how to repair scratched porcelain tub

1. Choose a porcelain repair kit in a color that closely matches the item you wish to repair. ...
2. Clean scratched items thoroughly with dish soap and water, and rinse well. ...
3. Sand the scratch very lightly with emery or fine-grit sandpaper. The repair kit often supplies a small piece of sandpaper.
4. Clean the scratch with denatured alcohol to remove sanding debris.
5. Apply a thin layer of filler using the applicator that comes with the repair kit if you are repairing a deep scratch -- one that gouges all the way ...
6. Level the filler with a light sanding with emery or sandpaper.
7. Apply several light coats of glaze over the filler. Allow the glaze to dry completely between coats.
8. Sand the dried glaze lightly, then buff with a clean cloth.

Full Answer

How do you repair a porcelain tub?

• Rust-Oleum 7860519 2-Part Kit, White.
• Sheffield Bronze 1126 Touch-Up, White.
• Devcon Epoxy Bathtub Repair Kit.
• Cal-Flor FL49106CF Mix2Match Repair Kit.
• American Standard 070900-0200A Touch-Up Paint, White.
• Rust-Oleum 244166 Specialty Kit.
• Sheffield Bronze 1454, White.

How to fix porcelain tub?

• Check that the kit comes with a durable resin coating for your tub. Some cheaper kits come with an epoxy coating, which chips and discolors faster.
• Refinishing kits can cost from about $30-$100 USD.
• Tub refinishing kits work to refinish all kinds of bathtubs including ceramic, porcelain, acrylic, fiberglass, and enamel tubs. ...

How to fix the chip in Your Porcelain Tub?

Things You Will Need

• Hairdryer
• 220-grit sandpaper
• Rubbing alcohol
• Cotton swabs
• Clean piece of tile or glass
• Porcelain repair compound
• High-gloss alkyd-based paint
• Putty knife
• Straight-edge razor
• Nail polish remover

How to refinish a porcelain bathtub?

• Get the highest stage HVLP blower you can afford.
• Read more about HVLP spray guns here.
• Set your HVLP gun fan at 6″ to 8″ and shoot from about the same distance.
• Turn your air pressure to the lowest you can, but keep a good atomizing pressure.
• Never over-reduce your products. ...
• Do not reduce with cheap lacquer thinner. ...

More items...

How do you get scratches out of a ceramic tub?

0:002:53removing BIG SCRATCHES from your bathtub using “toothpaste ...YouTubeStart of suggested clipEnd of suggested clipI'm going to show you how to get these scratches out of the surface of the bathtub a nylon scrubby.MoreI'm going to show you how to get these scratches out of the surface of the bathtub a nylon scrubby.

How do I fix a deep scratch in my bathtub?

If you're dealing with very deep scratches, use a porcelain repair kit. These kits have a paint-on glaze. Before applying the glaze, make sure the bathroom is properly ventilated. Apply the glaze to an entire scratched section of the tub and let it dry.

How do you fix nicks in a porcelain tub?

0:093:14How to Repair a Chip in a Bathtub and make it Disappear | DP TubsYouTubeStart of suggested clipEnd of suggested clipSo we've got the putty. Right here it's basically like a bondo all-purpose putty. And here's theMoreSo we've got the putty. Right here it's basically like a bondo all-purpose putty. And here's the hardener. Remember i always put a bead of the hardener. Across the diameter of the bondo.

How do you touch up a porcelain tub?

0:031:35DIY Bathtub Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a spackling knife or straight razor blade to scrape away the excess. And then smooth it back outMoreUse a spackling knife or straight razor blade to scrape away the excess. And then smooth it back out with your finger. Wetting your tools can help eliminate any creases or ridges in the milliput.

How do you remove metal scratches from porcelain?

To clean metal marks off a porcelain toilet, try using an acidic cleanser powder. Sprinkle the powder over the marks on your toilet. Then, rub it with a damp sponge until the marks are gone. Wipe away any residue with a damp cloth.

How do you repair a bathtub surface?

0:352:43SHURBOND Bathtub Chip Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipSimply fill any deep holes chips or imperfections in the tub surface. For leveling low areas in theMoreSimply fill any deep holes chips or imperfections in the tub surface. For leveling low areas in the tub. Use the SP 31 air drive filler by lightly rubbing the filler over the low and pitted. Areas.

Can you fix a chip in a porcelain tub?

Porcelain enamel is an attractive, durable bathtub surface, but it can chip. You can repair a chipped porcelain tub yourself with a few easily accessible materials. When the chip is in an area that is always dry, such as the outer surface of the tub, a single repair should do the job.

