Repairing Guides

how to repair pergo water damage

by Ms. Penelope Boehm I Published 2 years ago Updated 2 years ago
image

  1. Remove the baseboards and take up all the old water-damaged pergo flooring,
  2. Remove and dispose of the old underlay, Do not try to re-use it with the new flooring as it will be moisture affected,
  3. Make sure that the source of water damage is taken care of,
  4. Make sure that the subfloor is completely dry, if not consider hiring a water damage restoration company to completely dry it out with industrial-grade dehumidifiers,
  5. Make sure that the source of water damage isn’t water coming up from below,
  6. Install new moisture resistant underlay
  7. Install new flooring of your choice

Part of a video titled Water Damaged Laminate Flooring-How To Fix It ... - YouTube
4:56
6:16
And go through each of the cracks. And the areas where the laminate flooring connects. And justMoreAnd go through each of the cracks. And the areas where the laminate flooring connects. And just really try and suck out as much water as possible.

Full Answer

Can water damaged Pergo laminate flooring be repaired?

For Properly Installed Pergo floorings depending on the amount of water, you only have few hours to clean up the water and dry the Pergo before it causes damage that’s not repairable. In this article we will cover Water Damaged Pergo Laminate flooring

How do I know if my Pergo flooring is leaking?

The most common sign apart from obvious water damage or leak is discoloration of your pergo flooring and a smell of mold/visible mold in your house. When compared to real hardwood floors, you can’t dry under Laminate flooring without having to completely take it up.

Do you have water under Pergo flooring?

Water Under Pergo Flooring – What to do? If you suspect you have water under your Pergo flooring you need to act fast, as not only it can damage your Pergo flooring it can wreak havoc on all your house.

How do you fix a split or broken Pergo floor board?

You can usually take care of minor scratches and scuffs without much trouble, but a break or split using means replacing the board. Pergo floors aren't glued down, so you can always disassemble one to remove a damaged board. This may not be practical, however, if the room is full of furniture and the damaged board is in the middle of the floor.

image

Can water damaged laminate flooring be repaired?

Water damaged boards can't be fixed, but they can be replaced. If you have leftover laminate flooring boards from your original installation, use those. If not, match the damaged boards with new ones. Make sure the floor is completely dry before you begin the repairs.

What happens if water gets under Pergo flooring?

4 Steps To Fix Water Under Laminate FlooringStep 1: Mop Up Any Water That Is Still Present. First, you need to make sure you mop up any water that is still present. ... Step 2: Use a Vacuum and Remove Damaged Molding. ... Step 3: Fix The Damage. ... Step 4: Make Sure the Area Is Dry Before They Install the Boards.

Can you fix swollen laminate flooring?

Proper Repair of Swollen Laminate You can cut the new boards using the damaged pieces as a guide. Replace the damaged boards with boards from the outer edge of your original flooring and then replace the outer boards with new boards that have been allowed to acclimate in the room for at least 72 hours.

What does water damage look like on laminate floors?

No matter how durable your flooring is, flooding can cause significant water damage to your floor. When your laminate flooring gets saturated with water or any liquid, the planks will start to bend and buckle. It would make your laminate flooring look hideous and it would become more damaged over time if you ignore it.

How long does it take for mold to grow under laminate flooring?

Mold only takes 24 to 48 hours to grow. Given the right, moist environment, it would easily thrive. However, if groundwater flooding or a sewage backup occurs, it would only take 12 to 24 hours to grow.

Will mold grow under laminate flooring?

When water gets trapped under the boards, it creates a dark, moist environment that's ideal for the growth of mold. Eventually, this mold will creep upwards from the sub-floor to the top of the surfacing. At this point, without a doubt, you'll need a new flooring installation.

How do you fix a swollen laminate floor without replacing it?

The best way to fix constant bubbling on laminate flooring is to get rid of excess moisture under the planks. Create expansion joints and use a dehumidifier in the room to reduce moisture content causing the bubbles and swelling.

Will water under laminate dry out?

While water under laminate may eventually dry out on its own, it'll typically cause damage before that occurs. If you try to wait, the odds are relatively high that irreparable damage will occur to at least some of your floorboards. Additionally, the delay increases your odds of ending up with mold.

