Here is the easiest way to fix your Samsung smart TV remote:
- Remove the batteries from your remote
- Unplug the TV from the wall
- Wait 60 seconds
- Plug the TV back in
- Wait till the TV comes back on
- Put the batteries back in the remote, see if it worked
How to disassemble a Samsung TV remote control?
The Samsung remote is not working. Troubleshooting your remote depends on the issue that you're having with it. If it seems like it's pressing buttons by itself, it may actually be that your remote's buttons are dirty. And if it won't work when you try to use it on your TV, there's a quick check you can perform to figure out if it's your remote ...
Why is my Samsung TV not responding to the remote?
Why is my Samsung TV not responding to the remote?
- The batteries may not be functioning. If your Samsung TV isn’t responding to the remote, one of the most common causes is that the remote’s batteries have expired or aren’t ...
- TV remote not paired. ...
- Remote sensor may not be working. ...
- Remote pointer may not be functioning. ...
- A stumbling block in front of the TV’s receiver. ...
- Problem in network connection. ...
How to reset a Samsung TV remote?
- Press menu on your box or TV remote control
- Select ‘set-up’, ‘installation’, ‘update’ or a similar option. ...
- Select ‘first-time installation’ (sometimes called ‘factory reset’, ‘full retune’ or ‘default settings’).
- Press ‘OK’ if your equipment asks if it's OK to delete existing channels and then your retune should start automatically. ...
How to open Samsung Smart TV remote control?
To open the Samsung Smart TV Remote, flip the remote over and slide the back cover down in the direction on the indicators. Sliding the backside on the remove toward the indicators will expose a small gap on the front side of the remote.
How to pair a 2013 smart TV remote?
How to reset Samsung remote to factory settings?
Why is my Samsung remote not working?
How to test remote sensor?
How to fix remote that won't turn on?
Can you ignore Bluetooth remote?
Can you clean battery terminals?
See more
About this website
Why did my Samsung TV remote stop working?
However, the most common reasons for a TV remote that is not working are battery issues, paring issues, or infrared sensor issues. Press the power button while pointing the remote control at your TV. Make sure the LED indicator on the TV blinks. If not, your remote does not have enough power remaining in the batteries.
Why is my TV not responding to my remote?
A remote control that will not respond or control your TV usually means low batteries. Make sure you are pointing the remote at the TV. There also may be something interfering with the signal such as other electronics, certain types of lighting, or something blocking the TV remote sensor.
How do I reconnect my Samsung Smart TV remote?
On most Samsung TVs, the remote control sensor is located on the lower right hand side of the TV. If not, it is directly in the bottom center. Next, press and hold the Return and Play/Pause buttons simultaneously for at least 3 seconds. Your TV will begin syncing with the Smart Remote.
How do I fix an unresponsive remote?
Section B: Checking items of the remote control (common)Make sure none of the remote buttons are jammed.Reset the remote. ... Clean the remote control terminals. ... Replace with fresh batteries. ... Perform a power reset on the TV. ... For Android TV/Google TV: symptoms may improve by updating the software of the remote control.More items...•
How do you pair a remote to a TV?
0:252:09How to Program and Pair Your Remote - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply make sure the device you want to pair. Is on press and hold the setup button on your remote.MoreSimply make sure the device you want to pair. Is on press and hold the setup button on your remote. Control until the led light blinks twice.
How do I reset my TV remote?
For Android TV models, refer to the How do I power reset my Android TV article....Reset the remote control.Open the battery compartment cover and remove the batteries.Press and hold the Power button for three seconds.Insert the batteries again and close the battery compartment cover.
How do you reprogram a TV remote?
0:524:10How to program a universal TV remote control, no code required - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne press and hold on the tv. Button. And you need the second finger to press and hold on on offMoreOne press and hold on the tv. Button. And you need the second finger to press and hold on on off power button so let's start this first press and hold. And press and hold the lights will disappear.
Can remote controls be repaired?
Even if some of the keys have stopped working or have to be pushed really hard, they can be fixed. The most common problem has to do with the keypad's conductivity with the circuit board. Open up the remote, clean it out, and apply a new coat of conductive paint to get the keys working again.
