Repairing Guides

how to repair rv toilet

by Pauline Roob Published 2 years ago Updated 2 years ago
image

How To Repair An RV Toilet

  • The first step is to turn off the water pressure — either by turning off the “City Water” valve or turning off the on switch for the on-board water pump.
  • Flush the toilet to bleed off any remaining water pressure and to empty all water out of the toilet bowl.
  • The toilet will have to be removed in order to work on it, as repairs are made from the rear or bottom side.
  • Remove the 2 bolts (one on each side) that secure the toilet to the floor. ...
  • You might want to lay a cloth rag across the hole to help keep odors at bay, and to prevent anything from falling into the black water tank.
  • Unlike house toilets, RVs don’t use a wax ring to seal the toilet to the drain pipe. Instead, you will have a rubber ring that will act as the seal.
  • Depending on what portion of the toilet your repairs are concerned with, refer to the parts diagram that comes with the repair kit for disassembly instructions. ...
  • If you’re repairing the blade seals, before you reinstall the toilet in the RV, pour a quart of water into the toilet to make sure the new seals will hold ...
  • If you’re replacing the water valve on the back of the toilet, once you have reinstalled the water line, pressurize the water system to make sure the valve doesn’t leak. ...
  • It’s recommended that you install a new rubber seal between the toilet and the floor flange when you reinstall the toilet.

Full Answer

How do you replace RV toilet?

  • You don’t need a dumping station
  • No water which means there is less waste to dispose of
  • Little power needed to consume (only a circulating vent fan)
  • No clogging or disasters with the black tank
  • You don’t have to move your RV to dump the black tank
  • You can also put your kitchen waste in the composting toilet

How to install a new RV toilet?

Set in place on the floor the ring (seal) that came with the toilet, where the old ring has been removed. Position the new toilet in place on top of the new ring. Be sure that the bolts in the floor are inserted through the proper bolt holes in the toilet, and that the ring doesn't move as you're positioning the toilet.

How to remove a RV toilet?

Steps To How to Remove an RV Toilet

  1. Empty the Waste Tank. When you get ready to replace your RV toilet, you’ll need to empty the waste tank. ...
  2. Prepare the Toilet. When it comes to removing an RV toilet, sometimes the easiest and most practical solution is to prepare for the job ahead of time.
  3. Unscrew the Mounting Bolts. ...
  4. Remove the Toilet. ...

How to repair a Thetford Aqua Magic RV toilet?

Typically you can take off the plastic around the foot pedal and then the plastic shroud around the base of the toilet and get at most of the components although it might be a tight fit at the wall. Try tightening the screws if the loose part is the valve cover. Otherwise take a photo of the valve and we should be able to find replacement parts.

image

How do you fix a toilet in a camper?

1:344:01RV 101® - How To Replace an RV Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd remove the old toilet from the floor. Remove and discard the old floor flange seal. And holdMoreAnd remove the old toilet from the floor. Remove and discard the old floor flange seal. And hold down bolts. Make sure the surface of the floor flange is clean and free of any debris or sealant.

How do you fix an RV toilet that won't hold water?

2:254:16RV Toilet Seal Not Holding Water Easy Fix! - YouTubeYouTubeStart of suggested clipEnd of suggested clipBuilt up on there make sure that is really clean having a good clean seal is key to having yourMoreBuilt up on there make sure that is really clean having a good clean seal is key to having your toilet seal properly. Now you can use some of this lubrication.

Why is my camper toilet leaking from the bottom?

If your RV toilet is leaking around the base, the culprit is likely a bad flange seal between the toilet and the black water tank. To repair it, you need to: Buy a new flange seal that matches your toilet model. Shut off the water to the toilet.

How much does it cost to replace an RV toilet?

$180 to $250: This is the price range into which most standard RV toilets fall. You'll find RV-sized toilets that mount to the floor, include flushing capability, and work like a typical toilet. Available in plastic and ceramic, you'll have quite a few options to choose from.

Why won't my toilet bowl hold water?

The toilet tank fill tube may be damaged or incorrectly positioned, preventing the water level from reaching its proper level. Position the fill tube so water is flowing into the overflow tube (the open pipe near the center of the tank). If this doesn't fix the problem, replace the fill tube.

How do you replace the rubber seal on an RV toilet?