How do you flatten bubbled laminate?

Minor bubbles can be fixed by “bursting” them. Place a damp cloth on the bubble and cut a slit on the bubbled area using a sharp knife. Squeeze wood glue into the slit you have opened and press the veneer down. Place a weight overnight so that it is entirely flattened.

What to do if water gets under laminate floors?

When the water reaches under laminate flooring, the water must be removed immediately. If a small amount of water has leaked toward the edges of the flooring, pull up any quarter-round (shoe molding) or baseboards around the perimeter. If the water is not pervasive, you may be able to extract it with a wet-dry vacuum.

How do you repair Pergo flooring?

1:292:35Repair laminate flooring: how to replace a broken plank - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply some glue to the edge of the short and long side of the surrounding boards grab yourMoreApply some glue to the edge of the short and long side of the surrounding boards grab your replacement board and click it with the non sword part in the sides.

Is Pergo waterproof?

Unlike ordinary laminate, Pergo Outlast+ combines Uniclic® joint technology with revolutionary SpillProtect to prevent liquid from seeping into the joints making it 100% waterproof for life.

How do I get water out from under my floor?

Soak Up as Much of the Water as Possible Towels, mops and clean rags can immediately soak up small puddles and spills. Use a wet vacuum to pull up larger water sources from out the flooring. Don't stop using the wet vacuum even when you can no longer see the water on the surface of the wood.

How long does water under floor take to dry?

This all depends on the amount of water that is trapped under your flooring. It can take anywhere from 24 hours to a few weeks. Therefore, it's important to quickly treat any spills and run a dehumidifier and powerful fans to help speed up the drying process.

How do you dry a subfloor after water leak?

The first step is to absorb any water lurking on the surface of the floor. Then, place a dehumidifier at high settings to pull out any moisture that is still in the air. If the water leak is localized in one area, make sure to isolate that area by either closing the door or blocking off the doorway with a plastic tarp.

How do you dry water under vinyl flooring?

How to Remove Moisture From Underneath Vinyl FlooringGo into the crawlspace under the floor and look for signs of moisture on the joists. ... Ventilate the crawlspace with one or two fans for several days -- or even one or two weeks -- to dry out the subfloor.Address obvious sources of moisture.More items...

What is a pergo floor?

Pergo is a floating floor and there is a vapor barrier underneath. This vapor barrier acts as a moisture trap. If the flood was professionally remediated, the remediation company would have used a specialized drying system that injects hot dry air in large volumes underneath the floor.

When did Pergo laminate flooring come out?

The glue oozed out of the joints and had to be cleaned off. It was a time consuming process. Pergo was the first one to come to the USA in 1994.

How long did I lose my electric during Hurricane Irene?

Hi! As a result of Hurricane (aka tropical storm) Irene, I lost electric for 5 days. I recently renovated my basement and had pergo flooring installed in the kitchen area. Unfortunately, I forgot there was a 16 lb. bag of ice in the freezer part of the fridge and it leaked onto the pergo floor. By the time I realized it, the water had already dried up and I can see that the floor has some water stains in places where the water had been sitting. I came onto this site to ask how I could clean the floor but, after reading these blogs, I am now also concerned about the possibility of mold underneath the floor and possible damage to the moisture barrier.

How long does it take to dry a water damaged floor?

You may not need to necesarily replace a portion of your water damaged floor, but have them dry it instead. The process may take several weeks, but thorough drying under the floor is very important.

Can you remove a board from Pergo?

Pergo is a floating floor it should not be adheared to the substrate. It is possible to remove a board or an area of Pergo that is damaged but is not for the do it yourselfer. So depending on the amount of damage it may be possible to replace the flooded areas.

How to tell if laminate is water damaged?

Look for warped areas that are bending or cracking. When laminate gets saturated by water, it absorbs the moisture which in turn breaks down the structure of the flooring. There are a number of signs that point to your floor being water damaged, including bending or cracking.

How do I repair laminate flooring?

1. Find the source of flooding or leaking and plug it up. You shouldn’t start the process of repairing laminate floors until you know where the water is coming from and how to stop it. Turn off your water supply to prevent leaking from continuing.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9