- Remove the blinds from the wall and pop out the clutch. Most roller blinds will have a little pin on the side opposite the cord.
- Pull the chain out. Search the chain for the connector first. Depending on the style, you may be able to pop one of the ends out of the connector.
- Thread one end of the chain up through the guard. Hold the clutch with the barrel facing upwards and the base facing down.
- Press the chain into the pulley teeth. Hold about an inch (2.54 centimeters) of so of the chain against the pulley teeth.
- Rotate the pulley teeth and pop the chain into place. ...
- Pull the chain through the clutch. Rotate the pulley teeth until the chain comes out of the right side of the guard.
- Reassemble the blinds and hang them back up. Pop the clutch back into the blinds first, then hang the blinds back up on the wall.
- Reassemble the chain. Feed the chain through the bottom roller, then bring both ends together. If this is a new chain, you may need to trim it down first.
Full Answer
What happens if you pull the chain off a roller blind?
Roller Blinds are operated via a simple chain system. If you’ve ever pulled the chain in the wrong way it can lead to stuck the chain inside the plastic wheel and eventually pops off the mechanism so no longer you can control your roller blind with the chain. Fortunately, these are also easy to fix.
How to replace roller blinds?
First of all, carefully retract two brackets from the wall so you can remove the roller blind and take it to your hand. If your blind is in the down position make sure you roll it up to the maximum. Now take the blind to a flat surface and carefully remove the chain mechanism wheel from it.
How do you remove a chain mechanism from a blind?
If your blind is in the down position make sure you roll it up to the maximum. Now take the blind to a flat surface and carefully remove the chain mechanism wheel from it. Then you’ll find a screw that needs to be removed using a standard screwdriver in order to access the inner section of the chain wheel.
How to fix a wheel that won’t fit on a blind?
When you screw the nut hold the opposite edge of the wheel so you won’t lose any parts when you are tightening it. Now the wheel is fixed with the chain. Next, insert the wheel back to the blind. Now you are almost finished fixing it.
How do roller blinds work?
Who replaced broken cords on roller shutters?
How do you fix a roller blind chain?
2:234:28How to fix a roller blind chain that has come off its track - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo simply just grab your chain. Put it back onto. The the grooves with a chain sets push the cap.MoreSo simply just grab your chain. Put it back onto. The the grooves with a chain sets push the cap. Back on and once you've done that put the screw back into the middle.
How do you fix a broken bead chain?
0:351:29Fixing the Beaded Chain Connector. - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne of the the beads on the beaded chain into one side find the other end of the cord. Place. ItMoreOne of the the beads on the beaded chain into one side find the other end of the cord. Place. It into the other side and then I'm carefully going to swing. The hinged piece shut.
How do you replace a metal chain on a roller blind?
0:001:08How to Replace Stainless Steel Chain on a Roller Shade - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure it the beads on the chain go into the where they need to go. And once they're there. ThenMoreMake sure it the beads on the chain go into the where they need to go. And once they're there. Then we just push it back into place and make sure we push this part.
Can you replace the cord on a roller blind?
Roller blinds are easy to use and install. They are great for providing deep, dark shade. Sometimes, however, the cord or chain may come loose; other times it may become worn and need to be replaced. Luckily, it is easy to replace the chain or cord.
How do you replace beaded chain on blinds?
1:533:03How to Replace Chain In a Rollease Roller Shade Clutch - YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the chain at the first bead outside of the clutch. Pull the chain down and install the stopMoreHold the chain at the first bead outside of the clutch. Pull the chain down and install the stop ball two beads above the bead you are holding.
How do you fix the pull cord on a blind?
1:092:49How do I fix the pull cord on my Hunter Douglas blinds? - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then we're simply going to snap them together to hold that all in place. So those are back inMoreAnd then we're simply going to snap them together to hold that all in place. So those are back in make sure none of these little pieces popped out again um. And make sure this is all aligned.
How do you join bead chains?
1:282:10How to Cut Ball Chain and Attach a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it into that middle area. And pull it over to the side there's this little slit right here thatMorePut it into that middle area. And pull it over to the side there's this little slit right here that allows you to actually drag the ball over and secure it so that you have one ball inside the clasp.
How do you fix a beaded metal necklace?
0:534:58Restringing Jewelry - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can either use the original clasp that came with your broken design or use a new clasp to attachMoreYou can either use the original clasp that came with your broken design or use a new clasp to attach the clasp. You put your beading wire through the hole around.
How do you fix a ball chain necklace?
1:112:10How to Cut Ball Chain and Attach a Clasp - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut it into that middle area. And pull it over to the side there's this little slit right here thatMorePut it into that middle area. And pull it over to the side there's this little slit right here that allows you to actually drag the ball over and secure it so that you have one ball inside the clasp.
How do you join bead chains?
0:491:57Creating an endless chain with Chain Joining Pliers - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we're going to pinch it from the ball although that other end of the chain. This time not quiteMoreSo we're going to pinch it from the ball although that other end of the chain. This time not quite so far just gonna open up enough so you can drop the link of event at the end of the chain. In up
How do you fix a broken beaded bracelet?
1:122:33How to Fix Stretch Elastic Bead Bracelets - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou loop it over once and pull it just so it's tight enough to the beads don't pull it too tight.MoreYou loop it over once and pull it just so it's tight enough to the beads don't pull it too tight. Now you're going to cross it back the other way loop. It two times. And then pull it tight.
Preparing to Replace the Chain on a Roller Blind
Before beginning this repair, you will need to procure a replacement chain or cord for your solar roller shades. It needs to be thin enough you can insert it into the clutch, but thick enough it won’t slip out of place. Bead chain in size #10 is the standard size for roller blinds.
How to Put the Chain Back on a Roller Blind
You are now ready to fix the roller blind chain. Remove the clutch—the round plastic on the end which holds the chain—using your hands or a screwdriver. Some clutch models require you to pop open the cap in order to create enough room to remove and replace the cord. First, flip the clutch over to examine the back.
How do roller blinds work?
Roller Blinds are operated via a simple chain system. If you’ve ever pulled the chain in the wrong way it can lead to stuck the chain inside the plastic wheel and eventually pops off the mechanism so no longer you can control your roller blind with the chain. Fortunately, these are also easy to fix.
Who replaced broken cords on roller shutters?
Called Stan Bond out to replace 2 broken/frayed cords on some older roller shutters. The jobs went very smoothly and the operator, Rob, was excellent - friendly, professional and a real credit to the Stan Bond team. Thanks Rob.
