How to fix 5 common PS4 controller issues
- Use your tiny Phillips-Head screwdriver to remove the four screws on the back of your DualShock controller.
- Use a pair of tweezers inside of the seam of the controller to pull it apart at the bottom. ...
- Use a pair of tweezers inside of the seam of the controller to pull it apart at the top. Start near the Share and Options buttons and then move onto...
How do you fix a PlayStation 4 controller?
Reset your controller
- Unplug and turn off your DualShock controller.
- Find the reset button on the back of your controller near the L2 button.
- Use a small tool (like a paperclip) to push and hold the reset button for at least 5 seconds.
- Connect the controller to the console with a USB cable, and press the PS button.
Why is my PS4 controller not working properly?
Solution 1: Power Cycling PS4 and connecting with USB cable
- Power down your PS4 device from the front of the console and put it in sleep mode.
- Once all the lights from the console disappear, unplug the power cable from the outlet.
- Now press the power button on the PS4 for 30 seconds to make sure all the power is drained.
- Now connect the controller to the PS4 with a micro USB cable. ...
How to clean a PlayStation 4 controller?
Stick the cotton in between the controller's buttons and gaps.
- Use a toothpick to get dirt that your cotton swab can't reach. Just be careful not to jam it in too hard and damage the buttons.
- If you're having a hard time cleaning the button gaps, focus on the surfaces.
- Wipe the buttons down with a clean cloth or towel when you're finished.
How to reset your PlayStation 4 controller?
Reset PS4 Game Controller. First turn off your console. The Reset button is located in a tiny hole at the back of the controller near the L2 button. Using a paperclip, press and hold the Reset button for a few seconds. This should be enough to reset your controller. The next step is to once again pair your controller with your device.
Can PS4 controllers be repaired?
Yes, GameStop will fix your PS4 controller. They have a dedicated controller repair service called the Controller Fix. It is one of the many services that they offer to customers.
Why is my PlayStation 4 controller not working?
Here are some possible causes, according to Asurion Experts: The controller's battery is dead. The controller was recently paired with another device, like a different PS4 or PC. The controller is too far from your PlayStation and is no longer connected via Bluetooth®.
How long does a PS4 controller last?
Typically, the DualShock 4 lasts for four to eight hours of play per charge (typically on the lower end of that range), far less than the Xbox One controller or the Nintendo Switch Pro controller. Why does the DualShock 4 battery die so quickly?
Why is my PS4 controller blinking and not working?
There are two main reasons you might see the flashing white light on your DualShock controller: either the battery is dying, or the controller failed to connect to your PlayStation console.
How to reboot PS4 controller?
If your controller is working enough to access menus, hold the PS Button to open the Quick Menu, then go to Power > Restart PS4 to reboot your system. In case your controller isn't cooperating, press and hold the Power button on your PS4 console until you hear two beeps.
How long is the warranty on a PS4 controller?
Like most hardware, DualShock 4 controllers have a one-year warranty. If you bought your PS4 controller within the last year and can't fix it with all the above tips, you should visit PlayStation's Fix & Replace page to put in a request for repair on your controller.
How to check battery life of PS4 controller?
To check your controller battery life, hold the PS Button to bring up the Quick Menu on the left side of the screen. You'll see a controller icon with battery display at the bottom. Plug your controller into your PS4 and visit the Quick Menu again to make sure you see the battery charging animation.
How many controllers can you have on PS4?
Your PS4 will remember it until you pair the controller with another device in the future. Keep in mind that the maximum number of DualShock 4 controllers you can have connected to the PS4 at once is four. If you already have four controllers connected, you'll need to disconnect one to make room for more.
How to turn off PS4 controller when idle?
If you don't want your PS4 controller to turn off when you're watching media apps like YouTube, go to Settings > Power Save Settings > Set Time Until Controllers Turn Off and choose Never.
What to do if your controller doesn't work?
If removing and re-pairing the controller didn't work, you can next try the full reset procedure for the DualShock 4. You'll need a small pointed object, like a bent paper clip or a SIM card ejection tool, to do this.
How to get PS4 to stop deleting memory?
Head to Settings > Devices > Bluetooth Devices and select the DualShock 4 entry —it's the one that does not have a green light next to it. On the resulting menu , press the Options button on your controller and choose Forget Device. This will cause your PS4 to remove it from memory so you have to re-pair it again.
How to clean a PS4 controller?
Clean your PS4 controller. Gently wipe around the crevices of the analog stick with a dry microfiber cloth. To get rid of grime, use a cotton swab dipped in a mixture of water and isopropyl alcohol. If you see dirt that you can't reach, you can use pressurized air to dislodge it.
Why does my PS4 controller drift?
Causes of PS4 Controller Drift. If your character or the camera keeps moving when you're not touching the controller , the problem's source is likely analog stick drift. PS4 controller drift can be due to one of two things: The analog stick is dirty . The analog stick or the potentiometer is damaged.
How to clean a controller input?
To deep clean the controller inputs, you must remove the outer casing and lift the battery to access the motherboard. Use a cotton swab and a mix of water and isopropyl alcohol. Do not use pressurized air on the interior parts.
What happens if you clean a controller?