Is my tub porcelain or enamel?

But there's a simple item you can use to determine bathtub types in this situation: a magnet. Since enamel tubs cover cast iron or steel, they'll be magnetic. So if the magnet doesn't stick, you have a porcelain tub.

How do you fix a chipped porcelain?

0:131:49How to Fix a Chipped Sink - YouTubeYouTubeStart of suggested clipEnd of suggested clipHours before using the surface again begin by sanding the chip to smooth the edges. Then clean theMoreHours before using the surface again begin by sanding the chip to smooth the edges. Then clean the area with an abrasive cleaner and scrubbing pad rinse thoroughly and dry with a paper towel.

How do I know if my tub is porcelain or fiberglass?

Hold a magnet up to the tub; does it attract? If it's magnetic, then it's an enameled surface, but if it's not magnetic, it's porcelain.

How do you paint a porcelain tub?

How to Paint a BathtubRemove old caulk and the tub's hardware. ... Ventilate the bathroom and clean the tub thoroughly with diluted bleach, scrub cleansers, and acetone. ... Repair any imperfections along the tub. ... Mask surrounding tile and any remaining fixtures. ... If you purchased two-part epoxy, mix it now.More items...•

How do you paint a chipped bathtub?

Take a spatula or a small brush to apply a thin layer of the epoxy to any crack or chips in the tub. Wait for two to three hours until the epoxy dries up before sanding the patches down using 2000-grit sandpaper. This will help to match the finish of the parts of the tub.

How do you repair an acrylic bathtub?

1:333:05How To Fix My Bath Using The Anglo Acrylic Bath Repair Kit - YouTubeYouTubeStart of suggested clipEnd of suggested clipPlace the polythene film on top of the treated area and using light pressure smooth it outwards fromMorePlace the polythene film on top of the treated area and using light pressure smooth it outwards from the center to ensure that no air bubbles are trapped.

How do I know if my tub is fiberglass or acrylic?

Look around the tub's edges and see if it appears thinner; this could be an indication that it is acrylic. Acrylic tubs usually come in more colors than fiberglass tubs, as fiberglass tubs are commonly white. Acrylic also feels warmer to the touch than fiberglass, and tubs made of acrylic have smoother finishes.

How do you restore an acrylic bathtub?

How to Re-glaze Acrylic TubsRemove any caulk around the perimeter of the tub. ... Remove the tub's drain cover. ... Scrub the entire surface of the bathtub thoroughly with a bleach and water solution and a non-abrasive pad to remove dirt, grime and mildew. ... Sand the entire surface of the tub with 400-grit or 600-grit sandpaper.More items...

How do you get scratches out of acrylic?

1. Wet one piece of 600 grit sandpaper - run it over the scratched area in a circular motion and repeat with a dry piece of 600 grit sandpaper too. Rub with both wet and dry sandpapers for around 3 to 3 minutes. Don't worry if your acrylic looks more frosty or scratched - this will go away during the process.

How to get rid of scratches on porcelain?

Buff the paste into the porcelain with an old toothbrush, soft bristle scrub brush or a mild synthetic scouring pad meant for dishes. Do not use steel wool or anything similarly abrasive. Work in circular motions until the cleaning tool picks up most of the paste and the scratch disappears.

How to restore shine to porcelain tile?

Rinse the area with clean, cool water. Apply tile polish to a soft, lint-free rag and buff it over the freshly removed scratch area to restore shine and blend the area with the surrounding, undamaged porcelain.

How to clean porcelain with bleach?

Wipe the surface down with a dry, lint-free cloth. Dilute 1/4 cup of oxygen bleach in 4 cups of warm water. Dip a soft rag into the solution and apply it liberally to the porcelain. Let the solution sit for 15 minutes.

How to get rid of a scratch on a wall?

Create a paste with household scouring cleaner and water; the solution should be thick and slightly clumpy, not runny. Wearing gloves, apply an even layer over the scratch. Wait five to 10 minutes.

What color is epoxy repair kit?

Porcelain repair kits come in a variety of colors, but two-part epoxy is more limited, available in white, off-white and gray. Choose a product that gives you the closest color match possible.

How long does it take for enamel to dry?

Let the enamel or patch product dry completely, at least 24 hours. After seven to 10 days, gently buff the area with a paste of baking soda and water to gradually blend it with the surrounding area.

Can porcelain enamel be repaired?

