
- Start by removing the tie wires closest to the damaged section using pliers.
- Next, connect a fence puller to both the post and fence and draw the fence tight enough to take tension off the tension bar. ...
- Remove the damaged section by opening the loop at the top and bottom of a strand just outside the damaged area. ...
- Cut a section of mesh the same size as the one you removed. Cut the mesh using metal-cutting snips or cable cutters. ...
- Weave the new section into the remaining fence using the strands you removed earlier. ...
- Attach a fence puller by sliding a pull bar through the mesh about 4 feet from the end post. ...
- Reattach the tension bar to the tension band and release the fence puller.
- Finally, re-tie the patched fencing to the posts and attach new tie wires to hold the mesh firmly against the top rail and line posts. ...
How to temporarily secure a rotted fence post?
Tools Required
- Gloves
- Safety glasses
- Shovel
- Sledgehammer
How to replace a damaged or rotten fence post?
What you will need:
- Saw
- Fencefast Repair Spur
- Fence Post
- Adjustable Spanner
- Ratchet Set
- Spirit Level
- Fencefast dolly
- Sledge Hammer
How to keep fence post from rotting?
Things You Will Need
- Waterborne copper naphthenate wood preservative
- Wide paintbrush
- Post hole diggers
- Digging bar
- Measuring tape
- 1/4-minus gravel
- Hand tamper
- Level
- Reciprocating saw
- Small paintbrush
How to remove rotted broken fence post without any tool?
- Dig a trench next to the footing and tip the post out.
- Wrap a chain around the post and use a high lift jack to pull the post out.
- Screw lag bolts through a chain into the broken off fence post and then use a vehicle winch/come along/high lift jack to pull the post out.

Can you fix rotten fence posts?
If the fence post is becoming loose and the fence is moving, a concrete repair spur can be used to support the wooden post. If most of the post underground is rotten or the post has snapped, you will need to replace the post entirely (see above for help on this).
How do you repair rotted wooden post?
3:437:27How to Repair a Rotted Porch Post | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipTogether. And i also like the fact that i have a lot more surface right here to glue and screw theMoreTogether. And i also like the fact that i have a lot more surface right here to glue and screw the two pieces together that makes a lot of sense all right so now all i have to do is trace our patch.
How do you replace a rotted fence post?
0:515:33How to Replace a Rotted Fence Post | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy cutting the post above. And below the rail we're gonna release the rail. So they can swing outMoreBy cutting the post above. And below the rail we're gonna release the rail. So they can swing out and then we can work on the post. Now we'll just bang out the pieces of the post with a hammer.
How do you reinforce a rotten fence post?
If you have only a few rotted posts, consider stabilizing them with steel splints or braces. If the post in question isn't set in a concrete footing, E-Z Mender splints are the easiest, most effective hardware to apply. C are made for reinforcing 4 x 4 posts.
How do you repair a rotten wood fence post without replacing it?
0:1610:03Rotten Fence Post How To Fix It Cheaply Yourself - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf. You can get the post into the hole. And then line up the diagonal cuts and screw them togetherMoreIf. You can get the post into the hole. And then line up the diagonal cuts and screw them together with some wood glue on it because if that's the case then the post should be secure.
Can rotting wood be saved?
If you catch rotted wood in time, you can successfully repair it with epoxy resin. Repairing rotted wood means you'll be able to stain or paint it again to blend in with the surrounding wood.
How do you replace a fence post without removing concrete?
The best way to replace a fence post without removing the concrete footing is by prying it out. You can do this with a long lever and fulcrum or a car jack. In either case, nail some wood to the post first to pry against and then get to work. Pry until the post releases from the concrete and comes all the way out.
How do you get rid of rotted fence post below ground?
1:316:59Remove a Rotten Fence Post in MINUTES ! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWithin the top two inches of the fence post in the ground. So above ground two inches below groundMoreWithin the top two inches of the fence post in the ground. So above ground two inches below ground two inches that part of the post. Generally is going to be the part that's rotten.
How do you fix a fence post without removing it?
1:527:34How to Fix a Broken Fence Post in Under 30 Minutes - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe're basically going to hammer it in. So the trick here is to get the easy manner wedged in betweenMoreWe're basically going to hammer it in. So the trick here is to get the easy manner wedged in between the concrete and the fence post.
Does post buddy work?
Yes, Post Buddy will work on a round post, as long as your post is set in a concrete base. It's the concrete base which is important, as it provides a firm, below-ground anchor for our system. You will need to position the Post Buddys as close to directly opposite each other as possible when fixing a round post.
Before Shots of the Broken Privacy Fence
Below is a photo of the fence before I started working on it. It was in pretty rough shape. And not only was it unattractive, but it could have fallen over in a stiff breeze.
The rotten fence posts in a concrete footing
The major problem with the fence, and the reason it wasn’t solid was that the fence posts were rotten at the base. In the picture below you can see I detached the fence railings from the post and the post snapped right off and fell to the ground.
Could I re-use the old concrete footing?
I wasn’t sure if I could -reuse the old concrete footings yet. First I had to get the old fence posts out.
Removing the old concrete footings
I stuck a new post down into the old footings and used the new post as a lever. This allowed me to twist then pull the old footing right out of the ground. This went quickly.
Digging the hole for the new concrete footing
Pulling the old concrete footing out left a decent sized hole so I only had to dig down another foot or so.
Adding gravel to the bottom of the hole
I put about 6-inches of gravel at the bottom of the hole for drainage. So if water did seep down against the wooden post it would drain through the gravel at the bottom and not pool against the post. (Water and wood don’t like to mingle together for long.)
Pouring the concrete to set the new fence post
I bought 3 bags of Quikrete Post Haste concrete mix to fill the one fence post hole.
How to Save a Rotting Fence Post
Topsoil is full of moisture and organisms that will soon start the rotting process on any piece of submerged wood. Once the decay has begun, it’s only a matter of time before a post is so decayed that it will snap when the high winds of autumn come along.
Follow us on
Postsaver manufactures and supplies guaranteed ground-line barrier sleeves that are proven to extend the life of fence and gate posts. With over 7 million sleeves supplied to date, our patented sleeves have been proven in volume use around the world since 1994.