The analog stick or the potentiometer is damaged. You can expect general wear-and-tear from frequent use. If cleaning the controller doesn't fix the problem, you should look into getting your controller replaced or repaired before disassembling it.
Can you open a PS4 controller if the warranty is expired?
Removing the outer casing will void the warranty on your PS4 controller, so open it up only if the warranty has expired.
How to replace battery in PS4 controller?
To replace a PS4 controller battery, you have to disassemble the controller. Check for a loose USB connection. With a USB cable plugged into your controller, gently prod the connector. If it feels loose, or it comes out easily, then there may be a problem with the socket or the cable connector.
What to do if PS4 controller doesn't work?
If that doesn't work, or you don't have a second controller, then try a hard reset.
How to fix a PS4 controller that won't connect?
How to Fix a PS4 Controller That Won’t Connect. To figure out why your controller isn't working correctly, and get it connected to your PS4 so you can start playing again, perform each of the following steps in order. Use a USB cable . Your goal is probably to play wirelessly, but the first step is to make sure that your controller actually works. ...
Why won't my PS4 controller connect?
Sync issues represent the most common reason that PS4 controllers fail to connect. The controller may become desynced on its own, or someone may have synced it with a different console or device. In some cases, a firmware issue with the controller may even prevent it from syncing up correctly.
Why does my controller light up when plugged in?
If your controller lights up when plugged in, that's a good hint that it's probably working. However, it may be providing power but not a data connection. To be sure that your USB cable is actually working, try it with a different device.
Can you charge a PS4 controller with a USB cable?
Make sure the battery works. If the controller doesn't power on, then try charging it. If it still doesn't power on, even when plugged into the PS4, then suspect the battery.
Can you connect a PS4 controller to a PS4?
If the cable works, you can proceed with trying to sync your controller. Sync your PS4 controller. If your PS4 controller is no longer synced to your console, then it won't connect.
What to do if PS4 controller is not working?
What to do if your PS4 controller trackpad is not working. Turn off your controller and back on again. Make a 50/50 measured solution of isopropyl rubbing alcohol and water. Use a microfiber cloth to slightly dampen with the solution. Source: Android Central. Use the microfiber cloth to clean your trackpad.
Why can't my PS4 controller hold a charge?
This is because batteries tend to degrade over time, and some of them degrade so harshly that they can fail to hold a charge for more than an hour.
How to connect PS4 controller to DualShock 4?
First, try plugging your DualShock 4 into the PS4 using your USB cable. Source: Android Central. Press and hold the PlayStation button on the center of your controller. This will prompt the controller to resync. If your DualShock still isn't connecting to your PS4, try these steps instead. Turn off your PlayStation 4.
How to clean a controller?
Use a microfiber cloth to slightly dampen with the solution. Use the microfiber cloth towel to wipe around the exterior of the buttons. Do not press too hard so you can avoid squeezing the solution off of the cloth and into your controller. Allow the controller to dry entirely before attempting to turn it on again.
How to pull a controller apart?
Use a pair of tweezers inside of the seam of the controller to pull it apart at the bottom. Start with one side of the controller at the bottom of the handles and then move to the other. Do not start in the middle. Use a pair of tweezers inside of the seam of the controller to pull it apart at the top.
Why won't my controller turn on?
If your controller is dying too fast -- or worse yet, it simply won't turn on -- it could be due to a bad battery. Replacing it is pretty easy, thankfully. All you'll need to do is buy a replacement battery, a pair of tweezers, and then follow the instructions below.
How to get dust out of DualShock?
Get a can of compressed air. While the nozzle is two to three inches away from the charging port, blast air inside in short bursts to knock the dust loose. Do your best to knock all of the dust out of the DualShock, and don't just knock it loose. Source: Android Central.
Summary
It’s annoying to encounter the PS4 controller drift issue. How to fix PS4 controller drift? This post from MiniTool gives solutions to you and also introduces the reasons for the PS4 controller drift issue. Now, keep on your reading.
Solution 1: Reset Your PS4 Controller
How to fix stick drift PS4? You can reset your PS4 controller. Here is how to do that:
Solution 2: Clean Your PS4 Controller
How to fix PS4 controller drift? Use a dry microfiber cloth to gently wipe the gap of the analog rocker. To remove dirt, use a cotton swab dipped in a mixture of water and isopropyl alcohol. If you see unreachable dirt, you can use compressed air to remove it.
Solution 3: Contact Sony
If your controller is relatively new, it may still be under warranty. Go to the PlayStation Repair and Replacement page, select DualShock 4, and follow the prompts to see if you are eligible for free repair or replacement.
Solution 4: Disassemble the PS4 controller to Clean the Analog Stick
To perform a deep cleaning of the controller input, you must remove the casing and lift the battery to access the motherboard. Use a cotton swab and a mixture of water and isopropyl alcohol. Do not use pressurized air on internal components.
Solution 5: Replace the PS4 Analog Stick
If you want, you can try to replace the analog joystick and potentiometer (the sensor of the analog joystick). In addition to the parts that can be purchased online, you will also need a soldering iron. Unless you want to do it yourself, buying a new controller is a cheaper and simpler solution.
