. Regular scratches and even cracks can be repaired with a floor repair kit. Available in different colours depending on your laminate's colour, they're simple to use with impeccable results.
How do you fix Pergo water damage?
4:356:16Water Damaged Laminate Flooring-How To Fix It ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAgainst the laminate flooring you can also get an attachment that base flat against the floor. AndMoreAgainst the laminate flooring you can also get an attachment that base flat against the floor. And go through each of the cracks. And the areas where the laminate flooring connects.
How do you repair a floating floor?
0:071:29How to Repair a Floating Floor : Let's Talk Flooring - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut I found that works really well is just some laminate floor filler. What you do is you take. AndMoreBut I found that works really well is just some laminate floor filler. What you do is you take. And you put just a little bit on the area that you want to fix. I actually use my finger.
Is there a filler for laminate flooring?
Can it be done? Yes, you can hide and repair cracks in laminate flooring. You can use products like wood filler, wood putty, or wood glue, designed to fill and improve minor to more apparent imperfections in the floor without the need to replace the entire floor or the whole laminate plank.
How often should you replace your laminate flooring?
Laminate Flooring Lifespan: 10-15 years for low quality tile and installation; 20-30 years for high quality with proper installation.
Do laminate floors chip easily?
The short answer is that there isn't any laminate flooring on the market that's totally scratch proof. It's just a fact that any flooring material, from natural wood to engineered timber or hybrid flooring, can be damaged.
How do you fix chipped vinyl plank flooring?
0:511:54How To Replace Click-Lock Vinyl Flooring - YouTubeYouTubeStart of suggested clipEnd of suggested clipUsing a sharp utility knife cut off the corner where the two grooved edges meet apply a scan feed ofMoreUsing a sharp utility knife cut off the corner where the two grooved edges meet apply a scan feed of cyanoacrylate adhesive to the exposed group sides of all the flooring surrounding the repair.
How do you stop laminate floors from chipping?
How to Avoid Chipping Laminate Flooring When CuttingCover the finished side of a piece of laminate floor with low-tack masking tape. ... Make a pencil mark on the unfinished-wood side of the laminate plank at the required cut length. ... Don safety glasses. ... Move the plank to a stable worktable with the taped side facing down.More items...
How do I remove a section of laminate flooring?
Remove the Laminate Flooring Place the tip of the curved end of the pry bar in the space between the first row of planks and the wall. Use the pry bar to tilt the edge of the first plank up enough to grasp it with your fingers. Wiggle and pull the plank at an angle to disconnect it from the adjacent piece.
How do you repair a water damaged laminate flooring board?
Remove thresholds or shoe molding that overlap your damaged flooring. Remove damaged pieces of flooring, while protecting the good ones. Sweep off the underlayment. Apply glue to new pieces according to manufacturer's instructions.
How do you replace vinyl planks in the middle of the floor?
0:482:55How to replace a damaged vinyl plank | Tutorial by Quick-Step - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlan make an incision in the length of the plank using the store being shorter stay ten centimetersMorePlan make an incision in the length of the plank using the store being shorter stay ten centimeters away from the end. Make four new incisions.
How do you remove laminate flooring without damaging it?
0:1612:42How To Remove Laminate Flooring - YouTubeYouTubeStart of suggested clipEnd of suggested clipPiece that's transitioning from from our laminate floor down to another surface which in this caseMorePiece that's transitioning from from our laminate floor down to another surface which in this case is vinyl. And it's it's simply held down in a little piece of track. There.
I've heard hardwood flooring is difficult to install sometimes. What makes it hard?
It isn't always super difficult, but it can be. When you do hardwood flooring, you have to also think about the base around the flooring. So very o...
How much will it cost to have a contractor replace part of my floor?
It really depends on the material and the contractor. So, some laminate floor is really cheap; it can cost as little as 80 cents a square. The nice...
How do I repair bigger gouges?
If it's quite a big gouge, then sometimes replacing the board is required. You'll have to disassemble the floor from one end of the room towards wh...
Can you remove scratches from laminate flooring?
It can be difficult to keep a laminate surface clean and free of scratches, but there are a few things you can try. First, try baking soda, as it i...
How to fix scratches on Pergo flooring?
Fix scratches and minor blemishes with a repair kit, available from a Pergo dealer. Match the kit to the model number of your flooring to ensure a color match. Apply the patching compound to the defects with the applicator that comes in the kit.
What to wear when cutting laminate flooring?
Wear safety glasses when cutting laminate flooring to protect your eyes from wood chips and plastic shards.
How to make a triangular board?
Make four diagonal cuts from the corners of the rectangle to the corners of the board, stopping just short of the edge of the board. Finish each cut with a hammer and chisel. Pull out all the triangular sections and clean up the edges of the boards that remain.
Can Pergo laminate flooring be glued down?
When you damage a single board, you have a few options for making the repair. You can usually take care of minor scratches and scuffs without much trouble, but a break or split using means replacing the board. Pergo floors aren't glued down, so you can always ...
How much does it cost to repair laminate flooring?