2:3610:48EASY RV Toilet Seal Replacement - Thetford RV Toilet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd the bolts that bolted down to the floor are a half-inch. Now the next step is actually to go outMoreAnd the bolts that bolted down to the floor are a half-inch. Now the next step is actually to go out and buy a replacement pack for your seals. Now I got mine on Amazon.

Do camper toilets have wax rings?

Some RV toilets use a wax ring to seal the toilet. Other RV toilets, however, use a rubber ring. The rubber ring won't melt in a hot RV as the wax ring would. Check which ring your RV uses before buying a replacement ring.

Should my RV toilet hold water?

In most cases your RV toilet is being left without water because the blade seal, which is a simple rubber seal, has perished, become damaged or has hardened to the point that it no longer works....RV toilet basics.Key No.Description4Water Module Link5Pedal - WhitePedal - Parchment6Foot Cable9 more rows•Nov 28, 2019

Are all RV toilets interchangeable?

RV toilets use pressurized water from the freshwater tank when the flush pedal is pressed down. Sure, house toilets and RV toilets have the exact same use – to get rid of waste. But they do not work in the same way and are not interchangeable.

How often should you replace the wax ring on a toilet?

20 to 30 yearsIn theory, the wax ring “should” last the lifetime of the toilet, or certainly 20 to 30 years.

What kind of RV toilet do I have?

There is sometimes an identification label on the back side of the toilet at, or near, ground level. Get a mirror if getting to it is difficult. Yes on PEX plumbing supplies. Hardware/RV/big box stores will often stock it or similar.

Can I replace my RV toilet with a regular toilet?

You cannot replace an RV toilet with a regular toilet, for a variety of reasons. The main reasons include wasted water, the weight of a traditional toilet, complicated installation, and durability factors. However, many RV-appropriate toilets can mimic the feel and look of a traditional or regular toilet.

Will a regular toilet seat fit an RV toilet?

Yes, you can sometimes put a regular seat on your camper toilet (standard RV toilet seats). This only applies when you have a standard-sized toilet (or close to it) in your motorhome or trailer. RVs often come with a smaller sized throne than those in home settings.

What is the first step in RV toilet repair?

An important first step with RV toilet repair means understanding the different components and how they all work.

When to fix RV toilet?

Obviously, the best time to take on RV toilet repairs is in the off-season, when you are not using your rig. But whenever it is that you start to work on the problem, be sure and disconnect the water connection and drain the tank to avoid any flooding issues.

What does it mean when a toilet drips?

If there’s a drip from the upper part of the toilet during the flush cycle, it could mean that the rubber seal in the vacuum breaker is cracked or worn .

How to keep RV toilet running?

Other ways to keep your RV toilet running smoothly are to make sure you use proper, fast-dissolving RV toilet paper. Additionally, always use enough water for flushing – but not so much that you’re being wasteful. It’s also a good idea not to use bleach to clean the plumbing system because they can damage the seals.

What are the main parts of a toilet?

The primary components are the water valve, spring cartridge, vacuum breaker, bowl, base, and seals.

What does it mean when water is coming out of the bottom of a toilet?

The water could be coming from the bottom itself, and that means there is a good chance that the flange seal around the base needs to be replaced. If it’s black water, that means it’s seeping back in from the black tank.

Can you replace a toilet in an RV?

Some RV toilet repairs are easy ones, but sometimes there’s nothing you can do but replace the whole thing. Before you can do that, though, you have to make a few determinations. While trailers and campers are pretty simple and straightforward for the most part, things can get more complicated with motorhomes. Most installations are easy, but here are some common questions you’ll need to answer so you’ll know how much labor or costs will be involved:

What is the seal on an RV toilet?

You’ll typically only have to worry about one key part of the RV toilet, and that’s the seal that separates the basin from the drain and retains water. This little component is liable to become clogged if you flush anything that ought not be flushed, and it’s also prone to cracking when left for long periods without use. In this quick lesson, RV expert Dave Solberg teaches you about some of the things you should be aware of when maintaining an RV toilet, including what to do in the vent of a clog or seal crack.

What happens if the plastic on the toilet is broken?

It can sometimes be set back into place but they are held in by plastic molding on the toilet. If the plastic has broken, you will need a new toilet.

What is a flat valve on a toilet?

Depending on the model and year, your toilet valve will either have a flat “spade” valve that is a piece of flat plastic that slides back and forth into a rubber gasket that is supposed to seal and hold water, or a rounded valve in the newer style. If it doesn’t hold water, it’s time to replace the valve.

