how to repair plastic rattan chairs

How to Repair Rattan Furniture

• Step One: Scrub clean Using your soap and brush, give the rattan a good scrub. For thinner, more fragile cane I would...
• Step Two: Clip Off Broken/Damaged Rattan Using your scissors or wire cutters, trim away any damaged or broken rattan.
• Step Six: Paint (optional)

Full Answer

How to make over a rattan chair?

Steps for updating a rattan chair:

1. Clean in the Grooves. Gently clean in the grooves using the brush attachment on a vacuum.
2. Wipe the Rattan Clean. Wipe the rattan with a damp cloth to remove and dirt and residue. ...
3. Apply the First Coat. Put on gloves and a mask and place a drop cloth under the chair. ...
4. Coat the Details. ...
5. Apply the Second Coat. ...

How to reupholster a chair at home?

• If you need to, add small L-shaped braces on the bottom of the chair where the legs attach to the seat. ...
• Depending on your chair, you may need to wait to do this until after you've reattached the fabric.
• With some legs, you may need to glue them back in place to the seat. ...
• If 1 leg is shorter than the others, add a nail-in glide to the bottom.

How to replace Rattan on a chair seat?

Weaving Rattan Back Into Place

• Removed the Damaged Weave
• Remove each piece of the damaged weave. ...
• Soak the New Weave in Water
• Soak the new weave in a tub of water for about 20 minutes, until the pieces become flexible. ...
• Note: Rattan weave is available at arts and craft stores or at cane and basket supply shops. ...
• Interlace the Weaves

More items...

How to refinish rattan?

• Gently clean. The first step in sprucing up your rattan is to give the furniture you have a gentle clean to start with, wiping away or vacuuming any dirt or ...
• Freshen up the feet. ...
• Oil it up. ...
• Replace the weave. ...
• Freshen up. ...

Can plastic rattan be repaired?

Although plastic wicker rattan is weather-resistant, the strips can get frayed or cut. You can repair the furniture by replacing the plastic rattan weave on your own with the right tools.

How do you recover plastic rattan furniture?

How to repair Rattan StrandsTake some epoxy resin, you can buy this here.Take a small amount of the Epoxy Resin and cover the break of the strand.Sculpt the epoxy using a small took to look similar to the surrounding weave.Leave to harden for at least 48 hours.

Can rattan chairs be repaired?

Loose strands of rattan or cane can just be glued back into place with Superglue. If there are pieces of weave missing, replace with new material, usually available from a craft outlet. Cut the old strands out back to good cane.

How do you repair plastic garden furniture?

0:0317:52How To Fix Broken Plastic Garden Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipToday we're going to try and fix this cracked plastic chair here. And we're going to use the goodMoreToday we're going to try and fix this cracked plastic chair here. And we're going to use the good old jb world again now once it's all mixed up.

How do you fix a broken plastic chair?

0:284:53How to Fix broken plastic chair in 4 minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo first things first is to apply hot glue like you saw i just did so and attach it to you know backMoreSo first things first is to apply hot glue like you saw i just did so and attach it to you know back to the base of the chair. So i just apply the hot glue around the surface.

Can you paint plastic rattan furniture?

What is this? I know it seems wild, but yes, you can paint plastic wicker furniture and make it a whole new color. The key to any successful project is getting the right supplies. We used Krylon® Fusion All-in-One™ for a few reasons: it adheres to pretty much any surface, it's durable, and it's great for outdoors.

How do you fix a synthetic rattan?

How to Fix Faux Wicker Patio FurnitureClean the Faux Wicker Patio Furniture. ... Remove Broken and Frayed Ends. ... Cut a New Resin Strip to Fit. ... Apply a Quick-Set or Non-Quick-Set Epoxy. ... Weave the Strip Into Place. ... Glue the Ends Together Before Trimming. ... Touch Up the Section as Necessary.

How do you fix a hole in a rattan chair?

How to Repair a Rattan ChairSand the Weave. Sand the sides of the rattan at the points where it will be reattached, using 200-grit sandpaper. ... Apply Wood Glue. ... Join the Pieces Together. ... Removed the Damaged Weave. ... Soak the New Weave in Water. ... Interlace the Weaves. ... Glue the Weaves Into Place. ... Trim Off Excess Pieces.

How do I fix unraveling rattan?

To fix unraveling cane, use the same method of steaming and clamping. After the pieces are cool, unwrap the cane, apply a little adhesive, and reclamp. This may be enough to hold it. If not, add a hidden staple at the end of the cane.

How do you restore faded plastic wicker furniture?

0:112:27How to Rejuvenate Plastic Patio Furniture - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm going to show you how to rejuvenate your plastic patio furniture a quick splash of color canMoreI'm going to show you how to rejuvenate your plastic patio furniture a quick splash of color can breathe new life into their tired or worn appearance.

How do you restore plastic wicker patio furniture?

How to Fix Faux Wicker Patio FurnitureClean the Faux Wicker Patio Furniture. ... Remove Broken and Frayed Ends. ... Cut a New Resin Strip to Fit. ... Apply a Quick-Set or Non-Quick-Set Epoxy. ... Weave the Strip Into Place. ... Glue the Ends Together Before Trimming. ... Touch Up the Section as Necessary.

How do you revive plastic patio furniture?

You can use Vaseline or other petroleum jellies to make your plastic furniture shine again. It's a fairly simple process. Clean well with a mild household abrasive, like those we've mentioned above. Rinse and let dry completely.

How do you remove oxidation from plastic chairs?

