
How to repair a torn flexible plastic bumper cover
- Make sure both edges of the torn bumper cover are clean.
- Saturate both surfaces of the torn bumper cover with our Poly Prep, an adhesion promoter for polymers. (Don’t make the...
- Spray ONE edge with the Activator/Accelerator (AA). Please note, our AA acts more as an Activator, not an Accelerator.
How to repair and retexture a bumper cover?
- Aluminum Body Tape (several options available)
- 1000 Super Prep Plastic Cleaner (several options available) OR 1001-4 EcoPrep Plastic Cleaner
- Plastic Magic Adhesion Promoter (several options available)
- Nitrogen Plastic Welder (several options available)
- Polypropylene Welding Rod (several sizes/colors available). ...
- 6125 Tapered Burr
What to do when your bumper cover is loose?
There are four possible reasons your bumper cover is loose:
- Broken clip: A clip slides into a bumper cover clip mount, and the tip of it sticks into the body of the car.
- Broken mounting tab: A tab is plastic welded onto the bumper cover, and protrudes into the body or grille.
- Broken clip mount: Clip mounts are molded into the inside of the bumper cover, and they look like slots.
How much does it cost to replace a plastic bumper?
The average cost to repair plastic bumpers ranges from approximately $150-$450. However, the cost to replace a bumper in the event of extensive damage can be anywhere between $800-$1,300. In many cases, your insurance should cover the repair. But, if your deductible is higher than the cost of repair, you should consider paying out-of-pocket.
How do I remove rear bumper plastic cover?
- Rear Bumper Cover PP/EPDM material Removing and installing. ...
- Back-up Lights Remove only when bumper cover -1- has been removed. ...
- Rear Reflector Remove only when bumper cover -1- has been removed. ...
- Spoiler PC/ABS material Engaged in rear bumper cover -1-. ...
- Towing Eye Cap Engaged in rear bumper cover -1-.

What is used to repair a plastic bumper cover?
The filler they used is 3M Automix 5895, a two-part flexible epoxy adhesive designed to repair TPO plastics. TPO stands for Thermo Plastic Olefin and is what many bumpers are made of. The filler comes in two tubes.
Can you repair plastic car bumpers?
If your plastic bumper has scuffs and scratch damage, the repair can be carried out just on the front side of the bumper. However, any cracks or splits should be repaired from the front and back.
How do you fix a ripped bumper cover?
0:544:56Repairing a Long Tear on a Bumper Cover - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe will tape the front. The grind v-grooves along the cracks using a 6125 tapered berth rough up theMoreWe will tape the front. The grind v-grooves along the cracks using a 6125 tapered berth rough up the plastic surrounding the crack using a 36 grit roll lock disk. You may now begin welding.
Can you repair a plastic front bumper?
Fortunately for your bruised bumper, plastic repair and refinishing materials are widely available and reasonably simple to use. Fixing damaged plastic bumpers involves grinding, sanding, sculpting, and painting, but it's worth the effort for repairs that would cost less than your deductible.
What is the best way to repair a plastic bumper?
0:503:13Proper Repair of Crack or Tear on Plastic Bumper Products - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a DA with P 80 grit to rough up the backside for the reinforcement repair blow off the repairMoreUse a DA with P 80 grit to rough up the backside for the reinforcement repair blow off the repair with clean dry air and apply a light coat of adhesion. Promoter. Allow ten minutes of drying time.
How do you touch up a plastic bumper?
2:2815:18How to Repair a Scuffed or Damaged Car Bumper for less than $100YouTubeStart of suggested clipEnd of suggested clipIt's basically just just an epoxy it's two parts you mix them together and it's this nice blackMoreIt's basically just just an epoxy it's two parts you mix them together and it's this nice black rubber.
How do you fill a hole in a plastic bumper?
2:077:20How To Repair a HOLE in a Plastic Bumper Cover! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it's kind of jagged II and you busted a piece out. All you do is take a piece of cardboard. AllMoreAnd it's kind of jagged II and you busted a piece out. All you do is take a piece of cardboard. All right do the same thing put your wax tape around the backside.
How do you repair plastic body panels?
