Spray silicon lube on a cloth and wipe the zipper (again, with the cooler open so you can do both sides. Wipe it several times with the cloth almost wet with silicon lube. Allow to dry.
Full Answer
How do I use my new RTIC cooler?
To achieve maximum performance in your new RTIC cooler you must use it properly. Use plenty of ice and pre-chill the cooler and its contents before placing them in the cooler. We highly recommend using cubed ice. For best performance, always pre-chill food and drinks. Put the ice in the cooler.
How to clean the inside of the soft cooler?
For soft coolers, keep the zipper clean and lubricated with the enclosed lubricant. Clean the inside and outside. Clean the inside with a solution of mild soap and warm water, especially before first use. To remove tough stains, use baking soda and water to clean the inside. Always clean after use, especially if used in salt water environment.
How do I care for my cooler?
Always air dry the cooler with the lid open before storing. This reduces the risk of mold and mildew growth. Keep your cooler away from open fires. Keep your cooler away from chemicals, acids and strong alkali.
How do you get the smell out of a plastic cooler?
Remove odors with a diluted solution of chlorine bleach and water. If odor persists, wipe the interior with a cloth saturated with vanilla extract, then leave the cloth in the cooler overnight. Always air dry the cooler with the lid open before storing.
How do you fix a soft cooler on a RTIC zipper?
0:091:47RTIC Soft Pack Cooler: Zipper Tab Replacement Demo - YouTubeYouTubeStart of suggested clipEnd of suggested clipLevel with the top of the cooler you'll want to open and close the zipper a few times. That shouldMoreLevel with the top of the cooler you'll want to open and close the zipper a few times. That should realign the zipper. Now every soft pack comes with lubricant.
Did RTIC go out of business?
The company plans to continue to operate as normal, according to the statement. Both companies' statements said they would not comment further. Rtic is a direct-to-consumer online retailer that shipped its first cooler in September 2015.
How do I fix my soft cooler eyeliner?
0:541:36Brian Hatch of AO Coolers Discusses Tear-Aid - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust like tape. Put it over the hole. Press it down and the tape actually bonds to the vinyl. MakeMoreJust like tape. Put it over the hole. Press it down and the tape actually bonds to the vinyl. Make sure all the air is out of it. Press it down good and tight.
How do you repair a cracked cooler?
Clean the cooler with a degreasing detergent and dry completely.Sand the crack with fine-grit sandpaper to smooth the edges of the crack and rough up a 1/4-inch area surrounding the crack.Knead two-part epoxy putty by hand until the putty molds easily.More items...
Is RTIC really as good as Yeti?
Among the two brands, RTIC has a longer ice life compared to Yeti. Their large sizes, plastic construction, and thicker walls make them better at retaining ice. Yeti have better quality coolers, although with shorter ice life and smaller sizes. Some coolers claim to have an ice life of 8 days, others even more.
What does RTIC stand for?
RTICAcronymDefinitionRTICRedundant Trusted Internet ConnectionRTICRoad Transport Information and ControlRTICRapid Target in CockpitRTICRiyadh Technology Incubation Center3 more rows
Do soft sided coolers leak?
8:3210:06Leak Testing Budget, Roto Molded & Soft Sided Coolers - YouTubeYouTubeStart of suggested clipEnd of suggested clipNothing so this is in fact sealed.MoreNothing so this is in fact sealed.
How do you keep ice from leaking in a cooler?
If water balloons aren't your style, you could also create one massive block of ice to store in the center of the cooler, using an airtight plastic container, like a Snapware box. Fill it with ice, freeze it, and place the entire container in the center of your cooler, arranging the food around it.
What is inside a cooler bag?
The inside is lined with heavy duty foil. In between the outer and inner layers are layers of materials like flexible foam, which are thin but dense and have the ability to maintain internal temperatures for several hours.
How do I fix a hole in my Yeti cooler?
0:411:36YETI Hopper Repair Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipCenter the patch over the top of the cut and press down for five seconds in order to let theMoreCenter the patch over the top of the cut and press down for five seconds in order to let the adhesive. Take. Hold. Ensure that you have at least a half inch of space all the way around the cut.
How do you repair plastic with epoxy?
How to use 2-part epoxy glue for plasticPut on some gloves and safety goggles and clear the workspace. Put down a sheet to protect your surfaces.Mix the two parts of the epoxy glue. ... Remove the lid from both syringes. ... Apply the epoxy glue to both of the surfaces and press them together. ... Leave it to dry.
How do you repair a hole in a Yeti cooler?
Melt some white drill shavings from another old white ice chest into the holes. It's the same as patching kayaks, they are rotomolded just like a YETI. Also, when you do drill holes in your Yeti save the shavings so you can melt them and refill the holes later if you need to.
Are YETI and RTIC made by the same company?
Launched in 2015, the products from RTIC are mirrors of many coolers and insulated bottles made by YETI. In side-by-side breakdowns, RTIC has worked to show how its coolers are similar to YETI's but cost less. That strategy worked for nearly two years.
Who owns RTIC cooler company?
Wind Point PartnersChicago, IL, September 2, 2020 – Wind Point Partners (“Wind Point”), a Chicago-based private equity firm, has acquired RTIC (the “Company”), the largest direct-to-consumer (“D2C”) eCommerce provider of high-quality coolers, tumblers, bottles, travel bags and other products for outdoor enthusiasts.
Are the owners of YETI and RTIC brothers?
RTIC founders, brothers Jim and John Jacobsen, are also required to make payment to Yeti.
Who came first RTIC or YETI?
Since Rtic is a newer company, their strategy has been different from that of Yeti's. Their strategy has been to take advantage of the two weaknesses of Yeti's coolers: the volume of the coolers and the price.
Where are yeti coolers made?
The other four letter brand is not perfect either.#N#WHERE ARE YETI PRODUCTS MANUFACTURED? Our Tundra coolers are manufactured in the USA at facilities located in Iowa and Wisconsin as well as at a facility located in the Philippines. Our Hopper coolers and Rambler drinkware are manufactured in China.
What to put on a zipper to make it unzip?
Put zipper lube that came with it on it... makes it easy to zip and unzip.
Is RTIC a good product?
The squeaky wheel gets the grease... for every 100 good ones there is a bad one and they yell the loudest.. RTIC make a pretty good product for the price and usually runs good specials. It sucks some people got burned but we are talking about a cooler not a car or boat.