Porcelain and porcelain enamel may have different bases, the former clay and the latter cast iron or stainless steel, but you can repair small scratches on the glass-like glaze or coating in the same way. When the scratch hasn't fully penetrated the outer surface, clean the porcelain before buffing out the scratch.

How to fix scratches on tub?

If scratches remain, add more baking soda and repeat. If your tub shows more prominent scratching, try a fine pore pumice stone. Before using, submerge and soak the stone in water . Rub the scratches with the wet pumice stone very briefly — not more than 30 seconds. Push down lightly with the pumice stone.

How to get scratches out of acrylic tub?

If after using dishwashing liquid and liquid polish the scratches remain in your acrylic tub, you may need to sand them out. Use fine-grit sandpaper, being sure to dampen it first. Put on a mask to prevent inhaling particles generated during the sanding process, and use protective eyewear.

How to clean kaolin clay from porcelain tub?

Start with baking soda. Pour baking soda directly onto the affected area. Scrub with a wet sponge for a few minutes. Rinse off and see how much progress was made with the scratches. If scratches remain, add more baking soda and repeat.

What to use to remove scratches from metal?

If scratches remain, use a liquid polish such as Gel-Gloss to see if you can remove the scratches with cleaning alone. This works great for surface level scratches. A metal polishing compound can also be used, according to Signature Hardware. Wear protective gloves when handling these cleaners. Advertisement.

Can you remove scratches from a bathtub?

You can remove scratches from a bathtub. Bathtubs will get scratched over time from everyday wear and tear. Instead of replacing or refacing your tub, you can clean and fill in minor scratches and chips. Bathtub scratches are repaired differently depending on the material the tubs are made of.

How to get rid of excess compound?

Using a wooden stir stick, flatten out the area and remove any excess compound. Be careful not to take off too much because it will still be sanded down smooth once the compound has had enough time to dry.

Can you paint a cracked porcelain tub?

For large cracks or chips, it may be necessary to paint the area with a high-gloss paint or glaze to match the shiny surface of the porcelain. Now that you know how to repair a cracked porcelain tub or sink, don’t be afraid to get started on that bathroom renovation. One small step at a time can lead to a dramatic new bathroom interior.

How to make a bathtub with spray and wash?

1 Lift as many corners and edges as you can on each applique. Then pour a generous amount of “Shout” or “Spray-N-Wash” over the entire floor of the bathtub. Since these chemicals will not eat through the Mylar film, these solutions have to be able to get to the adhesive beneath the applique in order to work.

What causes rust on porcelain?

Rust on porcelain is usually the result of a dripping faucet and high iron content in the water. One household remedy is scrubbing the stain with a mixture of lemon juice and salt. If scrubbing doesn’t do it, soaking might. Saturate a rag with the mixture and lay it on the blemish for a few hours. Then scrub it again.

What is the bottom layer of bathtub applique?

Keep in mind that most non-slip bathtub appliques are made in three layers: the (often decorative) top layer, a middle cushioning layer that is usually made of of Mylar film, and a sticky adhesive bottom layer. 1 Carefully peel up a corner edge of each applique.

Can fiberglass tubs be restored?

Fiberglass tubs have “gelcoat” surfaces that can be restored with a lot of rubbing and buffing. For this job, you need to get a three-part kit made for removal of fiberglass oxidation. These are sold at marine products stores. Follow the label directions.

Can a bathtub be scratched?

Includes rust and dings in porcelain, repairing fiberglass scratches, and dealing with appliques. Bathtubs can become scratched or stained over time. Depending upon the nature of the problem, there are a number of do-it-yourself remedies for cosmetic issues. If stains or scratches are too numerous—or if you want to give ...

How to get scratches out of toilet?

You can scratch your toilet by using a coat hanger or the wrong kind of auger to clear a clog, and you can inflict even deeper scratches by scraping the sides in an effort to remove grout, plaster or something else you definitely shouldn't have tried to flush. A number of gentle abrasive cleaners will remove these scratches with a little work on ...

How to remove scratches from a car?

Rub the scratched area in a circular motion. You'll have to apply some pressure, but don't overdo it. It's better to rub gently for several minutes than it is to attempt to remove the scratches quickly by rubbing aggressively.

What is the best way to remove scratches from a car?

Among the possibilities are tooth whitening powder, baking soda, an oxalic acid-based cleanser, a pumice stone and even a combination of sold ering flux and steel wool. Advertisement.

Is porcelain a glass?

Although it looks and feels glassy, porcelain isn't glass, and because it's composed primarily of clay, it is possible to rub out scratches, which you couldn't do if it were glass.