0:5020:18How To Repair Broken Plastic Car Parts - YouTubeYouTubeStart of suggested clipEnd of suggested clipI like using toothpicks here to actually apply the epoxy. Now depending on how nice you want theMoreI like using toothpicks here to actually apply the epoxy. Now depending on how nice you want the final product to look we're going to use various grits of different sandpaper.
How do you fix flexible plastic?
4:038:243M™ Flexible Plastic Repair - Method Comparisons for Bumper RepairYouTubeStart of suggested clipEnd of suggested clipApply auto mix easy Sam flexible parts repair material to the damaged area a tight coat is followedMoreApply auto mix easy Sam flexible parts repair material to the damaged area a tight coat is followed by additional layers. Building up the damaged.
How do you fix hard plastic?
2:028:11How to Fix Broken or Cracked Plastic or Weld Plastic - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what I want to do is build up plastic on top of this whole area okay and when I do this I'm goingMoreSo what I want to do is build up plastic on top of this whole area okay and when I do this I'm going to squeeze that gap together. So it doesn't leak through so to do this I'm using superglue.
How do you fix broken plastic?
To fix broken plastic, start by getting some super glue or high-strength plastic glue. Then, apply some of the glue to the broken edges of the plastic. Next, press the broken edges of the plastic together and apply constant pressure for 30 seconds.
Can dents in plastic bumpers be repaired?
To fix a dent in a plastic bumper, you have to apply heat and then force the plastic back into its original shape. Here are a few strategies to remove a small dent from a car: Apply boiling water to the dented area. Reach under the wheel well and try to pop out the dent.
Can you repair a plastic bumper with fiberglass?
A plastic bumper repair is an easy weekend body repair job to help beautify your car by getting rid of deep scratches and cracks. One option for this type of repair job is to use a fiberglass body repair compound such as Bond-O.
Can you buff out scratches on plastic bumper?
Step 1: Lightly rub the scratched area with 3,000 grit sandpaper. If you don't have any sandpaper, you could also use non-gel toothpaste to buff the area. Step 2: Wipe down the surface with a microfiber cloth to get rid of any particles or debris.
How do you fix plastic fenders?
0:5424:37EASY PLASTIC REPAIR! Plastic Welding, Hot Staple, ATC, ATV ...YouTubeStart of suggested clipEnd of suggested clipItself. And then we'll go even a step further than that.MoreItself. And then we'll go even a step further than that.
What to use on a torn bumper cover?
Saturate both surfaces of the torn bumper cover with our Poly Prep, an adhesion promoter for polymers. (Don’t make the mistake an entire industry has made in not using a sufficient amount of adhesion promoter.
How far should a tech patch extend?
Tech-Patches should extend from a half-inch to and inch beyond the repair. Link Tech-Patches is below. To reinforce a bumper cover repair, you will need a Tech-Patch and a Poly Kit.
Is a torn bumper cover better than epoxy?
We KNOW that the Process repairs a torn bumper cover better than any epoxy , better than plastic welding, better than any other methodology. Which is why our 100% customer satisfaction guarantee has never been utilized. Molecular Bonding Online Store. If you have ANY questions, please call 877 565 7225.
Is it easy to repair a plastic bumper?
With the Process, repairing a plastic bumper cover is quick and easy. The father explained that the two edges of the torn bumper cover had to properly aligned when pressed together because grab is almost immediate. His son said, “Dad, it’s an adhesive. There’s always some work time”.
Can you tear a bumper cover?
Yes, if you would pull the two edges apart, the tear will be along the same line. However, when you look at that tear, you will see that about half the tear was new and about is along the original is along the original problem. The Process bonds the torn pieces of the plastic together and the longer your wait before ripping the plastic bumper cover apart, the more that tear will be new.
How to repair a bumper?
Apply structural repair material to a backing re-enforcement piece, enough to cover at least 1 inch around the back side of the repair. Apply the backing material piece to the back side of the bumper and the let the material ooze out through the holes and groove, then gun some more material while it is still wet and place a contouring plastic on the top and spread it out using a spreader or your hand to match the contour of the bumper edges.
How long to wait to fix mold on bumper?