How to tell if water valve is bad?

The best way to tell is to gain access to the back of the toilet. You will see a lever going to the valve. You can manually operate this and see if water comes out, if it doesn’t the valve will need replaced.

How to clean spade seal?

I would suggest starting with a good cleaning of the rubber seal that the spade slide across. Sanitize it with a 1/4 cup bleach and gallon of water and use a popsicle stick or other disposable flat object to clean the gap all around the seal. It could have calcium or lime buildup. Otherwise you will need to take the plastic cover off the foot mechanism and the lower plastic shroud to gain access to the valve assembly. There you can see if it’s just sticking or the spring has broken or come loose.

Can you put a toilet back on?

It depends on what make and model you toilet is, but there is usually an armature or lever connected to the pedal or handle that goes to the valve and it may have come off. Sometimes it can be put back on but a lot of the time a piece of plastic has broken and needs replaced.

Do you need to bleed the shower?

Do you get good water flow to other faucets and the shower? If yes, and you do not have a water leak, just air, you need to bleed the system out. The unit was probably winterized using air to blow out all the lines, so there would be quite a bit of air to move and just stepping down on the plunger slightly would not bleed it properly. It is also faster to do this hooked up to city water as the pressure moves water much faster.

How to replace RV toilet foot pedal?

it is easy to replace, but you should use the manual and instruction guidelines properly. In this way, you can avoid any mistakes during handling. There are the following steps necessary for the toilet foot pedal replacement.

Why does my RV toilet spin in all directions?

Sometimes the inlet hoses connection loose lead to spinning in all direction which also a reason for it. If you neglect that problem , it may cause damage to your RV toilet floor.

Why does my toilet foot pedal leak?

Leakage. The toilet foot pedal is sensitive to both low and high water pressure. Sometimes O-ring in the valve causes the leakage problem. Flush valve open by the rotation of valve in the O-ring after the footstep spinning. The leakage occurs when it remains open and the flush valve also unable to close.

How many feet does a toilet pedal have?

It has two-foot pedal flush control having different functioning like open the toilet wall discharge outlet and another deliver the flush water to the tank.

What happens if your RV foot pedal is broken?

If your RV foot toilet pedal is broken, then avoid using the toilet. With the water flush, the wastage also releases out and it can cause a foul smell. There are factors responsible for its damage like rust, leakage, cold, sediment accumulation, and few others. You can replace it with a new part and resolve the issue.

How does a toilet flusher work?

It operates by the actuation cable, which contains the detachable wire member inside the conduit. The water fills in the toilet, half or maximum controls by the closure member pedal before the flush. It combines with the water pedal to actuate it to provide water for flushing.

Why do you use a towel when you wash a toilet?

Use the towel to avoid water leakage from its connection. You can wash the toilet, which protects the foul smell.

What Is An RV Toilet Foot Pedal?

The RV toilet foot pedal is simply a pedal at the base (either in front or on the side) of your RV toilet that you press down to flush the toilet.

How Does An RV Toilet Flush Pedal Work?

Although you’re probably aware of this if you’re reading this guide, RV toilets have a foot pedal or flush pedal at the base of the toilet that you press down with your foot to flush the commode after use.

RV Toilet Foot Pedal Repair – Common Issues & How To Fix

If you have an RV toilet that’s leaking at the foot pedal, you probably have a damaged intake valve or a buildup of debris or sediment around the pedal assembly.

RV Toilet Foot Pedal Repair – Step By Step Guide

Step 1: Turn the RV toilet’s water supply off, then flush the toilet to empty any additional water out of the bowl and get rid of any remaining water pressure.

Wrapping Up OUr Guide To RV Toilet Foot Pedal Repair

We hope this guide was helpful to you in resolving your RV toilet flush pedal problem.

What to do before RV trip?

Before embarking on a trip and after you return, you should make sure to complete a full inspection of the fixtures in your RV’s bathroom, including the toilet. There’s not a whole lot that can go wrong with a toilet, but preventative RV toilet maintenance and inspection can help avoid any headaches when you’re out on the road.

Can you winterize an RV toilet?

In addition to winterizing your RV toilet to prevent frozen and busted pipes, there are a few simple steps you can take to ensure you won’t need RV toilet repair. To help you figure out the best way to prevent issues with your RV toilet, Dave Solberg walks you through a quick demonstration on good RV toilet maintenance.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9