Laundry Detergent Simply take a tablespoon of detergent and mix it with hot water, either in a spray bottle or bucket. You can spray the solution on the chairs and use a soft-bristled brush to rub it in or use a sponge to clean your chairs. Once you're done, you can use a hose to wash the solution away.

How long does it take for resin to dry?

Leave the resin to dry for roughly 48 hours, before using paint or a dye to match the colour of the resin to the rest of the weave.

Can you use soldering iron to fuse rattan?

Instead of attaching the additional weave piece with glue however, a soldering iron can be used to melt the plastic material of the rattan enough so that it can be fused with each of the loose ends.

How to clean rattan cane?

Step One: Scrub clean. Using your soap and brush, give the rattan a good scrub. For thinner, more fragile cane I would recommend a soft toothbrush. The rattan on my shelf was pretty sturdy so I used a larger, scrubbing brush.

How long should I soak a rattan coil?

Once your rattan is purchased, soak the coil in water for 20 minutes. If you omit this step your rattan will be very stiff, brittle, and difficult to work with. I used a large bowl of water and kept it nearby while working with the rattan to prevent it from drying out.

How to repair a chair that is woven?

First, remove the damaged strips. The strips can be long, and you need to pull the whole strip. Take a new strip and soak it in warm water for at least 15 to 20 minutes.

Why is plastic wicker furniture durable?

Plastic wicker furniture lasts for a long time because they are durable and weather resistant. If you clean the furniture regularly, it will give you a nice look that outlasts regular wicker furniture. Another benefit is that it is lightweight, making the furniture, like plastic rattan tables and chairs, easy to move.

How to fix loose resin strips?

If the resin strips are loose, you can reattach them with glue. You can use resin epoxy. Dip the tip of the strip in the epoxy and hold it in the weave for a few seconds. If the strips are cut or frayed, you will need to repair them differently.

How to match furniture color?

Try to match your furniture’s color or you will have to do a touchup with matching paint. Then, you will need a pair of needle-nose pliers. For the finishing touch, you will need a paintbrush and a similar colored paint. Spray paint will also do the job to match your color or redo the color of your furniture.

How to insert resin strip?

To insert the new resin strip, start from the back of the furniture. Insert the new strip in the open space by following the original pattern. Take a pair of needle-nose pliers. In the end, you will need to weave the end of the strip on the backside of the furniture.

Is plastic wicker good for outdoor furniture?

Outdoor furniture made with plastic wicker is trendy because of the weave design that gives a comfortable lounge experience. The sturdy rattan-like weave adds a refined feel to your garden, patio, and backyard. Although plastic wicker rattan is weather-resistant, the strips can get frayed or cut.

Can you glue plastic ends together?

Tip: For glue, you can also use a precision heat gun to “melt” and weld the plastic ends together. This option will require you to have practice with spare plastic strips to avoid melting a hole in your furniture. Another option is using a glue gun, although it requires care to avoid the messy glue gun look.

How to repair rattan?

Fill a large bowl with water and submerge your rattan strands. Set a timer for 30 minutes— this makes the rattan material nice and flexible, and makes it a lot easier to work with during your repairs. Before continuing with the repairs, blot away any excess water from the rattan material.

How to keep rattan furniture in place?

Rattan furniture stays in place via tight “wrappings” along the edges of the furniture. If one of these wrappings gets loose, it could through the whole weave pattern out of whack. Pull these loose sections taut and wrap them back around the side of your furniture. Then, secure them in place with super glue.

How to repair a broken rattan strand?

1. Cut away any broken rattan strands. Take a close look at your rattan furniture and pinpoint where the broken or damaged strands are. Then, grab a pair of pliers or scissors and make 2 cuts—1 on either end of the damaged rattan strand.

How to secure rattan ends?

Secure any loose ends back into place with super glue. After a lot of use and time outside, rattan ends can look a little worse for wear. Not to worry—simply squeeze a dot of super glue along each end, and tuck them back into the weaving. Then, wait for the glue to dry and seal before using the furniture again.

How to spot scratches on rattan furniture?

If you spot any, warm up the surface with a hairdryer while rubbing away the blemishes with a cloth.

How long does it take to glue rattan?

Press the glued end of the rattan strand in place for 5 minutes. Find the trimmed end of rattan, where you cut away the damaged section of material. Press the glued section of rattan on top of this section, letting the glue dry and harden for 5 minutes.

How to get rid of holes in rattan?

Tighten loose rattan pieces with a screwdriver to get rid of holes. Sometimes, loose rattan weaving looks warped, creating “holes” in your furniture. Locate the specific strands of rattan material that look loose and warped. Then, slide the end of a flathead screwdriver beneath the end of the strand.

What to do if your patio chair leg breaks?

Some plastic patio chairs have legs that slip into a molded bracket. If the leg breaks, you can purchase a replacement and simply insert it in the bracket. Make sure that the replacement part is the same size as the broken one.

Can plastic furniture break?

Plastic furniture is probably going to break eventually. If you are concerned that you will not be able to replace your particular brand or style later, purchase extra pieces to begin with. If all else fails, plastic is relatively inexpensive, and you can replace the damaged chairs, avoiding the hassle of making repairs, and the risks of the repairs not holding. The decision is up to you, but you should keep in mind that once the original design has been compromised, the chair is not likely to ever be as good as new again.

Can you fix a plastic chair?

If you have a damaged chair, and a reasonable idea of how it can be repaired, it may be worth a try. With plastic, there is no guarantee that any repair will last for long .

Can you repair plastic patio chairs?

Repairing Plastic Patio Chairs. Most plastic patio chairs are not built to take repairs. While some have removable legs or other pieces, most are molded units that have few, if any, moving parts.