The faster you get on it after the cleaning the better your repair will be. Apply Adhesion Promoter on both sides and wait at least 10 minutes or what ever the manufacturer recommends.
Can you use sanding paste on plastic?
Do not use sanding paste on raw plastic. Sanding paste is not part of the plastic repair system mentioned above nor solvent based wax and grease removers. These products will contaminate the plastic. You will have mold release freshly activated by wax and grease remover solvents. That's not good. Always use the cleaning agent the manufacturer recommends.
Can you fix a TPO bumper?
TPO is repairable, but you have to take two precautions without exception. If you can fix TPO bumpers, you can fix the thermo set the same way, if you are not sure which of the two you have on hand, treat it like TPO.
What to do if your bumper is cut?
If the bumper is cut or torn through completely, make sure to scrub the inner and outer surfaces. After rinsing and letting the surface dry, wipe the area with prep solvent, moving in only one direction. Ask Question.
How to repair a bumper with a 400 grit paper?
Once the primer has hardened, dry sand the repaired areas with 400-grit paper to level it and remove any imperfections. Before spraying the bumper with basecoat, wetsand it and gently wipe the area with a tack rag to remove dust, then spray according to the manufacturer's instructions.
How long does it take for a fascia to dry before painting?
When the repair is completed, apply two wet coats of flexible part sealer. After drying for 30 minutes , the fascia is ready for priming and painting. Prime the fender with two coats of any two-part primer-surfacer, making sure to let the primer dry between coats.
How to repair a tear in the back of a fascia?
If the cut or tear is large, you might have to align and then hold the edges of the repair with masking tape on the front of the fascia. Use self-stick fiberglass-repair tape to add structure to the cut or tear.
Can you repair a bruised bumper?
Fortunately for your bruised bumper, plastic repair and refinishing materials are widely available and reasonably simple to use. Fixing damaged plastic bumpers involves grinding, sanding, sculpting, and painting, but it's worth the effort for repairs that would cost less than your deductible. Ask Question.
How to repair a plastic bumper?
The first step in repairing a plastic bumper is to clean the wound, so to speak. Anything that's breaking the natural contour of the bumper needs to be cut off; those pieces sticking out will prevent you from creating a smooth surface with the patch. Large pieces can be cut off with a razor blade. Any small burrs or sections can be sanded down with 80- or 100-grit sandpaper. Next, clean the back of the bumper as well as you can and scuff it with your sandpaper.
How much does it cost to repair a bumper?
That's costly, but probably worth it if you own an expensive vehicle. But if you aren't obsessed with perfection, or the value of your vehicle doesn't support spending that much money on the repair, you can do it yourself for less than $100. If you've just got a chip in the paint, that repair is even easier.
How to fix a hole in a car?
Soak the cloth with fiberglass-impregnated body filler and press it onto the back side of your damage holes. Allow at least three hours for the repair patch to set before proceeding to the next step.
Can you paint a bumper with a spray can?
You can do this at your auto parts store or online as long as you know the make and model of your vehicle. Touch-up paint is sometimes sold in a spray can, which makes applying it easy. But for whole-bumper repaint jobs, you may be better off renting a professional paint sprayer.
Repairing a rigid polypropylene bumper cover
Polypropylene bumper covers are thinner than flexible covers providing less surface area to work with. There is an additional challenge when a rigid bumper cover tears. Often, the plastic stretches making a flush fit difficult. Check the instructions below on for a step-by-step guide in making the repair.
Rigid bumper cover case study
There have been hundreds of torn bumper covers successfully repaired with our patented Polymer Bonding Process (Process). Our best bumper cover repair testimonial emphasizes that the speed in which the edges are bonded is another challenge that needs to be addressed.
Video for the repair of a rigid bumper cover
If your damaged bumper cover is a flexible polyurethane, please go to our Video Library (button at bottom of page) to view that video. Repair procedures are different.
Instructions for repairing a rigid (polypropylene) bumper cover
What differentiates the repair of a rigid bumper cover from one that is flexible is how and when our Activator/Accelerator (AA) is used. Again if you are repairing a flexible bumper cover please go to that page.