How do I reset my TV remote?
Reset the TV with the remote controlPoint the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears. ... The TV should restart automatically. ... TV reset operation is complete.
Why is my remote not working even with new batteries?
If no light appears when you have tried ALL the buttons, and as you have replaced the batteries, make sure that the battery connection terminal in the remote are clean and bright and that the batteries are held "snugly" in position not loose. If all OK then the remote is faulty.
How do I reset my TV?
Press the ACTION MENU or (Quick Settings) button. The next steps will vary depending on your TV menu options: Select System → About → Reset → Factory data reset → Erase everything → Yes. Select Device Preferences → Reset → Factory data reset → Erase everything → Yes.
How do I reset my Smart TV remote?
Remove the batteries, and then press the Power button for eight seconds to reset the remote. Then, reinsert the batteries and try to use the remote again. Check out the user manual if you need help accessing the battery compartment.
Samsung tv remote control not work? repair it by this way, easy
Broken Remote control and How to Repair Broken Remote control
Fix: Samsung TV Remote not Working except for Power Button
Turn the TV on and unplug the power directly from the socket. Unplugging TV from the wall; Press and hold the TV’s power button for 30 seconds.; Plug the power back in and turn the TV on.; Try to use the remote and check to see if the issue persists.; Solution 2: Re-Syncing the TV and Remote. It is possible that the Television and the remote got de-synced due to which the Remote’s signals ...
What to do if your remote won't work?
If it is the remote, it may need a pair of fresh batteries or a reset.
Why won't my remote work on my TV?
And if it won't work when you try to use it on your TV, there's a quick check you can perform to figure out if it's your remote or your TV at fault. If it is the remote, it may need a pair of fresh batteries or a reset.
How to clean a remote control?
1 Remove the batteries from your remote control. To eliminate the possibility that the remote is sending commands to the TV, take the batteries out. 2 Unplug the TV. With the TV powered on, unplug the TV from the wall outlet. If the TV has a One Connect box, unplug it as well. 3 Clean the touch controls.
Why is my remote not working?
The most common are physical damage, battery issues, pairing issues, or issues with the infrared sensor on the remote or TV. And if it won't work when you try to use it on your TV, there's a quick check to perform to figure out if it's your remote or your TV at fault.
How long is Samsung Careline open?
please contact our Samsung Careline or Live Chat with our Technical Team online, services are open 24 hours, 7 days.
How to test ant remote?
If you have ant digital camera (including a camera phone), you can test any remote. To test the remote, follow these steps: 1) Turn your camera on. 2) Aim the remote at the lens of the camera from about 6-10 inches away. 3) Press any button on the remote.
Can you test a second remote on a TV?
If the TV has another remote that is known to work on this TV, you can test that remote on the TV. To test a second remote on the TV, follow these steps:
How to pair a 2013 smart TV remote?
If you have the 2013 Smart Remote, you'll find the pairing button located under the battery cover.
How to reset Samsung remote to factory settings?
Samsung remotes from 2016 and newer have the ability to be reset to factory settings by pressing and holding the Back and the button to the right of the 123 button. You can find which buttons you need to press in the user manual.
Why is my Samsung remote not working?
There are many different reasons why your Samsung remote no longer works ranging from a dirty receiver to a dead battery. This wikiHow will teach you how to repair a Samsung remote using a few different methods.
How to test remote sensor?
The goal is to see an Infrared eye on the remote flashing on the LCD screen of your camera when you press a button on the remote. If you do, the remote is sending a signal and is working; however, your TV's receiving sensor might be blocked or dirty.
How to fix remote that won't turn on?
Remove the batteries and hold any button for 20 seconds. This action will clear (or attempt to clear) any electronic glitches that may be preventing your remote from working.
Can you ignore Bluetooth remote?
If you have a Bluetooth remote, you can ignore this step.
Can you clean battery terminals?
Another issue is dirty battery terminals, but you may not want to mess with them. If you notice a lot of corrosion on the battery terminals, you can either clean it or buy a new remote.