According to HomeAdvisor, the average cost of laminate floor repair is $800. You do not have to hire a professional every time; you can repair yourself. I’ve included DIY methods below if you want to know how to repair laminate flooring.
What to do if laminate flooring is damaged by water?
If laminate flooring has been damaged by water, there is only one solution: replace it.
Why do laminate planks swell?
Laminate planks damaged by water or moisture, causing them to swell, need replacing. To prevent further damage to the new planks, address the source of water damage.
Why does laminate expand when there is no space?
This can happen due to changes in the atmosphere and moisture, making the laminate expand when there is no space to expand.
Why does laminate flooring peel off?
This can occur due to small accidents like dropping a sharp object on the group, stilettos, or furniture being moved around.
What is wood filler?
Wood filler is a great help whenever it comes to repairing materials like hardwood or laminate flooring. They can help coat or fill in gaps. They come in different colors and qualities; pick the one that can get as close to the color of your floor.
How to repair buckled laminate?
Unfortunately, the only way to repair a buckled laminate is to replace the planks with a new one.
What to buy to repair laminate floors?
Buy a laminate floor repair kit that closely matches the color of your floor. [5]
How much does laminate flooring cost?
It really depends on the material and the contractor. So, some laminate floor is really cheap; it can cost as little as 80 cents a square. The nicer stuff can run you $2.00-3.00 per square foot, but then there's the installation cost. That can run anywhere from $1.75-4.00 a square foot. Then, on top of that, it depends on the shape of the floor and how much space you're covering. Even then, there's still going to be the visit charge for the contractor, so the price can end up varying quite dramatically.
How to get scratches out of laminate?
First, try baking soda, as it is an abrasive enough substance to remove dark marks and buff out scratches naturally. You can also try using laminate paste or filler. To do this, find a paste color that matches your laminate, apply it to the scratches, use a putty knife to smooth out each layer , and allow a minimum of 24 hours to dry.
How to replace a board that has been damaged?
Replace the damaged board with a new one. Line up the tongue and groove of the new board the same way as those of the board you removed were lined up. Snap the new piece into position. [15]
How to find the closest color to a damaged board?
Tip: If you don't have a spare board to take shopping to color match, then take a picture on your phone of the damaged area and use it as a reference to find the closest color or colors.
Can you replace a gouged floor board?
If it's quite a big gouge, then sometimes replacing the board is required. You'll have to disassemble the floor from one end of the room towards wherever the damaged piece is, replace that piece, then put the floor back together the way it was.
Can you replace boards after you remove them?
Set aside the boards that are still good, in the order you removed them, so that you can replace them afterward.
Why do Pergo boards have gaps?
The Causes of Gapping. Pergo recommends a 3- to 5-day acclimation period prior to installation so the boards can come into equilibrium with the humidity conditions in the installation space. Failing this, the boards can lose moisture and shrink after installation, and gaps will develop.
How to fix a gap in a subfloor?
The alternative is to disassemble the floor and reinstall the boards more tightly together. Localized gaps caused by subfloor irregularities call for disassembly of the floor to expose the subfloor. Once you have access to it, you can properly level it with leveling compound or a belt sander.
Is Pergo laminate more stable than wood?
By Chris Deziel. Pergo laminate flooring boards have a fiberboard core, and although it's more stable than wood, Pergo floors can develop some of the defects of hardwood floors, including buckling and crowning.
What to know about laminate flooring?
First of all, the floor that it goes down on top of has to be pretty flat. It’s got a very low tolerance to floors that are even the least bit out of level, that have any kind of bumps or rolls in it.
Should I get my contractor back after putting down the floor?
I would get your contractor back and have them address this, because that definitely should not have happened once that floor was put down.
How to tell if laminate is water damaged?
Look for warped areas that are bending or cracking. When laminate gets saturated by water, it absorbs the moisture which in turn breaks down the structure of the flooring. There are a number of signs that point to your floor being water damaged, including bending or cracking.
Why wipe laminate flooring?
Whenever there is a small spill of any kind on your laminate flooring, wipe it up immediately to prevent water damage from occurring over time.
Why is laminate flooring so popular?
Laminate flooring is popular among homeowners because it looks nice and is durable. These floors can last for years and don’t require much maintenance along the way. That said, the wood in the laminate floors is prone to water damage if it’s not treated properly.
What to do with sticky notes on floor?
Snap a picture of the entire floor with the sticky notes in case you need to show it to a flooring dealer.
What to do if you can't find planks?
If you can’t find any planks that look like the ones you have at home, you might be better off replacing the whole floor. Ask the flooring dealer for their advice if this is the case.
How to keep planks in place?
Place a heavy object on top of the planks to help them set. Be it a bookcase or couch, this object will keep the planks in one place and allow the adhesive to keep them connected for a long time.
Why do tiles pop out of the floor?
Tiles can also be pushed apart by water damage. Go over every tile individually when you check. As you walk around, push on your floorboards to see if they are popping up out of the base of the floor. Be critical when you do this, as even a small distortion to the tiles can be the result of water damage.
